Used Machine Tools in Saxony, Germany

PAGUS Luenette

• Manufacturer: Pagus

Luenette, bezel, steady rest, fixed PAGUS used, tested !

PAGUS Luenette

• Manufacturer: Pagus

Luenette, bezel, steady rest, fixed PAGUS used, tested !

ROTER BERG drive unit

• Manufacturer: RED BERG

Drive unit with collet chuck ROTER BERG 940 400 22 315 / 630 rpm Collet chuck: 163E DIN 6343 Motor: KEB ZG0 KPR 71 G 4-2 ( ZG0KPR71G4-2 ) 0.55 / 0.7 kW 315 / 630 rpm 400 V 3AC Hole spacing: 260 / 200 mm, hole dia...

ORSTA pressure generator

• Manufacturer: Orsta

Hydraulic pressure generator, Hydraulic cylinder tester, mobile ORSTA TGL 30-7306 63 - 160 kp/cm² 380 V 3 AC 50 Hz used, tested !

ERNAULT-TOYODA coolant reservoir

• Manufacturer: Ernault Toyoda

Coolant tank with pump ERNAULT-TOYODA 250 liters (e.g. for Ernault-Toyoda HES52) pump 120 l/min 3,5 bar 1.1 kW 220 / 380 V used, tested !

WMW clamping drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I80 M1 Motor: KMR 71 G 4 F 0.75 kW 1380 rpm 220 / 380 V 3AC New, with documents !

PAGUS Bezel

• Manufacturer: Pagus

Bezel, lunette, setting stick, fixed PAGUS used, tested !

AS TECH bolt tensioning device

• Manufacturer: AS TECH

Bolt tensioning device AS TECH HWS Hand lever pump: HDP07001003 9158.22 Hydraulic nut: HWS16111131 9158.22.04 158 kN 700 bar approx. 2.0 m connection hose in metal case used, tested !

RÖHM Bezel

• Manufacturer: Röhm

Bezel, bezel, self-centering bezel RÖHM SLZP-52180 4-645-003-04

Bezel 350mm

Steady rest distance shoulder surface of the guideways: 530 mm used, tested !

PAGUS Luenette

• Manufacturer: Pagus

Bezel, bezel, self-centering bezel PAGUS RMB 5 644 599 used !

SILISTRA chip conveyor

• Manufacturer: Silistra

Chip conveyors, hinged apron conveyors Chip conveyors, hinged belt conveyors SILISTRA TCA 280 x 3221 220 / 380 V 3AC Coolant pump: APOLLO 4 KSEY-25-002 02-008-85-017 Q = 1.6 m³/h H = 63.5 m Motor: MEZ 4AP90L-4 1....

PAGUS clamping plate

• Manufacturer: Pagus

Clamping plate, clamping table, drilling table, machine table, T-slotted plate PAGUS Groove width: 14 / 24 mm, groove depth: 18 mm Side groove: width: 14 mm, depth: 5 mm, 32x M12 x 1.75, depth: 25 mm Bottom groov...

90,6"L x 31,5"W x 67"H (230L x 80W x 170H cm)

• Manufacturer: WMW

Machine vice WMW on table with graduation 360° rotatable used, tested !

GARANT shrink lining set

• Manufacturer: Garant

Shrink fit chuck set, shrink fit chuck GARANT 302325 SK 40 used !