Used Construction in Baden-Württemberg, Germany

Circular formwork especially for tank construction

We offer on order a special circular formwork for tank construction. With this special circular formwork, containers up to 16m in diameter and 6m in height are possible. Smaller diameters can also be created. inc...

Wheelbarrow

Wheelbarrow

Cleaning system for formwork accessories

We offer new cleaning systems for formwork accessories. These machines clean your shuttering accessories gently with pyramid blocks and effectively at low cost. If you are interested, please feel free to send us ...

2020 Peri Maximo

• Manufacturer: Peri
• Model: MAXIMO

We can offer used Peri Maximo formwork with accessories in different sizes. If you are interested please send us your enquiries.

Doka Doka Framax Schalung 330 + 270 +135

• Manufacturer: Doka
• Model: Framax

We offer good used Doka Framax formwork in 330 + 270 + 135. The formwork is in very good condition and is ready for immediate use from stock.

brake straps

• Manufacturer: brake straps

1 strap woven, length ap. 1.730 mm, wide 100 mm, thickness ap. 11 mm 1 strap woven, length ap. 1.500 mm, wide 70 mm, thickness ap. 8 mm ...

bevel gear MENCK M 90 (?)

• Manufacturer: bevel gear MENCK M 90 (?)

probably suitable for longitudinal drive shaft, with 41 teeth rusty, probably unused

rope pulley

• Manufacturer: bmb baumaschinen beyer

rope pulley with needle bearing. Outer Ø of pulley ap. 390 mm, inner Ø in bushing ap. 70 mm. Largest width (at the hub) ap. 90 mm. 2 pcs. available! (1 pc. good / 1 pc. defec...

hitch (2 pcs.)

• Manufacturer: hitch (2 pcs.)

with pin retainer and counter safety device (both spring-loaded) good condition, functional checked

man cage «Voggenreiter»

• Manufacturer: MAN

Drag-bar with Ø ab. 42 mm + anchor can be unscrewed

Tension anchor

• Manufacturer: bmb baumaschinen beyer

Drag-bar with Ø ab. 42 mm + anchor can be unscrewed ready-to-use

LEFFER (?)

• Manufacturer: LEFFER

one side with round / other side with square cutting edge

rope pulley

• Manufacturer: rope pulley

rope pulley with inserted bushing. Outer Ø of pulley ap. 390 mm, inner Ø in bushing ap. 70 mm. Largest width (at the hub) ap. 70 mm. good condition. 2 pcs....

rope pulley

• Manufacturer: bmb baumaschinen beyer

rope pulley with 2 grease nipples and inserted bushing. Outer Ø of pulley ap. 320 mm, inner Ø in bushing ap. 70 mm, without bushing ap. 78 mm. Largest width (at the hub) ...

Monkeys, falling weights

• Manufacturer: bmb baumaschinen beyer