Used Presses in Lombardy, Italy

200-TON 2-SHOULDER HYDRAULIC PRESS (TO BE VERIFIED)

• Manufacturer: PRESSA IDRAULICA A 2 SPALLE DA 200 TON (DA VERIFICARE)

WITH 500MM HIGH FRONT AND REAR PHOTOCELLS IN COMPLIANCE WITH THE STANDARDS PUSHBUTTON AND PEDAL CONTROLS, NEW ELECTRIC PANEL WITH PLC LOWER TIER 1200X660 - UPPER TIER 1200X660 PASSAGE BETWEEN THE SHOULDERS 120...

PROOFING PRESS PFC PR2

PFC 09950 USED MOLD TESTING PRESS Removable and tilting table Closing force max Ton 20 Max opening force Ton 10 Upper table dimensions mm 750x1100 Lower table dimensions mm 750x1100 Opening min max 85- 985 Movabl...

COLD PRESS ITALPRESSE 3000X1200

• Manufacturer: Italpresse

COLD PRESS 3000X1200 MM 3 CYLINDER 40 TON 3 KW 380V

GIGANT 60 TON C-NECK HYDRAULIC PRESS mod.GTPE

• Manufacturer: PRESSA IDRAULICA GIGANT 60 TON A COLLO DI CIGNO mod.GTPE

GIGANT 60 TON C-NECK HYDRAULIC PRESS mod.GTPE GUIDED MALLET HAMMER PLANE 800X500, DISTANCE TO THE CENTER 350, HAMMER STROKE 450 FULL OPEN LIGHT 750, ENGINE HP 10 IT GOES DOWN FAST, SLOWS DOWN, PRESSES AND COM...

OMCN PRESS ART.280/RM

• Manufacturer: OMCN

WTON 09740 MOBILE PISTON HYDRAULICS Power Ton 300 Width between shoulders mm 1500 Light mm 910 Piston stroke mm 500 Rapid power pack capacity at 1' lt. 80 Slow power pack capacity at 1' lt 7.5 Rapid stem speed 1'...

HYDRAULIC PRESS/SPUNGER, APPROX. 40 TON

• Manufacturer: PRESSA/SMATAROSSATRICE IDRAULICA DA 40 TON??? CIRCA

WITH 4 COLUMNS DIAM.80 AND WITH CENTRAL CYLINDER THE UPPER MOLD HOLDER IS GUIDED BY 2 COLUMNS PASSAGE BETWEEN COLUMNS: ___ CYLINDER STROKE: _______ FULL LIGHT OPEN:________ MACHINE FULLY ENCLOSURE WITH A PAI...

HYDRAULIC PRESS/SPUNGER, APPROX. 40 TON

• Manufacturer: PRESSA/SMATAROSSATRICE IDRAULICA DA 40 TON??? CIRCA

WITH 4 COLUMNS DIAM.80 AND WITH CENTRAL CYLINDER THE UPPER MOLD HOLDER IS GUIDED BY 2 COLUMNS PASSAGE BETWEEN COLUMNS: ___ CYLINDER STROKE: _______ FULL LIGHT OPEN:________ MACHINE FULLY ENCLOSURE WITH A PAI...

HYDRAULIC PRESS OMB 63 #ITA4020

TABLE 750X700,ALL OPEN LIGHT700,POKER TOUR FULL METAL AWARDS

STANKO MECHANICAL PRESS

• Manufacturer: Stanko

STANKO IMPORT 07574 GOOSENECK Power Ton 100 Table size mm Mace size mm Plane/hammer clearance mm Stroke adjustable from mm 0 to 320 Strokes per minute 46 COMPLETE WITH: USED MACHINE

OTI 250 TON FRONT C-NECK PRESS WITH PNEUMATIC FRICTION INTERNAL CLUTCH,

• Manufacturer: OTI

MAT 644 RACE 200 20 SHOTS MAZZA100 ADJUSTMENT CV20 TABLE 770X1100 500X800 MACHINE TOP FULL OPEN LIGHT 620 MOTORIZED HAMMER WITH OIL COLLECTOR AUTOMATIC LUBRICATION WITH BALANCING CYLINDERS DIMENSIONS 21...

FAMA HOT PRESS - electric heating

• Manufacturer: FAMA

HOT PRESS FAMA - electric hobs FAMA HOT PRESS FAMA 2250X1250 ELECTRIC HEATING HOB SPECIAL OPENING 600 MM requires lower hole or rise with beam, or possibility of opening reduction.

4 COLUMNS HYDRAULIC PRESS #ITA3911

ALLOPEN LIGHT 900, TABLE 1250X1250

TIGER 2500X1350 HOT PRESS

• Manufacturer: Tiger

HOT PRESS TIGER 2500X1300 4 CYLINDERS D. 85 90 TON THRUST NEW OIL SEALS NEW PLANS

1995 UTAS GR3 Mold Testing Press

Mold Testing Press UTAS GR3 year 1995 with control unit, cycle programming keyboard, wax injector device.

GALATO T35 TL/V-SM PRESS

• Manufacturer: Galato

GALATO 09935 C-NECK PRESS Nominal force: 350 kN Adjustable stroke: 11-78 mm Strokes per minute: 122 Slide adjustment: 50 mm Clearance at bottom dead center: 275 mm Maximum clutches per minute: 35 Maximum flywheel...