Used trailer

Conow tilting bridge with wide-wall superstructure 80 cm high, variant 2.1

• Manufacturer: Conow

Floor panel 4 mm thick Profiled laser-welded drop sides Front and rear wall and right-hand side are firmly welded to the tipper body Left-hand full-length pendulum dropside with full-length central locking, opera...

Conow HW 80 V4.2.3

• Manufacturer: Conow

- Tipping bridge with combined superstructure suitable for transporting chaff and grain - body 120 cm high with 40 cm extension - tiltable to the left (on request also tiltable to the right) - profiled laser-weld...

Conow HW 60 V2.5

• Manufacturer: Conow

- Tilting bridge with wide wall structure 95 cm high - tiltable on both sides with two center stanchions - front and rear walls are firmly welded to the tipper body - both sides with pendulum tailboards, center s...

Conow HW 60 V3.2

• Manufacturer: Conow

- Tipping bridge with combined superstructure 95 cm high - front, rear and one side wall are each continuous drop sides and are firmly welded to the tipping body - the other side wall can be opened completely via...

Conow

• Manufacturer: Conow

Conow HW 80 V3.2

• Manufacturer: Conow

Tipping bridge with combined superstructure 95 cm high - tiltable to the left (tiltable to the right on request) - front, rear and one side wall are continuous drop sides and firmly welded to the tipping body - t...

Conow tipper bridge with body 95 / 90 cm high

• Manufacturer: Conow

- left side tiltable (on request tiltable to the right side) - left sides with longitudinally divided profiled laser-welded drop sides, - left side is equipped with upper pendulum drop side and lower drop side - ...

Conow HW 80 V4

• Manufacturer: Conow

Tipping bridge with multi-purpose superstructure V4 - tipper bridge with wide wall body 120 cm high - left side tiltable (or right side tiltable on request) - left side with two pendulum drop sides, middle stanch...

Conow HW 80 V1

• Manufacturer: Conow

- Tipping bridge with superstructure - tiltable on both sides - 2 x front/rear wall below - 2 x front/rear wall above - left and right side walls divided lengthwise - upper drop side is pendulum mounted - the low...

Conow HW 60 V1 standard version

• Manufacturer: Conow

This design is the conventional superstructure as we have known it for years with the trailers HW 80 and HW 60. This body is characterized by its versatility, whether for loading grain to transporting manure or b...

Conow HW 60 V3.1

• Manufacturer: Conow

- Tipping bridge with combined superstructure 95 cm high. - front, rear and one side wall are continuous drop sides and firmly welded to the tipping body - the other side with two longitudinally divided drop side...

Conow HW 60 V2.1

• Manufacturer: Conow

- Tilting bridge with wide wall 95 cm high - tiltable on one side, without center stanchion - Tipping bridge on the tipping side with reinforced outer frame profile 6 mm, - front and rear walls are firmly welded ...

Conow HW 80 V4.2.1

• Manufacturer: Conow

- Tipping bridge with combined superstructure suitable for transporting chaff and grain - body 120 cm high with 40 cm extension - tiltable to the left (on request also tiltable to the right) - profiled laser-weld...

Conow HW 80 V4.2

• Manufacturer: Conow

- Tipping bridge with combined superstructure 120 cm high - tiltable to the left (on request also tiltable to the right) - front, rear and one side wall are continuous drop sides and firmly welded to the tipping ...

Conow HW 80 V9 / V9.1

• Manufacturer: Conow

The multi-purpose body variant 9 is a universally applicable body. Due to its extraordinarily stable design and good sealing, all transport goods, from silage/chaff, wood chips, manure to grain, can be transporte...