Construction » Gauteng

Building Filters

25

Used frames in Gauteng, South Africa

  • Trusted Seller
    Auction
    800 kVA Diesel Generator Open

    800 kVA Diesel Generator Open Frame Cummins Engine x 1

    • Manufacturer: Cummins

    Heavy-duty 800 kVA open-frame diesel generator set, driven by a V12 Cummins VT23G industrial V-engine coupled to a Wollgruber (Austria) alternator. This generator was previously used as an emergency/standby power...

    Vanderbijlpark, South Africa
    Visit Auction Website
  • Vibratory Hammer for Compaction of

    Vibratory Hammer for Compaction of Soil and Bituminous Mixtures (UTS-D680-T)

    • Horsepower: 2 hp

    Design and Testing of Bituminous Mixtures Product Codes: The UTS-0680 Vibratory compaction apparatus are used for preparing the test specimens of bituminous mixtures and soils. R.D. (Percentage Refusal Density) S...

    Alberton, South Africa
  • Cross Beater Mill (LAG490)

    Cross Beater Mill (LAG490)

      With cast iron grinding assembly, cast iron cross beater and hardened steel baffle plates, 400V 50Hz The Cross Beater Mill LAG490 is suitable for coarse and fine size reduction, either in batches or continuously....

      Alberton, South Africa
    • Piggy Back System

      Piggy Back System

        Piggy Back system Piggyback system (Optional system) This system is used if you want to load your cement from a Silo with a screw conveyor. Not only reduce its cement dust, but no labour is needed to load cement ...

        Kempton Park, South Africa
      • Fermel TMech - Load Haul

        Fermel TMech - Load Haul Dumper 400LP

        • Manufacturer: Fermel

        A compact low profile 4 Ton capacity machine equipped with a Z-Link boom for increased tipping height and break-out forces. Operator’s cabin situated on the front frame, yielding good operator visibility despite ...

        Gauteng, South Africa
      • Fermel MED Compactor 8000

        Fermel MED Compactor 8000

        • Manufacturer: Fermel

        A mining compactor with an eight ton gross vehicle mass, that is hydrostatically driven and features both rear and drum drives. It features a side mounted cabin, to lower the operating envelope to allow its use i...

        Gauteng, South Africa
      • Fermel FLP Compactor 10000

        Fermel FLP Compactor 10000

        • Manufacturer: Fermel

        A mining compactor with a ten ton gross vehicle mass, hydrostatically driven and features both rear and drum drives. Top-centre, enclosed, ventilated cabin, for excellent peripheral visibility. Vibration isolatio...

        Gauteng, South Africa
      • Sieve Segregation Test Set (UTC-0518)

        Sieve Segregation Test Set (UTC-0518)

          Fresh Concrete Testing Product Codes: Description: The UTC-0518 Sieve Segregation Test Set is used for determining the resistance to sieve segregation of Self Compacting Concrete. The Sieve has 5 mm square apertu...

          Alberton, South Africa
        • TAG Open Cup Flash Point

          TAG Open Cup Flash Point Tester (UTB-1360)

          • Horsepower: 1 hp

          Bitumen and Bituminous Binders Product Codes: Description: The UTB-1360 TAG Open Cup Flash Point Tester is used for determination of flash points of. The test set consists of an electric furnace with electronic c...

          Alberton, South Africa
        • Reflux Extraction Test Set (UTAS-0013)

          Reflux Extraction Test Set (UTAS-0013)

          • Dimensions: 13 in

          Analysis of Bituminous Mixtures Product Codes: Description: The Reflux Extractor is used for the quantitative determination of bitumen in hot-mixed paving mixtures and pavement samples. The bitumen content is cal...

          Alberton, South Africa
        • Vibrations on machine foundations (TM

          Vibrations on machine foundations (TM 182)

            vibrations generated via imbalance Description: An indispensable part of machine design is the reduction of vibrations. For example, an elastic, vibration-isolating setup of the machine avoids disruptive vibratio...

            Alberton, South Africa
          • Length Change of Hardened Concrete

            Length Change of Hardened Concrete and Hydraulic-Cement Mortar (UTC-1153)

              Hardened Concrete Testing Product Codes: Description: The moulds are used for preparing the specimens for the purpose of determining the length changes (shrinkage/expansion) in hardened concrete and hydraulic cem...

              Alberton, South Africa
            • no-image_en.png

              CAT 992G

              • Manufacturer: Caterpillar
              • Model: 992G
              • Horsepower: 880 hp
              • Operating weight: 94,926.83 kg

              CAT 992G Frame As Front Part number: 109-6835 | Alternate part number/s: 229-8771, 262-4831

              Johannesburg, South Africa
            • no-image_en.png

              CAT 966L

              • Manufacturer: Caterpillar
              • Model: 966L
              • Horsepower: 304 hp
              • Operating weight: 23,220 kg

              Rear Frame Assembly for CAT 966L Wheel Loader Part number: 465-1450

              Johannesburg, South Africa
            • no-image_en.png

              CAT 988H

              • Manufacturer: Caterpillar
              • Model: 988H
              • Horsepower: 405 hp

              Rear Frame Assembly for CAT 988H Wheel Loader Part number: 300-7470

              Johannesburg, South Africa
            12

            Overview

            Construction equipment encompasses a wide range of heavy-duty machines used for various tasks in construction projects. These include earthmoving machines like excavators and bulldozers, lifting equipment like cranes, and road-building machinery like pavers and rollers. This machinery is essential for tasks such as digging, lifting, demolition, and paving.

            FAQ

            What should I consider when buying used construction equipment?

            Check the machine’s age, operating hours, and overall condition. Verify maintenance records and inspect for any wear or damage. It's also wise to consider the availability of spare parts and service support.

            How can I safely transport construction equipment?

            Use a specialized transport service experienced in heavy machinery. Ensure the equipment is properly secured and protected during transit, and comply with all local regulations regarding oversized loads.

            What is the maintenance schedule for construction equipment?

            Regular maintenance includes checking fluids, inspecting hydraulic systems, and ensuring all moving parts are lubricated. Follow the manufacturer’s maintenance guidelines for specific intervals and tasks.