Used Bottling, Filling & Packaging in Germany

Tetra Pak Cap Applicator 45

• used

• Manufacturer: Tetra Pak

Used, in very good condition Packaging type: Tetra Prisma Aseptic | Shape of packaging: Squareline | Packaging volume: 1000.00 ml | Voltage: 3N* 400/230 V | Frequency: 50 Hz

1994 Zalkin CA6

• used

• Manufacturer: Zalkin
• Model: CA6

Overview This Solo Screw Capper was manufactured in 1994 by French company Zalkin. The machine was used to apply plastic caps on 75cl cider glass bottles with a capacity of up to 9,000 bottles per hour. It is imm...

bottle washing machine

• used

• Manufacturer: Holstein und Kappert

Additional title: one end machine | Nominal capacity of filler: 50000 b/h | Time through machine: 20 min | Operation / control: Siemens S5 | Base construction: one end machine | Features: 323 baskets of 39 cells...

empty bottle inspector

• used

• Manufacturer: Nagel Automationstechnik

Full empty bottle inspection for 500 ml yoghurt glass bottles. The system uses cameras for base, neck finish and side wall inspection, as well as for thread and side finish inspection, and a high-frequency measur...

1996 Krones Lavatec KES-2-5-312/25-110

• used

• Manufacturer: Krones
• Model: KES

Overview This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, ...

Tetra Pak Cardboard Packer 70

• used

• Manufacturer: Tetra Pak
• Model: TCP70

Characteristics Manufacturing: Tetra Pak | Volume: 500ml, 1000ml | Format: Prisma

Tetra Pak Cap Applicator 21

• used

• Manufacturer: Tetra Pak
• Model: 21

Characteristics Manufacturing: Tetra Pak | Volume: 1000 and 1500 ml | Format: Slim | State: Used, in very good condition

Berning Sleeve Machine type BS0700

• used

Base frame with adjustable feet made of stainless steel (VA) Unwinding device for sleeve rolls with extraction motor Sleeve former and transport with servo motor and control Sleeve cutting device using rotary kni...

bottle rinser

• used

Hot spraying of the empty bottles from below using nozzles on a 3 metre long cleaning section for pre-rinsing and to reach the filling temperature. Overturning of the bottles at the inlet and outlet of the machin...

2010 GM Gera ARCADE GEL 6 RV1-VL 362/110-30

• used

• Manufacturer: GM Gera

Overview This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional an...

Tremark TRM24-F filler

• used

• Manufacturer: Tremark

Low viscosity products filling machine: honey, tomato paste and others

Lot of empty beverage crates FRITZ-KOLA

• used

Krones Sleevematic

• used

• Manufacturer: Krones

KRONES Sleevematic Year of construction: 2008 | Factory number: K795143 | Capacity: 40,000 / h | Nominal voltage: 400/230 V. | Current type: AC 3 / N / PE | Mains frequency: 50 Hz | Full load current ib max: 33 A...

2019 Krones Checkmat 731

• used

• Manufacturer: Krones
• Model: Checkmat

Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Inspection via gamma ray emitter Krones Checkmat with push-off belt

2015 Zalkin T22/731.11

• used

• Manufacturer: Zalkin

Overview The Zalkin screw capper top is made of stainless steel and has 22 capping heads. The running direction is from left to right (clockwise). It comes with an electronic height adjustment. 28 mm aluminum clo...