Used Leather

DCR-BHS - BOOT HEAT SEALING MACHINE

One of the key machines in the Goodyear shoe manufacture process. The heating element quickly heats the guide iron up as soon as the machine is turned on. Then the rubber sole and the welted upper are presented t...

DCR-SSL STAPLE SIDE LASTING MACHINE

One of the key machines in the Goodyear shoe manufacture process. The staple side laster creates staple from a wire reel, and then bends and hammers them into the shoe. The staples are forced through the insole r...

DCR-EA420 SPLITTER

• Manufacturer: DCR Machines

Rebuilt 420mm splitter with top and bottom driving rollers for splitting automotive head rest covers – with variable speed control and special (split – stop – reverse) facility for half splitting straps, panels, ...

DCR-GIS - GOODYEAR INSEAM STITCHER (BALLET SHOES)

• Manufacturer: DCR

GIS specialised for ballet pointe shoes. The GIS stitches the upper through the channeled lip of the insole. The shoe is offered up to the machine with the sole facing up. The operator can then use the treadle at...

DCR-EC75 EDGE CEMENTING MACHINE

The machine is used for applying glue ( cement) by way of a gravity fed bottle. The driven bottom roller allows the material to be pulled through and coated with glue For use in manufacturing leathergoods, wallet...

Elettrotecnica BC269 STEAMER

Elettrotecnica BC269 Steamer for steaming shoe uppers prior to lasting

DCR RCM100- ROLLER CEMENTING MACHINE

This machine is for gluing leathergoods, synthetic leather, cardboard, vinyl etc. using latex or solvent glues. Available with gluing working widths from 100-1000mm. Variable drive motor. Easy setup and dismantli...

DCR 2SB Double Band Sanding Machine

DCR 2SB Double band sanding machine – perfect for orthopaedic shoes 3 phase with high speed double end drive motor With built in extraction system and dust collection tray Supplied with 70mm x 40mm sanding bands

DCR-THP Travelling Head Press

Our travelling head presses come in a variety of table sizes, head sizes and tonnages. Manual operating system and back feed rollers (25T) 1600 x 500 table 500 x 500 head Manual operating system and back feed rol...

DCR-BP60 BEAM PRESS

60 ton beam press Fully CE certified with light curtains and additional guarding. 1600mm wide beam, with 1600 x 800 cutting area. 3 phase 2 hand safety trip

DCR-BFP100 BELT FED PRESS 100T

100 ton belt fed automatic beam press with 2000 x 1500 beam and cutting area with a 3m feed in and a 2m feed out system. Can be used for cutting larger or high production automotive, aerospace and marine interior...

DCR TPP- TOE PUFF PRESS

This single station bench mounted toe puff press is available in single phase. Using heat, pressure and time to achieve perfect toe caps. For mens, ladies and childrens shoes.

DCR SC1000- Strip Cutter 1000mm

• Manufacturer: DCR Machines

This 1000mm machine has an open left side so you can feed sheets wider than 1000mm We have various size strip cutting machines from 210mm up to 1200mm Used to cut leather, rubber, plastic etc Easy change spacers ...

PROCRT-3016F

• Manufacturer: DCR Machines

The ProCRT Series is specialised for cutting, routing & milling composites. If you need multiple toolheads for multiple materials then the CRT is the right machine as it can also be used for punching, creasing an...