- Trusted Seller
300 GALLON APV CREPACO PROCESSOR - S/S - 75 PSI JACKET
- Manufacturer: Crepaco
1 - used 300 gallon APV Crepaco, stainless steel, steam jacketed, processor kettle with a dome top and a conical bottom on three adjustable legs. The 3 zone jacket is rated for 75 psi@ 350F. Kettle is 48" inside ...
USA - Trusted Seller
Votator 1.39 m² (15 ft²) Stainless Steel 304 - IPP# 19620
- Manufacturer: Votator
3 tube wiped surface heat exchanger Unit has (1) heating exchanger and (2) cooling exchangers. Heating tube, Nominal 5 Square foot surface area, a CS jacket, Nickel 200 inner tube, 6 5/8" ID x 38" long, National ...
Princeton Junction, NJ - Trusted Seller
Used 300 Gallon Jacketed Tank (Reactor), 316 Stainless Steel, With Scrape Agitation
- Manufacturer: Crepaco
-serial no. d0169 -national board no. 5514 -jacket rated 150 psi @ 350 deg.f. -vessel rated 25 psi @ 350 deg.f -two zone jacket -with counter current scrape agitation -with 40 hp hydraulic pack -motor: 40 ...
Saint-Jérôme, Canada 
EVAPORATORS 70307
- Manufacturer: Crepaco
SCRAPPED SURFACE HEAT EXCHANGER; W/2 HP DRIVE; 1425 RPM; 208/416 VOLTS;
Cleveland, TX
EVAPORATORS 70308
- Manufacturer: Crepaco
SCRAPPED SURFACE HEAT EXCHANGER; W/2 HP DRIVE; 1725 RPM; 575 VOLTS;
Cleveland, TX
COLUMNS 100704
- Manufacturer: Crepaco
TOP MFG. BY APV CREPACO IN 1989; BOTTOM MFG. BY PRECISION STAINLESS IN 1989; 23'0" PACKED BED (220 CU. FT. OF 316SS 2" PALL RINGS); LUG RING SUPPORTS; 1/4" WALL THICKNESS; COLUMN IS FLANGD BETWEEN TOP AND BOTTOM
Cleveland, TX- Trusted Seller
125 gallon Crepaco stainless steel holding tank
- Manufacturer: Crepaco
125 gallon Crepaco stainless steel holding tank, 48" diameter x 16" vertical straight wall, dome top, disch bottom, (3) overhead supports with hanger for an overhead hoist support, with top manhole, vent, several...
Lodi, CA - Trusted Seller
- Trusted Seller
Colorado, USA - Trusted Seller
1,500 GALLON APV CREAPACO CONE BOTTOM PROCESSOR – S/S (NO AGITATION) #9219
- Manufacturer: Crepaco
1 – used approx. 1,500 gallon Dome Top Cone Bottom Pressure Wall Processor manufactured by APV Crepaco. Approx. 88 in. dia. x 124 in. overall height. Rectangular manway. Not designed for sanitary use. This unit i...
USA 
APV Crepaco Stainless Steel Heat Exchanger HE2071
- Manufacturer: Crepaco
Material: Stainless Steel | Oad: 76"L x 22"W x 57"H | Weight: 2880 | Capacity: 0 | Outlet: 3.25" | Plate-size: 17 x 45 | Approx square foot: 542.5 | Inlet: 3.25"
- Trusted Seller
Tank, 500 Gallon, Stainless Steel, Jacket, Agitated, Crepaco #5991236
- Manufacturer: Crepaco
Stainless Steel 500-gallon jacketed and agitated tank, manufactured by Crepaco. Tank has a jacket rated for 75 PSI at 400°F. Dimensions are 48" diameter x 58" straight side with dish bottom to 2” diameter center ...
San Dimas, CA - Trusted Seller
Homogenizer, Crepaco, Mdl 3DD2, 7.5 HP, 3-Piston #S744419
- Manufacturer: Crepaco
Creamery Package Stainless Steel 3-Piston Homogenizer, Model 3DD2. Includes (3) 2-1/4" diameter plungers, 1-1/2" diameter inlet & outlet. Driven by 7-1/2 HP, 220/440 V, 3-phase, 60 Hz, 1750 RPM motor, pulley rati...
San Dimas, CA - Trusted Seller
Tank, 3,000 Gallon, APV Crepaco, Jacketed, Vertical, Agitated, Stainless Steel, #5991448
- Manufacturer: Crepaco
Used 3,000-gallon stainless steel vertical mix tank / silo, manufactured by APV Crepaco. Features include foam insulation with white-painted exterior, dimple jacket rated for 125 PSI, top-entering agitator with v...
Chowchilla, CA - Trusted Seller
Tank, 200 Gallon, APV Crepaco, Liquifier, Single Wall, Stainless Steel, #5991452
- Manufacturer: Crepaco
APV Crepaco Stainless Steel 200-gallon capacity Liquifier Tank, single-wall with a rectangular tank body and top hinged access lid. Features an under-mounted gear drive system for with internal emulsifier blade. ...
Chowchilla, CA
Tip: Enter manufacturer, model or keyword