Used Cosmac in Emilia-Romagna, Italy

COSMAC MT4TS

• Manufacturer: Cosmac

Cutting machine for big sizes, with shipping tape available in various sizes. The machine can support 4 to 6 cutting heads, each of which has a power of 4kW. On the machine, as an option, you may require the auto...

COSMAC MB2T

• Manufacturer: Cosmac

The machine MB2T is used to chamfer costa retta steps on both the lower and upper sides where corners may be sharp or not perfect. The machine has an upper head and a lower one with the ability to perform a bevel...

COSMAC MB4T

• Manufacturer: Cosmac

The MB4T machine is used to chamfer costa retta steps on both the lower and upper sides where corners may be sharp or not perfect. The two upper and lower heads of the machine allow for the execution of a more or...

COSMAC MTDJ4T

• Manufacturer: Cosmac

The MTDJ4T machine is used to make a 45 degree cut on both sides of skirting tiles. This machine works in the same way as the other machines, but it gives you the possibility to make a 45 degree cut on both the r...

COSMAC dry cut

• Manufacturer: Cosmac

COSMAC MT400

• Manufacturer: Cosmac

Linear cutting machine with belt and hot galvanized structure in stainless steel. It\'s equipped with two cutting heads with supported shafts; the diamond disks for the cutting are assembled on chromium plated gr...

COSMAC SG90

• Manufacturer: Cosmac
• Horsepower: 11 hp
• Power: 8 kW

GLUE-SPREADING MACHINE MOD. SG90 Glue-spreading machine suitable to glue, with vinyl glue, marble, ceramics and glass in various shapes and sizes previously arranged on panels dedicated to the most varied require...

COSMAC MIG1200

• Manufacturer: Cosmac

In order to glue the COSTA RETTA steps or the "V-CAP" elements obtained from the 45 degree-cut skirting tiles, it is necessary to use this accessory which reduces the processing time to the minimum and gives you ...

COSMAC TMFG 90

• Manufacturer: Cosmac

The new model of manual cutting machine TMFG 90, with the motor housed in the back part of the machine, allows the user to cut big sizes with no length limitation. This option is a big advantage since the market ...

COSMAC MT702 1T

• Manufacturer: Cosmac

Machine engraving on raw dry. The machine is equipped with various ports for the intake of dust created by the discs.

COSMAC SM7-7T

• Manufacturer: Cosmac

Profiling machine with 7 heads for shaping and polishing porcelain stoneware and double-firing skirting tiles. The 1st and 2st head raking by 30°-60° and with a bucket diamond-ribbed grinder of D.150 is for the...

COSMAC 1 Testa / 1 Head

• Manufacturer: Cosmac

Linear cutting machine with belt and hot galvanized structure in stainless steel. It\'s equipped with one cutting head with supported shaft; the diamond disks for the cutting are assembled on chromium plated grin...

COSMAC LINEA DI TAGLIO MOSAICO

• Manufacturer: Cosmac

The automatic cutting line for mosaic has always been our strength, together with reliability and exactness of our cutting and material handling machines. The line is made up of: an ALV belt for the automatic fee...

COSMAC S16 1700

• Manufacturer: Cosmac

Linear belt cutting machine with hot galvanized and stainless steel structure, with three cutting heads with supported shafts; the diamond cutting discs are mounted on chromium-plated and retified shafts allowing...

COSMAC MT6TS

• Manufacturer: Cosmac

Cutting machine for big sizes, with shipping tape available in various sizes. The machine has 6 cutting heads, each of which has a power of 4kW. On the machine, as an option, you may require the automatic positio...