Used Materials Testing in Germany

RETSCH EM 2200 T
- used
- Manufacturer: Retsch
Hotplate, adjustable temperature and stirring frequency, 230 V, 1850 rpm, 630 W
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPDU
- used
- Manufacturer: Georg Fischer
- Model: SPDU
for determining the gas permeability, measuring ranges 0 to 50 or 0 to 500 Gd
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPDU
- used
- Manufacturer: Georg Fischer
- Model: SPDU
for determining the gas permeability, measuring ranges 0 to 50 or 0 to 500 Gd
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPIT
- used
- Manufacturer: Georg Fischer
Connected loads 220 V, 50/60 Hz, 250 W, timer 15 min.
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPIT
- used
- Manufacturer: Georg Fischer
Connected loads 220 V, 50/60 Hz, 250 W, timer 15 min.
Meinerzhagen, Germany
+GF+ - GEORG FISCHER PCR
- used
- Manufacturer: Georg Fischer
Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPCR
- used
- Manufacturer: Georg Fischer
Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPRA
- used
- Manufacturer: Georg Fischer
- Model: SPRA
Test specimen cylinder bushing, ram base, ejector, reading scale
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPRA
- used
- Manufacturer: Georg Fischer
- Model: SPRA
Test specimen cylinder bushing, ram base, ejector, reading scale
Meinerzhagen, Germany
+GF+ - GEORG FISCHER PRP
- used
- Manufacturer: Georg Fischer
Standard test cylinder production by vibratory pressing, pressing pressure 1 kp/cm²
Meinerzhagen, Germany
BNIF plates
- used
Product information "BNIF plates" Comparison plates for testing surface roughness in accordance with EN 1370 The 25 plates, each measuring 110 x 160 mm, are supplied in a case
$1,257 USD
Münster, Germany
SILVER YOKE TYPE 1
- used
Product information "SILVER YOKE TYPE 1" Silver Yoke Type 1 hand magnet Switchable alternating field / direct field hand magnet Single coil version, transparent housing 230 volt version
$1,158 USD
Münster, Germany
Scrata plates - 48 pieces -
- used
Product information "Scrata plates - 48 pieces -" Comparison plates for testing surface quality in accordance with DIN EN 1370 The set is composed as follows:- Surface roughness (1-5) - Surface inclusions (1-5) -...
$3,654 USD
Münster, Germany
portable hardness tester novotest T-UD3
- used
Product information "portable hardness tester novotest T-UD3" portable hardness tester novotest T-UD3 with one probe (either UCI or Leeb) 1kgf (9.8N),, 5kgf (49N), 10kgf (98N) Leeb probe types D, DC, DL, C, D+15,...
$3,391 USD
Münster, Germany
Slip cross magnet 42 volts
- used
Product information "Helling cross magnet 42 Volt" Helling cross magnet on rollers completely overhauled // - newly potted - ideal testing device for simultaneous longitudinal and transverse fault testing! requir...
$1,163 USD
Münster, Germany