Processing » Homogenizers » Australia

Building Filters

19

Used processing in Australia

Trusted Seller
Fryma Processing Vessel
- Manufacturer: Fryma
- Model: VME-500
Processing Vessel, “FRYMA” model VME500, 300L min capacity and 750L max capacity, size: 1000mm dia x 1000mm deep, Steam Jacket with DT: 140 degrees and DP:250kpa, internal Vessel is Vacuum rated, dished bottom wi...
Sydney, Australia
Trusted Seller
Fryma Vacuum Processing Vessel
- Manufacturer: Fryma
- Model: VME-12
Vacuum Processing Vessel, “Fryma”, Model VME-12, 21L gross capacity with 4 to 14L working capacity, bowl size 300mm dia x 300mm deep, steam jacketed with scraper, premixing with cavitation disc at max speed 2770r...
Sydney, Australia
Trusted Seller
Armfield Universal Process Tank with Silverson Emulsifier
- Manufacturer: Silverson
Universal Process Tank, “Armfield” Model FT40, capacity 20L, with Silverson L4R Emulsifier stainless steel wetted part, mixing, emulsification, pasteurization, incubation, fully self-contained system in mobile ca...
Sydney, Australia
FRYMA MZ110
- Manufacturer: Fryma
- Model: MZ
Fryma Model MZ110 toothed colloid mill. The FRYMA MZ110 is an inline toothed colloid mill suitable for slurries, that grinds solids and homogenizes the slurry. The required fineness can be adjusted by means of ad...
Melbourne, Australia
Trusted Seller
Inline Emulsifier
Inline Emulsifier, with a 70mm dia inlet x 50mm dia outlet, driven by 4kw 2850rpm, mounted over stainless steel base Follow us on: © 2024 Fallsdell Machinery Pty Ltd
Sydney, Australia
Trusted Seller
APV Laboratory Two Stage Homogenizer
- Manufacturer: APV - Gaulin
- Model: 15MR-8TA
Laboratory Homogenizer, “APV Gaulin” model 15MR-8TA, all stainless steel wetted parts, max. pressure 8000psi, driven by 3 phase 3hp 1470rpm motor, trolley is not included Follow us on: © 2024 Fallsdell Machinery ...
Sydney, Australia
Trusted Seller
Urschel Comitrol Processor
- Manufacturer: Urschel
- Model: 3600
Comitrol Processor, “Urschel” model 3600, 3 phase 7.5kw, with feed pump, mounted on mobile Frame, complete with a spare cutting head Follow us on: © 2024 Fallsdell Machinery Pty Ltd
Sydney, Australia
Trusted Seller
Inline Emulsifier
Inline Emulsifier, 38mm dia inlet x outlet, driven by 3 phase 0.75kw 2780rpm motor, all stainless steel wetted parts, 80mm dia impeller & dia 90mm screen, with stainless steel foundation base Follow us on: © 2024...
Sydney, Australia
Trusted Seller
Urschel Comitrol Processor
- Manufacturer: Urschel
- Model: 3600
Comitrol Processor, “Urschel” model 3600, 3 phase 7.5kw, with feed pump, mounted on mobile Frame, complete with a spare cutting head Follow us on: © 2024 Fallsdell Machinery Pty Ltd
Sydney, Australia
Trusted Seller
Fallsdell Inline Emulsifier
- Manufacturer: Fallsdell
Inline Emulsifier, “Fallsdell” model RC40, 50mm dia inlet x outlet connection, driven by 3 phase 4kw electric motor Follow us on: © 2024 Fallsdell Machinery Pty Ltd
Sydney, Australia
Advanced Dispersers Colloid Mills
- Manufacturer: Advanced Dispersers
Colloid Mill, Advanced Dispersers, In/Out:50mm Dia. Unit is a flameproof stainless steel inline 2 stage colloid mill, tooth type. Unit driven by a 15kw@2915RPM, 415Volt, EXD flameproof motor.
Sydney, Australia
APV Products 25M 3BA
- Manufacturer: APV Products
APV Gaulin Homogeniser Model 25M3BA Will process up to 113 Litre/hr at 8000psi, 2 stage. 2Hp 415V drive motor. Ex Food Industry
Melbourne, Australia
APV Products HP/Industry 16.51H
- Manufacturer: APV Products
YOM: 1993 Was last used for Photographic Emulsion Capacity: 300-400 L/Hr Inlet Pressure: 3-10 Bar (low speed viscosity-high speed viscosity) Max Pump Pressure: 800 bar Cooling Water Volume: Eccentric Oil 90 l/hr ...
Melbourne, Australia
APV Products 58.72
- Manufacturer: APV Products
APV Rannie Homogeniser Model 58. 72. Drive 55kw 3 phase motor and soft starter. Approx Capacity 2000L/hr at 6000psi or 5000L/hr at 3500psi. Includes Belt guard, covers and spare seals.
Melbourne, Australia
Sanmaru HC 3-1
- Manufacturer: Sanmaru
Homogeniser Made in Japan SANMARU. Model HC -3-1, single stage 2700L/hr 3000psi. 18.5kw motor 415V.
Melbourne, Australia

12