Used Machine Tools in Saxony, Germany

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 57.0 HSS New ! Diameter: Ø 57.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 423 mm | A-measure: 266 mm | Span length: 230 mm | Dimensions ( packag...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 36,0 HSS New ! preserved !

EURO CIPEL Micro Drill

• Manufacturer: EURO CIPEL S.A.

Micro drills, head drills, drill bits, 35 pieces EURO CIPEL S.A. 0/D3500/L120 /HP01/T526/O /FA 906310/025/ Other quantities on request ! New !

POKOLM shrink feed kit

• Manufacturer: POKOLM

Wet Wipes Packing Machine VPD450 Tool: Ø 6 / 8 / 10 / 12 /16 mm | Usable length: 75 mm | Dimensions ( single shrink fit chuck ): 163 x Ø 64 mm | Dimensions ( packed ): 330 x 210 x 70 mm

METAKON drilling machine

• Manufacturer: METAKON

Valve hole drilling machine METAKON VM-01 Machine was used for drilling valve holes in motorcycle rims. retract, drill, advance with laser pointer ! 380 V Documents available. used, tested ! Video:

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 848 0.5 kW 1240 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

WMW service unit

• Manufacturer: WMW

Service unit, machine control WMW SERVICE UNIT III AUERBACH Fkr SRS 250/1 ( AUERBACHFkrSRS250/1 ) approx. 6 m connection cable picture similar ! used, tested !

PAGUS mechanical clutch

• Manufacturer: Pagus

Mechanical clutch PAGUS Hollow shaft 1: Diameter: Ø 24 mm 1 groove Hollow shaft 2: Diameter: Ø 21 / 25 mm 4 grooves spare part for milling machine FRITZ WERNER FV1 ! used, tested !

PAGUS all-metal damper

• Manufacturer: Pagus

All-metal damper, machine foot set, leveling foot set, vibration isolator, 4 pieces PAGUS Ø 25 x 20 mm Threaded hole: M6 x 1.0 Depth: 10 mm 2x hole: Diameter: Ø 7 / 12 mm ( for hexagon socket screws ) Material: S...

WMW Drill

• Manufacturer: WMW

Twist drill WMW Ø 69 mm x 425 mm HSS used, tested !

ROTO RECORD 4-jaw chuck

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 200 x 4 ( DH200x4 ) centering Ø: 106 / 102 mm, depth: 20 mm ( conical ) used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 - III ( DH200x3-III ) TGL 30-2333 3x threaded hole: M10 x 1.5, depth: 30 mm used, tested !

ROTO RECORD 4-jaw chuck

• Manufacturer: Pagus

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 200 x 4-III ( DH200x4-III ) TGL 30-2333 used, tested !

PAGUS 3-jaw chuck

• Manufacturer: Pagus

3-jaw chuck, 3-jaw chuck, power chuck, wedge hook chuck with adapter PAGUS without jaws ! used, tested !

FORKARDT three-jaw chuck

• Manufacturer: FORKARDT

3-jaw chuck, three-jaw chuck, power chuck FORKARDT 3KTG 200 Bolt circle 1: Ø 150 mm, 6x M10 x 1.5, depth: 22 mm Bolt circle 2: Ø 135 mm, 3x Ø 12.5 / 24 mm, depth: 42 mm without jaws ! used, tested !