Used Crown Machine Tools

Crown Desktop Membrane Switch Connector Crimping Machine
- Manufacturer: Crown
Application: Membrane Switch Crimping | Nominal pressure: 36.5KG | Average power consumption: 450W | Motor power: 550W | Stroke: 30mm(40mm is customizable) | Power supply: 220V/50Hz,110V/60Hz | Net weight: 38KG ...
Suzhou, China
Crown Auto Toroidal Transformer Coil Winder Machine
- Manufacturer: Crown
Stable pulling force, small inner diameter, fast winding speed, no damage to the wire It is suitable for winding products with small diameter and many turns, such as primary and secondary windings of small ...
Suzhou, China
Crown Car Seat Belt Webbing Cutting Machine
- Manufacturer: Crown
Simple operation, automatic cutting High speed: up to 120pcs/min. (L=50mm) High precision: every cut is monitored by stepper motor to ensure high accuracy Flat cutting surface: the blade is made...
Suzhou, China
Crown Ultrasonic Elastic Band Fabric Cutting Machine
- Manufacturer: Crown
Air pressure: 3-6 KG/cm2 | Voltage: 220V | Efficiency: 20-60pcs/min | Ultrasonic frequency: 18KHZ | Rated power: 1.8KW | Weight: 175KG | Dimensions: 2500*880*1100 (L*W*H)mm
Suzhou, China
Crown Fully Automatic Nylon Rope Cutting Machine
- Manufacturer: Crown
Frequency rate: 18KHZ | Voltage: 220V | Output power: 2.6KW | Dimensions: 2000*530*1200MM | Weight: 180KG | Efficiency: 80-120 times/min.
Suzhou, China
Crown Two Knives Ultrasonic Woven Belt Cutting Machine
- Manufacturer: Crown
Voltage/ frequency: 220V / 50HZ | Power: 2200W | Cutting length: 1-99999mm | Cutting width: 3-80mm | Cutting thickness: 0.2-3mm | Air press: 0.6-0.8Mps | Cutting type: Ultrasonic cutting | Dimension: 980Lx800Wx1...
Suzhou, China
Crown Paper Tape OPP Tape Strapping Machine
- Manufacturer: Crown
Hot melt glueless bonding, automatic bonding, free from manual knotting, high efficiency Can be used to pack wires, cables, vegetables, food, cosmetics, electronic products, medicines, etc. Compact bo...
Suzhou, China
Crown Membrane Switch Connector Pins Crimping Machine
- Manufacturer: Crown
Function: Membrane switch single end crimping | Power supply: AC220V, 50/60Hz | Power: 750W | Standard p number: 2P-20P | Crimp force: 2.0T | Dimensions: 600*400*650mm | Weight: 65KG
Suzhou, China
Crown Hot and Cold Webbing Tape Cutting Machine
- Manufacturer: Crown
High speed: 150-200p/min High accuracy: stepper motor guarantees high accuracy The cutting surface is flat: the hot knife can heat seal the cutting surface of the webbing tape, and the sealing is smoo...
Suzhou, China
Crown Wire Cutting Stripping Coiling and Bundling Machine
- Manufacturer: Crown
Function: automatic meter counting + wire cutting + stripping + 8 shape coil winding + one cable tie bundling Suitable for small and big cables, such as USB cables, DC cables, power cables Speed: up t...
Suzhou, China
Crown Five-station Shielded Wire Processing All-in-one Machine
- Manufacturer: Crown
Cutting range: 3-70mm² | Stripping length: 5-60mm | Braid cutting length: 5-55mm | Turn-over braid length: 5-20mm | Shielding mesh cutting range: 5-100mm (other lengths can be customized) | Power supply: AC380V ...
Suzhou, China
Crown EV Charging Pile Cable Cutting Machine
- Manufacturer: Crown
Processing range: 10-70mm² | Cutting range: 500-10000mm | Power supply: AC380V 3P+N+PE 50/60Hz | Air source: 0.6-0.8mpa | Dimensions: calculated according to the layout requirements of the actual production line
Suzhou, China
Crown Wire Cutting Stripping and Bending Machine
- Manufacturer: Crown
This is a high performance wire cutting stripping and bending machine for processing a wide range of wires and cables; It can not only strip both ends of the wire, but also bend the wire into your requeste...
Suzhou, China
Crown Automatic Wire Tinning and Terminal Crimping Machine
- Manufacturer: Crown
The crimping parts adopt ultra-quiet terminal machine, low noise and uniform force, and can be equipped with horizontal and vertical molds Fast wire feeding, cutting, stripping, terminal crimping, twisting,...
Suzhou, China
Crown High-speed Corrugated Pipe Cutting Machine
- Manufacturer: Crown
Display mode: 7-inch man-machine interface | Processing range: φ4 - 32mm | Cutting length: 1mm-999999.99mm | Cutting tolerance: within 0.003*L (L=cutting length) | Maximum diameter allowed to pass: Φ35 | Feeding...
Suzhou, China