Used Weaving in Overijssel, Netherlands

Fischer-Poege - Knoopgestel

• Manufacturer: Fischer Poege

Fischer-Poege knoopgestel voor FA series, L = 190cm

2010 Vamatex - Leonardo Silver HS

• Manufacturer: Vamatex

1 pc Vamatex Leonardo Silver HS, ww 3600 mm With Stäubli electronic dobby type 2670B/2, 12 levers, 5 levers installed, 8 colour machine, 4 LGL weft feeders, 6 heddle frames, 4 half warp beams, Ø 100 mm, big roll ...

knotting frame for FA knotting machine

Fischer Poege knotting frame for FA knotting machine, Ww 440 cm, clamp rod type, Complete in all respect.

2012 Kohl - center winder for winding on A-frame type 350

Kohl center winder for winding on A-frame type 350 ww 220 cm Including A –frame with Boschert chuck bearings.

1994 Dornier - rapier looms – type HTVS 8S – ww 220 cm

• Manufacturer: Dornier

1 pc. Dornier rapier loom, type HTVS 8/S, ww 220 cm, nominal width 220 cm, AT panel, Stäubli dobby type 2600, 20 undermotions installed, 8 colour machine, 3 ECS, 4 weft feeders, warp stop motion, 8 heddle frames ...

9x Sulzer - TW11 213 ES 105 E10 D1

• Manufacturer: Sulzer
• Model: TW 11

Location: TTM-Holland Warehouse Sulzer TW11 213 ES 105 E10 D1 cam motion, under motions installed: 6 pcs. single colour machines, Loepfe weft insert brake, single beam execution (full beam), and upper beam device...

81x weefkammen voor Dornier MNB230

• Manufacturer: Dornier

Breedte 237 cm. J Type. 15″ hoogte (380mm) 16 pcs 16″ hoogte (405 mm) 65 pcs Met Quick Style Change (QSC) Pneumatic Shaft Link (PSL) Ook Leno kammen en hevels beschikbaar.

2001 Dornier - HTV2/E rapier loom, ww 360 cm

• Manufacturer: Dornier
• Model: HTV

Dialog Panel 2 Stäubli cam motion, type 1661 4 levers installed 2 ECS installed 2 weft feeders type Iro Chrono X2, Warp stop motion 4 heald frames 1 warp beam Ø1000mm Big roll batcher with weavers bridge 1x Dorni...

2005 2x Staubli - jacquards, type CX870

format 1408 1344 hooks installed M5 modules JC5 controller cardan shaft 2 pcs. Stäubli jacquards, type CX870

1992 2x Dornier - HTV2/SD ww 210 cm

• Manufacturer: Dornier
• Model: HTV

AT panel Stäubli mechanical dobby type 2117 10 levers installed 2 color machine, 2 weft feeder Roj X3 warp stop motion 6 heald frames 1 warp beam Ø1000 mm, big roll batcher with weavers bridge 2 pcs. Dornier HTV2...

Sulzer - projectile loom P7100 B 360 N2 EP Q D1

• Manufacturer: Sulzer
• Model: P7100

cam motion 6 levers installed 2 colours elec. warp let off elec. weft tensioner 6 heald frames 1 full warp beams Ø 1000 mm 2 weft feeders IRO/Roj side tuckers installed center tucker, big roll batcher 1 pc. Sulze...

2011 5x Dornier - rapier looms PTS-4 C / PTS-4 D, ww 360 cm

• Manufacturer: Dornier

FT panel with Stäubli dobby, type S2668/2 8 levers installed PSL pneumatic shaft link 4 colour machine 4 ECS 4 weft feeders type Chrono X3 with EFC weft insert brake warp stop motion, 4 heddle frames 1 warp beam ...

2010 2x Dornier - AWS 4/S D airjet looms, ww 540 cm

• Manufacturer: Dornier

Location: Germany Direct drive with FT panel Stäubli dobby 6K installed 4 colour machines warp stop motion EWL elec. warp let off ECT elec. fabric winding 4 heddle frames 4 weft feeder IRO Superelf X2 1 warp beam...

5x warp beams for Picanol rapier looms

• Manufacturer: Picanol

Location: TTM warehouse 5 pcs. warp beams for Picanol rapier looms (Gammax-Optimax-Ultramax) beam length 3970 cm, Ø 215 mm, flanges aluminium Ø 1000 mm, Q3 With take up for mounting Picanol adaptors.

1998 Monti Antonio - belt press for pre-stretching of continuously knitted pieces

• Manufacturer: Monti

Location: Warehouse TTM Holland Monti Antonio belt press for pre-stretching of continuously knitted pieces Ww 1300 mm (51 inch), with automatic stacker. The machine has no integrated boiler. • Introduction with u...