Used processing in Emilia-Romagna, Italy

COSMAC 2 Teste / 2 Heads

• Manufacturer: Cosmac

Linear cutting machine with belt and hot galvanized structure in stainless steel. It\'s equipped with two cutting heads with supported shafts; the diamond disks for the cutting are assembled on chromium plated gr...

COSMAC SM7-7T

• Manufacturer: Cosmac

Profiling machine with 7 heads for shaping and polishing porcelain stoneware and double-firing skirting tiles. The 1st and 2st head raking by 30°-60° and with a bucket diamond-ribbed grinder of D.150 is for the...

COSMAC SM10-10T

• Manufacturer: Cosmac

Profiling machine with 10 heads for shaping and polishing porcelain stoneware and double-firing skirting tiles. The 1st and 2st head raking by 30°-60° and with a bucket diamond-ribbed grinder of D.150 is for th...

COSMAC SM7-5T

• Manufacturer: Cosmac

Profiling and binding 5-head machine for shaping and polishing glazed stoneware baseboard, single and double firing etc. The 1st head is used at 45° to roughly hew the piece at the top; the 2nd head for shamping...

COSMAC RMC25

• Manufacturer: Cosmac

This system allows you to dose, mix, and apply 2-COMPONENT resins using a manual dispensing gun.

COSMAC ALIMENTATORE AUTOMATICO

• Manufacturer: Cosmac

COSMAC MT 600 3T

• Manufacturer: Cosmac

MT 600 3T Power: 3 X 11KW

COSMAC OMEGA 45 2T

• Manufacturer: Cosmac

COSMAC PRAGMA 50 1T

• Manufacturer: Cosmac

COSMAC FRESA A PONTE PER TAGLI VERTICALI E A 45° Formato massimo 1500x 3000mm

• Manufacturer: Cosmac

COSMAC TMJ90

• Manufacturer: Cosmac

This semiautomatic machine is designed to make a 45 degree cut on pieces having a width surface of 600mm. Thanks to its retractable roller conveyor, which is ideal for supporting material during the processing an...

COSMAC MTDJ4T

• Manufacturer: Cosmac

The MTDJ4T machine is used to make a 45 degree cut on both sides of skirting tiles. This machine works in the same way as the other machines, but it gives you the possibility to make a 45 degree cut on both the r...

COSMAC MB2T

• Manufacturer: Cosmac

The machine MB2T is used to chamfer costa retta steps on both the lower and upper sides where corners may be sharp or not perfect. The machine has an upper head and a lower one with the ability to perform a bevel...

COSMAC MB4T

• Manufacturer: Cosmac

The MB4T machine is used to chamfer costa retta steps on both the lower and upper sides where corners may be sharp or not perfect. The two upper and lower heads of the machine allow for the execution of a more or...

COSMAC GIGAJOLLY

• Manufacturer: Cosmac

The semiautomatic GIGAJOLLY machine is designed to make a 45 degree cut on big surfaces. Its working platform is fixed and thanks to its dimensions it is possible to cut pieces having a width surface of 1200mm-32...