Building Filters
2021 New Holland CR9.90 FMC-OBC-PEN
- Manufacturer: New Holland
- Model: CR9.90
- Horsepower: 563 hp
- Hours: 1,520 h
FPT Cursor 12.9L, 6 cylinder intercooled turbo diesel engine 530hp rated, 571hp max boost 2 speed hydrostatic transmission - 40km/h DFR (Dynamic Feed Roll) with DFR reverser Twin Pitch 22" rotors with Dynamic Flo...
2021 CASE IH 8250 PKS-CON8250
- Manufacturer: Case IH
- Model: Axial-Flow 8250
- Horsepower: 480 hp
- Hours: 1,576 h
Case 8250 2021 Model 1175 Rotor Hours 1 owner Level and Center + Pinch point shifted 36 (full set) spiked rasp bars in the rear of rotor 36 x 10 rasp bars in front half of the rotor for additional threshing c...
2015 CASE IH 8240 TTT-6100201
- Manufacturer: Case IH
- Model: Axial-Flow 8240
- Horsepower: 75 hp
- Hours: 4,395 h
2015 Case IH 8240 4395 Engine Hours 3380 Rotor Hours Pro 700 Display 800/70R38 Front tyres 600/70R28 Rear tyres Stone Trap Powered rear axle Fronts Avaliable Located at Temora Truck & Tractor
2008 New Holland CR9070 SWT-7100160
- Manufacturer: New Holland
- Model: CR9070
- Horsepower: 415 hp
- Grain tank size: 12,333.67 L
2008 NEW HOLLAND CR9070, 2917 ENGINE HOURS, 2097 ROTOR HOURS, INTELLIVIEW 4 MONITOR WITH AUTO GUIDANCE, 900/60R32 FRONT AND 540/65R/30 REAR SINGLE TYRES, LOCATED AT SOUTH WEST TRACTORS - YOUNG
2021 New Holland CR7.90 WWM-EQ0008064
- Manufacturer: New Holland
- Model: CR7.90
- Hours: 1,014 h
1300 Engine hours, 1014 rotor hours. Machine is in good condition and has all the add ons. Duals, automation, guidance unlock to RTX, grain tank extension, straw chopper and spreader, inteliview display, remote ...
2021 CASE IH 8250 TTT-GRANT
- Manufacturer: Case IH
- Model: Axial-Flow 8250
- Horsepower: 480 hp
- Hours: 1,647 h
2021 Case IH 8250 1647 Eng Hours, 1393 Rotor Hours Pre Season Completed Pro 700 Display, Nav & 372 580/85R42 Front Duals 750/65R26 Rear tyres 2021 Macdon D145 Intersales 4 axle trailer Located Temora Truck & Tr...
$524,992 USDCobram, Australia
2016 New Holland CR9.90 FMC-CONBARNES2
- Manufacturer: New Holland
- Model: CR9.90
- Horsepower: 571 hp
- Hours: 2,334 h
New Holland CR9.90 * Build date: 23/05/2016 * Hours: E- 2,334 & T- 1,822 * FPT Cursor 13 engine rated at 540Hp. * Folding auger with pivoting spout * 14,500L Graintank with fixed bin lids (Mechanically opened) *...
2019 New Holland CR8.90 FMC-CONBARNES
- Manufacturer: New Holland
- Model: CR8.90
- Horsepower: 571 hp
- Hours: 2,472 h
2019 CR8.90 Smartrax & 2023 Macdon D145 New Holland CR8.90 Smartrax * Build date: 02/07/2019 * Second owner, this machine has been serviced by McPhersons Parts & Service for both owners. Purchased new from McPhe...
$513,580 USDCobram, Australia
2021 New Holland CR9.90 WWM-5100096
- Manufacturer: New Holland
- Model: CR9.90
- Horsepower: 563 hp
- Hours: 1,912 h
One owner machine with 1902 engine hours & 1407 rotor hours Intellisence automation, Intellicruise. Twin rotor machine with DFR (dynamic feed roll). DFR reverser. Guidance unlocked to RTX. Mav chopper, two camer...
Case IH 4R40 4000 Series
- Manufacturer: Case IH
💥 $99,000 inc GST 𝗧𝗵𝗿𝗲𝗲 𝗦𝗽𝗿𝗶𝗻𝗴𝘀 𝗕𝗿𝗮𝗻𝗰𝗵 Chris Mulder: 0428 541 170 𝗠𝗼𝗼𝗿𝗮 𝗕𝗿𝗮𝗻𝗰𝗵 Tim King: 0427 427 904 Chris Milentis: 0428 443 470 📍 𝗟𝗼𝗰𝗮𝘁𝗲𝗱 𝗮𝘁 𝘁𝗵𝗲 𝗧𝗵𝗿𝗲𝗲 𝗦𝗽𝗿𝗶𝗻𝗴𝘀 𝗕𝗿𝗮𝗻𝗰𝗵 ♦️ 𝗦𝗧𝗞: 502793 🚛 Transport can be arrang...
Case IH 8250 on tracks + MacDon D140
- Manufacturer: Case IH
- Model: Axial-Flow 8250
- Horsepower: 480 hp
- Hours: 1,491 h
♦️ 𝗨𝘀𝗲𝗱 – 𝗖𝗮𝘀𝗲 𝗜𝗛 – 𝟴𝟮𝟱𝟬 𝗔𝘅𝗶𝗮𝗹 𝗙𝗹𝗼𝘄 𝗖𝗼𝗺𝗯𝗶𝗻𝗲 1491 Engine hours & 1237 Separator hours New – 2.5 Suspended Tracks – Camso 3500 Fine Cut Chopper – 40 Blade with In-cab controlled Deluxe spreaders AFS Harvest Comman...
Australia
Case IH 8010 + 2152 45FT Front
- Manufacturer: Case IH
- Model: Axial-Flow 8010
- Horsepower: 450 hp
- Hours: 3,954 h
3954 Rotor Hrs approximately 💥 $99,000 ono 𝗧𝗵𝗿𝗲𝗲 𝗦𝗽𝗿𝗶𝗻𝗴𝘀 𝗕𝗿𝗮𝗻𝗰𝗵 Chris Mulder: 0428 541 170 𝗠𝗼𝗼𝗿𝗮 𝗕𝗿𝗮𝗻𝗰𝗵 Tim King: 0427 427 904 Chris Milentis: 0428 443 470 ♦️ STK: 502627 & 502383 📍 Located at RedMac Ag, Three...
Case IH 8230 + 3152-45ft Front
- Manufacturer: Case IH
- Model: Axial Flow 8230
- Horsepower: 510 hp
- Hours: 4,892 h
MY 2015, 4892 engine hours & 4050 Separator hours, Pro 700, 620/70 R42 Duals, Stubble mats, Top cross auger, Comb trailer. 🔥 MAKE AN OFFER – STOCK MUST GO 📍 𝗧𝗵𝗿𝗲𝗲 𝗦𝗽𝗿𝗶𝗻𝗴𝘀 𝗕𝗿𝗮𝗻𝗰𝗵 ☎️ Chris Mulder: 0428 541 170 📍𝗠𝗼𝗼...
Australia
2018 CR9.90
- Manufacturer: New Holland
- Model: CR9.90
- Horsepower: 563 hp
- Cutting width: 13.7 m
2018 NEW HOLLAND CR9.90 REVELATION COMBINE, FRONT DUALS, 1573 ROTOR HRS, NEVER REAPT LEGUMES, CERIAL CROPS ONLY ( HARVEST READY NOTHING TO SPEND ) 4.95% FINANACE, 20% DEPOSIT, 60 MONTHS. #500333/326 Don't miss ou...
Australia
2015 NH 2015 CR9.90, 2015 NH CR9.90 BASE UNIT
- Manufacturer: New Holland
- Model: CR9.90
- Horsepower: 563 hp
- Cutting width: 13.7 m
2015 NEW HOLLAND CR9.90, DUALS 90%, 2753 ROTOR HOURS, 3300 GRAIN ANALYSER, MAV CHOPPER BASE UNIT ONLY. 4.95% INTEREST, 20% DEPOSIT, 60 MONTHS. #500330 Note: 2% Buyers Premium on this Lot Don't miss out Inspection...
Australia
John Deere 9770 STS Combine
- Manufacturer: John Deere
- Model: 9770 STS
Good condition John Deere 9770 STS Combines available between 2008 and 2013 years. Located in USA and other countries. Click request price for more information.
USA