- Trusted Seller
Fives North Armerican Combustion Hiram 4575-12 High Velocity Gas Burner 12in
- Manufacturer: FIVES NORTH AMERICAN COMBUSTION
“New without Factory Packaging” Model number: 4575-12 | Model line: HIRAM | Mpn: 4575-12 | Shipping weight: 403 lbs | Shipping dimensions: 57 x 30 x 30 in | Reference sku: 1027908
- Trusted Seller
Hydrobotic SEACLOPS 500 Underwater Rov Remotely Operated Vehicle With Controller
- Manufacturer: HYDROBOTIC
“CASES INCLUDED” Model number: SEACLOPS 500 | Mpn: SEACLOPS 500 | Shipping weight: 303 lbs | Shipping dimensions: 51 x 47 x 43 in | Additional notes: CASES INCLUDED | Reference sku: 1039027
- Trusted Seller
Supramatic A460
- Manufacturer: Supramatic
Machine type: Process Equipment | Machine location: Idaho | Stock #: 428894 | – bowl volume: 60.0 liter | – max. bowl speed: 2,850 rpm | – bowl diameter id: 18.5″ | – max g-force: 1,750 | – process capacity: 5 t...
- Trusted Seller
2021 Provisur SX330
- Manufacturer: Provisur
Includes: -Formax -SX Honing System -2 Blades -Leg Extension Insert -Cart for Parts
- Trusted Seller
2019 JBT 8940013
- Manufacturer: JBT
It was designed to run agricultural bulk containers as tall as 46”, with a max base of 48” x 48”. Energy efficient, high volume bin cleaning system Overall length – 40 feet Overall length with set-off left side 2...
- Trusted Seller
Maxon 080KDZERLE-000001
- Manufacturer: Maxon
Maxon Kinedizer Burner #080KDZERLE-000001 Machine type: Process Equipment | Machine location: Ohio | Stock #: 645454 | Additional specs: 8″ Kinedizer LE, 15.8 MBtu/hr. Low Emissions | Burner fuel: Natural Gas – N...
- Trusted Seller
Mekatronics Ultrabind Plus ULT-7
- Manufacturer: Mekatronics
Machine type: Process Equipment | Machine location: California | -spine milling thickness: Up to 3.5″ | -book height range: 4″ – 16″ | -book width range: 3″ – 15″ | -electrical requirements: 220V, 3P, 60Hz
- Trusted Seller
1993 Liquid Carbonic STD CO2 L.H WCCF
- Manufacturer: Liquid Carbonic
-Speed: 47.1 fpm @ 80 Hz -Swell: 5.8 min @ 80Hz -Cryogen Injection System Normal Operating Pressure: 260/265 PSI -Cryogen Number of Headers: 8 -Dimensions: 152.5″ x 192″ x 162 1/8″
- Trusted Seller
Azco FG400SP
- Manufacturer: Azco
Clean Guillotine Cutting Action Machine type: Process Equipment | Machine location: New Jersey | Stock #: 962025 | Max material width: 400mm (approx. 15.75″) | Servo-driven for accuracy: Reliable cut-to-length co...
- Trusted Seller
2021 SnowBall Machinery SNCF-600
- Manufacturer: SnowBall Machinery
Machine type: Process Equipment | Machine location: Upon Request | Stock #: 639717 | -capacity: 600L | -pneumatic requirements: 6 bar, 6L/min | -electrical requirements: 220V, 3P, 60Hz | -dimensions: 55.12″ x 35...
- Trusted Seller
2020 Convectium 710 Shark 010-0707100-0007-0A
- Manufacturer: Convectium
Fill up to 100 devices at a time in less than 60 seconds Dual heat injection system (Max temp of 125C) 120 PSI Maximum Pressure / Ultra-Quiet – Only 60 decibels
- Trusted Seller
2013 Frick XLP2-1012-503
- Manufacturer: Frick
335 Evaporative Tons Rated for R-717 and R-134a Refrigerants Base Heat Rejection = 6953 MBTUH 30 HP Fan Motor (2) 5HP Pump Motor Also Included: Mycom 200VLG Rotary Screw R-717 Refrigerant Compressor 400HP 480V 3P...
- Trusted Seller
Mikro-ACM-Pulverizer, Model 60ACM, 60 HP
- Manufacturer: Mikro
Mikro-ACM-Pulverizer, Model 60ACM, 60 HP Used MikroPul ACM air classifying mill pulverizer, model 60ACM, carbon steel construction, 3000 rpm max main shaft, with 60 hp, 220/440 volt motor,1700 rpm motor, separato...
Cleveland, OH - Trusted Seller
Mikro-ACM-Pulverizer, Model 60ACM, 75 HP
- Manufacturer: Mikro
Mikro-ACM-Pulverizer, Model 60ACM, 75 HP Used MikroPul ACM air classifying mill pulverizer, model 60ACM, carbon steel construction, 3000 rpm max main shaft, with 75 hp, 230/460 volt motor,1800 rpm motor, separato...
Cleveland, OH - Trusted Seller
20" x 37" Rotex Screen, 2 Deck, Model 12
- Manufacturer: Rotex
20" x 37" Rotex Screen, 2 Deck, Model 12 Used 20" x 40" Rotex screen, model 12, stainless steel decks and bottom pan, aluminum cover, two-deck design on stand with 1 hp, 208-230/460 volt motor.
Cleveland, OH 
Arburg 270 C 400-100 Injection Molding
- Manufacturer: Arburg
- Model: 270 C 400-100
Good condition Arburg 270 C 400-100 Injection Moldings manufactured in 2003. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
