Used Materials Testing in Flanders, Belgium

ZFG-3.1 GPSKIT1015 Light weight deflectometer+ printer+ case + MS

ZFG-3.1 GPS KIT 10 15 Light weight deflectometer Composed out of - ZFG-3.1 GPS 10 kg - ZFG weight 15 kg - Webapp - Printer in Case - Magnetic Stand - Transport Case for all on wheels

ZFG-3.1 Light weight deflectometer ZFG-3.0 70MN/m°

• Manufacturer: ZORN

Light Weight Deflectometer ZORN ZFG 3.1 (10-300) according to TP BF-StB Part B 8.3 & 8.4, ASTM E-2835 ? Integrated GPS/ GNSS receiver for determination of measurement position (can be deacvtivated) ? Integrated W...

A081-01 : Lightweight aggregates crushing resistance

Lightweight aggregates crushing resistance Standard : EN 13055-1 METHOD 1 Apparatus for the determination of the crushing resistance of lightweight aggregates having diameter from 4 to 22 mm, and a volumic mass o...

B024 : Permeameter

Permeameter Mainly used in situ to perform and to check the permeability and drainage on road carpets, concrete pavements, tamped earth etc. The test consists in filling the cylinder with water, after ermetically...

Calibration Proctor Mould Small diam 100

• Manufacturer: Proctor

Calibration of a Proctor Mould: diameter and height The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. European Lab Services is accredited accordi...

Calibration Pull off Tester

Calibration for a Pull off tester with one channel under ISO17025 accreditation 327-CAL The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. Europea...

Justification Automatic Pull off Tester

Rectification of an automatic Pull off tester DY-2 following ISO7500-1 (wièout annex C) èe tester will be ready for a calibration under ISO7500-1 after èie rectification (calibration not included)

Calibration Ductilometer three lc

Calibration Ductilometer Apparatus with three load cells

Calibration Blaine Apparatus: k-factor EN196-6

Calibration Blaine Apparatus k-factor following EN 196-6

E017 Fineness of fly ash by wet sieving

Fineness of fly ash by wet sieving

C199 Unit weight measure 10 Litres, EN 12350-6, EN 1097-3

Unit weight measure 10 Litres, EN 12350-6, EN 1097-3

C194 Concrete pocket penetrometer

Concrete pocket penetrometer

A108 : Crushing coefficient machine

Crushing coefficient machine Standard : CNR N. 4 Composed of a metallic guide 500 mm long and 140 mm wide, suitable to contain 500 g of testing aggregates. The guide is slided lengthwise and transversalwise throu...

Calibration Micro Deval

Calibration Micro Deval The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. European Lab Services is accredited according to the ISO/IEC 17025 stan...

E025 Bulk density of cement

Bulk density of cement This apparatus is used for the measurement of the apparent density (bulk density) of powders and non-cohesive materials. It consists of sieve funnel with tripod, unit weight measure 1 litre...