Used Agitators, Blenders, Mixers

2 Cu Ft Ribbon Blender, S/S

2 Cu Ft Ribbon Blender, S/S Used 2 cu ft stainless steel ribbon blender, approximately 12" x 24" trough, ribbon driven by 1.5 hp motor, with 3 hp chopper, portable, 208-220/440 volt.

100 Cu ft Carbon Steel Ribbon Blender

• Manufacturer: Dynamic safe

100 Cu ft Carbon Steel Ribbon Blender Used 100 Cu ft Carbon Steel Ribbon Blender, with motor drive.

Sprout-Bauer Stainless Double Agitation Mixer Feeder Conditioner 21"W X 6'L

• Manufacturer: Sprout Bauer Inc.

Model DA21-6 For continuous, high intensity mixing, agglomerating, and conditioning. Adjustable speed, retention time, and mixing intensity. Mixing chamber is constructed with 3/16" stainless plate with a bottom-...

Drum Hoop Mixer

Drum Hoop Mixer Used Drum hoop mixer, meant for 20" L x 12" diameter drum, 0-26 RPM operating speed, with 0.5 hp motor, serial# 09-189, built 2010

1985 RIETZ BEPEX Ribbon Blender Surge Tank C-46-K3210

• Manufacturer: Bepex

Rietz Ribbon Blender Tub size 120" L X 50" W X 48" Deep. Stainless steel construction with steam jacket rated for 60 psi. @ 200 degrees. Single ribbon agitation with 3" end sanitary discharge. Half open top with ...

1985 RIETZ BEPEX Ribbon Blender Surge Tank C-46-K3210

• Manufacturer: Bepex

Rietz Ribbon Blender Tub size 120" L X 50" W X 48" Deep. Stainless steel construction with steam jacket rated for 60 psi. @ 200 degrees. Single ribbon agitation with 3" end sanitary discharge. Half open top with ...

Tri Clover Tri Blender, Model F3218, S/S

• Manufacturer: Tri-Clover
• Model: F3218

Tri Clover Tri Blender, Model F3218, S/S Used Tri Clover Tri Blender, model F3218MD-B40, stainless steel construction, approximately 8" diameter impeller, 1.5" liquid inlet, 3" powder inlet, 2" slurry outlet, in ...

(3) Clamp on Lightnin agitator drives

• Manufacturer: Lightnin

(3) Clamp on Lightnin agitator drives Used lot of (3) Clamp on Lightnin agitator drives.

Lightnin Air-Operated Agitators, (3)

• Manufacturer: Lightnin

Lightnin Air-Operated Agitators, (3) (3) Used Lightnin agitator drives, air operated, clamp mounted.

0.75 HP Anchor Agitator Drive

0.75 HP Anchor Agitator Drive Used 0.75 hp Anchor agitator drive, 230/460 volt motor drive, mounted on stainless steel bridge, designed for approximately 14.5" diameter x 11.5" deep tank, stainless steel shaft an...

Stainless Steel V-Cone V-Shape Mixer Blender w/ Intensifier - 30 Cu/Ft

Stainless steel vessel with a diameter of 36". Required minimum clearance for swing radius: 107" from base elevation. Twin top hatches, 18" diameter. Discharges through a 10" pneumatic butterfly valve. Max. Worki...

3 Cu.Ft. Bectochem V Blender, S/S

• Manufacturer: Bectochem

3 Cu.Ft. Bectochem V Blender, S/S Used 3 Cu.Ft. Bectochem twin shell blender, model GMP, type Y Blender, stainlesss steel construction, on stand, cantilever design, with solid covers, manual butterfly value disch...

15 Cu Ft Gruendler Ribbon Blender, C/S,

• Manufacturer: Gruendler Crusher & Pulverizer Co

15 Cu Ft Gruendler Ribbon Blender, C/S, Used 15 Cu Ft Gruendler ribbon blender, model 01, carbon steel construction, approximately 24" wide x 60" long trough, double ribbon agitator, outboard roller bearings, cha...

0.33 HP Lightnin Agitator Drive

• Manufacturer: Lightnin

0.33 HP Lightnin Agitator Drive Used 0.33 hp Lightnin agitator drive, 120 volt ac, 90 volt dc, clamp on design, serial# R0543294102.

40 Cubic Foot Vertical Auger Mixer Blender

ITEM #: 14918 Used 40 Cubic Foot Vertical Auger Mixer Blender All carbon steel construction. 48"Ø mixing hopper fixed to elevated stand. 12"Ø auger powered by 5HP gearmotor (requires 230/460VAC, 60Hz, 3 phase)....