Construction » Texas

Building Filters

36

Used pull type in Texas, USA

  • Trusted Seller
    RITTAL KL 1526 SS ENCLOSURE

    RITTAL KL 1526 SS ENCLOSURE JUNCTION AND PULL BOX T191302

    • Manufacturer: Rittal
    • Machine weight: 3.63 kg

    A Type 4X Enclosure Junction & Pull Box 21C4 Weight: 8 LBS | Dims: 20 x 20 x 10 (in) | Shipping: Calculated at Checkout | Model part number: KL 1526

    $250 USD
    El Paso, TX
  • Trusted Seller
    HUBBELL SC242408NK SCREW COVER PULL

    HUBBELL SC242408NK SCREW COVER PULL BOX T256386

    • Manufacturer: Hubbell Wiegmann
    • Machine weight: 23.59 kg

    24X24X8, W/O KNOCKOUTS, ANSI-61, GRAY POLYESTER POWDER, TYPE 1 ENCLOSURE

    $200 USD
    El Paso, TX
  • Trusted Seller
    Auction
    Carryall LS

    Carryall LS

    • Manufacturer: Carryall

    Carryall LS scraper Serial: S-24710-LS-J Features Bowl capacity: 8 cu.yd. Cable lift Rear push block Hitch: Scraper, Rear Tires Size: 16.00-20 Notes Tires damaged

    Indian Gap, TX 76531, USA
    Visit Auction Website
  • Trusted Seller
    Auction
    Carryall scraper

    Carryall scraper

    • Manufacturer: Carryall

    Carryall scraper Features Bowl capacity: 12 cu.yd. Reversible cutting edge Cable lift Hitch: Scraper, Rear Tires Size: 18.00-25 Notes Tires damaged

    Indian Gap, TX 76531, USA
    Visit Auction Website
  • Trusted Seller
    Auction
    W.E. Grace Mfg. Co. sheepsfoot

    W.E. Grace Mfg. Co. sheepsfoot roller

    • Manufacturer: W.E. Grace Mfg. Co.

    W.E. Grace Mfg. Co. sheepsfoot roller Serial: 1165 Features Drum Drum type: Sheepsfoot Width: 60" Diameter: 60" Drum scrapers Notes Frame weld repairs

    Navasota, TX
    Visit Auction Website
  • Trusted Seller
    HOFFMAN A48H3616SSLP WALLMOUNT HINGED WITH

    HOFFMAN A48H3616SSLP WALLMOUNT HINGED WITH NEMA CLAMPS TYPE 4X 48X36X16 BRUSHED SS 304

    • Manufacturer: Hoffmann
    • Machine weight: 79.38 kg

    Seams continuously welded and ground smooth Seamless foam-in-place gasket Rolled lip around three sides of door Stainless steel door clamp assembly Hasp and staple for padlocking Door removed by pulling stainless...

    $3,000 USD
    El Paso, TX
  • Moldboard 19362

    Moldboard 19362

      Whirlwind Terracer, builder, pull type, no PTO

      $750 USD
      Hillsboro, TX
    • Trusted Seller
      2012 Good Used Caterpillar 170KW

      2012 Good Used Caterpillar 170KW Generator End

      • Manufacturer: Caterpillar
      • Model: SR4
      • Horsepower: 228 hp
      • Power: 395 kW

      Good used Caterpillar SR4 generator end pulled off of a G3406 TA. EMCP II+ control panel included. Arrangement number 193-8731. Permanent magnet generator. 0.75 Pitch. Generator Frame 448. Random wound.

      Houston, TX
    • Trusted Seller
      2012 Good Used Caterpillar 170KW

      2012 Good Used Caterpillar 170KW Generator End

      • Manufacturer: Caterpillar
      • Model: SR4
      • Horsepower: 228 hp
      • Power: 395 kW

      Good used Caterpillar SR4 generator end pulled off of a G3406 TA. EMCP II+ control panel included. Arrangement number 193-8731. Permanent magnet generator. 0.75 Pitch. Generator Frame 448. Random wound.

      Houston, TX
    • Trusted Seller
      2013 Good Used Caterpillar 170KW

      2013 Good Used Caterpillar 170KW Generator End

      • Manufacturer: Caterpillar
      • Model: SR4
      • Horsepower: 228 hp
      • Power: 395 kW

      Good used Caterpillar SR4B generator end pulled off of a G3406 TA. EMCP II+ control panel included. Arrangement number 193-8722. Permanent magnet generator. 0.75 Pitch. Generator Frame 447. Random wound.

      Houston, TX
    • Trusted Seller
      2000 Good Used Cummins NTA-855-G5

      2000 Good Used Cummins NTA-855-G5 400KW Diesel Generator Set

      • Manufacturer: Cummins
      • Model: DFCE
      • Horsepower: 536 hp
      • Power: 400 kW

      Very nice used Cummins 400kW open skid that was pulled from The University of Florida. The unit was well maintained all of its life inside a climate-controlled generator room. Muffler is not included but can be a...

      Houston, TX
    • 2010 Service King 1200 HP

      2010 Service King 1200 HP

      • Manufacturer: Service King
      • Horsepower: 1,200 hp
      • Hook load: 226.8 t

      DRAWWORKS 500,000 lbs Detroit S-60 series 1200 250 ton Top Drive – 500,000 lbs static pull with 26,000 ft lbs of Torque 130 RPM MAST Telescopic Single 500,000 lbs 8 75’ SUBSTRUCTURE 15’H X 12’W X 38’L BOX-TYPE SU...

      Houston, TX
    • Trusted Seller
      2010 Gefco / American Augers

      2010 Gefco / American Augers VR-330 Drill Rig

      • Manufacturer: American Augers

      American Augers Used VR-330 Standard Oil and Gas Drilling Rig 2010 Serial Number VR3300050808 Cat C11 Diesel Engines Safe Working Load Rating: 330,000 lbs (150 Tonnes) 1. Built to API Spec 4F – Specification...

      $450,000 USD

      Get financing

      Est. $8,469/mo

      Houston, TX
    • 2010 American Augers VR-330 Standard

      2010 American Augers VR-330 Standard Oil and Gas Drilling Rig

      • Manufacturer: American Augers

      American Augers VR-330 Standard Oil and Gas Drilling Rig 2010 Serial Number VR3300050808 Cat C11 Diesel Engines Safe Working Load Rating: 330,000 lbs (150 Tonnes) 1. Built to API Spec 4F – Specification for ...

      Winnie, TX
    123

    Overview

    Construction equipment encompasses a wide range of heavy-duty machines used for various tasks in construction projects. These include earthmoving machines like excavators and bulldozers, lifting equipment like cranes, and road-building machinery like pavers and rollers. This machinery is essential for tasks such as digging, lifting, demolition, and paving.

    FAQ

    What should I consider when buying used construction equipment?

    Check the machine’s age, operating hours, and overall condition. Verify maintenance records and inspect for any wear or damage. It's also wise to consider the availability of spare parts and service support.

    How can I safely transport construction equipment?

    Use a specialized transport service experienced in heavy machinery. Ensure the equipment is properly secured and protected during transit, and comply with all local regulations regarding oversized loads.

    What is the maintenance schedule for construction equipment?

    Regular maintenance includes checking fluids, inspecting hydraulic systems, and ensuring all moving parts are lubricated. Follow the manufacturer’s maintenance guidelines for specific intervals and tasks.