Used Materials Testing in Flanders, Belgium

LABORATORY VANE APPARATUS

• Manufacturer: Matest

Matest Laboratory Vane apparatus represents a valid alternative to the most common standard triaxial equipment whenever a rapid estimation of the undrained shear strength of a soil specimen is required. Based on ...

S057 Field vane tester

Used to determine the shear strength of undrained (CU) cohesive soft soils, to firm non-fissured soils on site. The instrument consists of a T-handle cylindrical body where a torsional spring is housed, and three...

E142ME Pull-off tester Defelsko ATM50

• Manufacturer: Defelsko

E142ME Pull-off tester Defelsko ATM50 Adhesion testers include everything needed for testing: Automatic Adhesion Tester, built-in rechargeable NiMH battery with charger, dollies, abrasive pad, cutting tool, glue...

C056N PRESS 2000KN MOTORIZED, SERVO PLUS

Compression testing machine 2000 kN capacity motorized with Servo-Plus evolution control unit (fully automatic model), to test cylinders up to dia.160x320 mm and cubes up to 150 mm side On the picture with severa...

C381 : Rock classification hammer

Test hammer impact energy 0,735 Joule Standards : ASTM D5873, ISRM EN 12504 PART 2, ASTM C805, DIN 1048, BS 1881:202, NF P18-417 This impact hammer is used for rock classification test. The core rock specimen nor...

S248 : Permeameter stand 4 cells

Permeameter stand 4 cells This 4 cells capacity stand is designed to perform both constant head and falling head permeability tests on compacted granular soil samples. The stand consists of a metal frame with wat...

extension aluminium dia50, 150 mm for ANIX

Extension aluminium Ø50, 150mm, for plate load test

extension aluminium dia50, 100 mm for ANIX

Extension aluminium Ø50, 100mm, for plate load test

BLAINE AIR PERMEABILITY APPARATUS, ELECTRONIC, Semi-automati

Electronic Blaine air permeability apparatus with semi-automatic test-cycle, electric suction pump, time registration and measuring section with photoelectric barrier. After the test, automatic display of the tim...

RCON2™ - Full Package-115/230V

• Manufacturer: Giatec

RCON2™ unit, Power adapter, Test cable set, Alligator test clip, Sample holder, Verification kit, Fresh concrete probe, User manual, Communication PC software, USB cable, 2 bottles of conductive gels, 2 pairs of ...

C390 Anvil for verification

• Manufacturer: Matest

Anvil for verification comform EN 12504-2 Used for the verification the calibration of the concrete test hammers. Special steel alloy made. Dimensions: dia. 150 by 320 mm. Weight: 16 kg

S246-01 : Falling head permeameter

Falling head permeameter Standard : CEN ISO/TS 17892-11 Used to determine the permeability of fine-grained soils such as clay-like or silty soils. The specimen is confined within the permeameter which is connecte...

A121 Rock cradle to ASTM D5873

• Manufacturer: Matest

Rock cradle to use with C381 rebound hammer Standard: ASTM D5873 It is the equippement used to locate EX or NX core rock specimens during the classification test by the Rock Hammer model C381. Weight: 20 Kg

ZORN MINI 3.1 Leichtes Fallgewichtsgerät 120 mm width

• Manufacturer: ZORN

ZORN MINI - 3.1 Light Weight Deflectometer Very light version (less than 10 kg total), easy to take with one person in any car. For determining the dynamic deformation modulus Evd in narrow trenches from 120 mm w...

A122 : Barton combs (profilometers)

• Manufacturer: Lang

Barton combs (profilometers) Used for the evaluation of the surface roughness of rock samples. These simple devices allows very thin steel wires to perfectly lay to the outline of the sample under test, in order ...