Used process

12" Single Screw Crown/CDL Dump Extruder, Model RPU2E400, 10:1 L/D Ratio

• Manufacturer: Crown

30" L x 12" W Water Cooled Feed Throat With Pneumatic Ram Stuffer Water Cooled Screw, 4 Downstream Zones, Non-Vented Closed Loop System With Pump, Tank, And Heat Exchanger Approximate 48" Centerline Height 500 V...

Cow-Size Crown-Style Aluminum Weaner in Blister Pack

Crown Aluminum Cow Weaner features simple construction and a practical design. It is rust and corrosion proof, light, strong and effective. Boxed

2004 Crown Iron Works .

• Manufacturer: Crown

Unused Crown Iron Works 9498 sqft (882 sqmt) 304 ss horizontal evaporator condenser. Has (2016) 3/4 inch (19.05 mm) diameter x 24 ft (7315 mm) long 304 stainless steel tubes rated 55 psi (3.70 bar) design pressur...

12" Single Screw Crown/CDL Dump Extruder, Model RPU2E400, 10:1 L/D Ratio

• Manufacturer: Crown

30" L x 12" W Water Cooled Feed Throat With Pneumatic Ram Stuffer Water Cooled Screw, 4 Downstream Zones, Non-Vented Closed Loop System With Pump, Tank, And Heat Exchanger Approximate 48" Centerline Height 500 V...

2004 Crown Iron Works .

• Manufacturer: Crown

Crown Iron Works condenser, NEW, Old Stock. Surface area 5088 sq ft (473 sq m) with (1080) 3/4 inch (19.05 mm) diameter x 24 ft (7315 mm) long ss304 stainless steel tubes rated 45 psi (3.1 bar) design pressure. C...

50 gallon Crown stainless steel steam jacketed kettle

• Manufacturer: Crown

50 gallon Crown stainless steel steam jacketed kettle, model number DL-40, serial number 10424-12B-542, National Board number 719, 26" diameter x 23" deep, 55 PSI at 302 degrees Fahrenheit maximum working pressur...

ROYAL TRIUMPH ROYAL TRIUMPH STAINLESS STEEL CROWN MILL

• Manufacturer: ROYAL TRIUMPH

Crown mill manufactured by ROYAL TRIUMPH in stainless steel.

RIMSA RIMSA-3 315 CROWN MILL

• Manufacturer: RIMSA

RIMSA-3 crown mill made of stainless steel Mounted on a stainless steel structure equipped with: Loading hopper with auger for dosing Sleeve filter to collect dust Discharge hopper with butterfly valve 10 hp moto...

2014 IRON CROWN MILL 18.5 kW

• Manufacturer: Produttore sconosciuto

Crown mill made of iron equipped with control panel and converter The auger has a frequency converter With documentation

Crown Iron Works 48

• Manufacturer: Crown

Used Crown Iron Works, Model 48, Milling Flash Drying System. Major components include: 48"dia Ring Flash Dryer (MFD-105) manufactured by Crown Iron Works, 30000 SCFH @30psig gas train, Forced Draft Blower (F-102...

CROWN MACHINERY R-LTDA adhesive coating line

• Manufacturer: Crown

was built in 2012 in Taiwan by Crown Machinery Co., Ltd. (Crowntex). The machine, designed to coat different types of surfaces with adhesive, is an excellent choice for the serial production of, among others, adh...