Used Tanks & Kettles in Bremen, Germany

3000 liter tank, Aisi 304

• Manufacturer: ALFA-LAVAL

remarks: Manhole approx. 400 x 510 mm; 2 pipes inside the tank

6000 liter tank, Aisi 304

remarks: manhole diameter appr. 470 mm in the upper bottom; rungs inside the tank (see pictures)

2645 liter tank, Aisi 304

• Manufacturer: Rieger

remarks: 1 manhole approx. 340 x 440 in the front bottom; Test pressure according to the nameplate 2 bar

630 liter tank, AISI 316

notice: some residues of previous content, manhole cover plated

3500 liter tank, Aisi 304

remarks: Diameter manhole appr. 455 mm; smaller dents in the inner cylinder; insulation cover of the lower bottom by plate of mild steel; tank 7061-2 with dents in the insulation jacket and an outlet DN 65 11851

19499 liter tank, Aisi 316

remarks: 3 loose bearing shells made of Fe (galvanized); 1 manhole appr. 300 x 395 mm in the front floor; reinforcement ring made of mild steel around the outside of the cylinder

15500 liter tank, Aisi 304

remarks: bearing shells cut-off below; 1 manhole diameter 430 mm in the front bottom; former connections welded closed

5000 liter standing pressure tank, Aisi316

• Manufacturer: Becker Tanks

max. allowable working temperature: 50 °C Volume: 5.000 liter | Max. excess pressure: 5,0 bar | Stand type: legs height adjustable | Quantity legs: 4 Piece | Diameter inside: 1.793 mm | Cylindrical height: 1.500 ...

8000 liter tank, Aisi 304

remarks: pipelines inside the tanks; in the case of one tank the outlet is cut off; the other tank was re-welded in several places on the central cylinder weld

1000 Liter tank, Aisi 316

• Manufacturer: Waldner

remarks: Tanks are slightly out of round due to their design; tanks with small (sometimes slightly larger) dents; some of the tank feet are pressed into the lower bottom; tank lids are made of plastic (2 containe...

11000 liter tank, Aisi 316

remarks: 1 manhole diameter 500 mm in the lower cylinder area; 1 hand hole NW 200 in the upper cylinder area (attention: manhole cover and hand hole cover made of Aisi 304); Tank with adhesions inside; slight rus...

500 liter tank, Aisi 304

remarks: Slight differences in the design of the tanks; tanks slightly out of round and with smaller dents; tanks do not have a bottom outlet; Feet partly slightly bent; One of the lids has 1 round sheet metal cu...

500 liter tank, Aisi 304

remarks: Tank slightly out of round; Parts of the butterfly valve are lower than the lower bottom (take this into account when setting up the tank); outlet slightly curved upwards; Tank with dents in the transiti...

300 liter tank, Aisi 304

remarks: Tanks slightly out of round (caps do not fit completely on the tanks; 1 x cap knob is missing); Outlet with screwed-on tap (internal diameter of pipe approx. 12 mm); Tank 1: 1 connection is pressed into ...

1700 liter tank, Aisi 304

remarks: Adhesions and metallic discoloration inside the tank; lower bottom with smaller dents