Used Extruders in Illinois, USA

3.5″ TWO STAGE EXTRUDER SCREW 12025

Two stage 3.5″ chrome plated extruder screw, approximately 24:1 L/D, dual mixing section and dual key shaft, unknown manufacturer.

4.5″ TWO STAGE EXTRUDER SCREW 12023

Two stage 4.5″ extruder screw with chrome plated mixing pins at the end of first stage. Approximately 28:1 L/D, single key shaft.

6″ WELEX EXTRUDER SCREW 12350

• Manufacturer: Welex

6″ Welex extruder screw, S/N 144812, 32:1 L/D, 2 stage 216″ overall length. 9″ long x 1.5″ wide keyway.

CINCINNATI EXTRUSION 45MM EXTRUDER 18639

• Manufacturer: Cincinnati

Used Cincinnati Extrusion model Alpha 45-28G 45mm (1.77″) single screw extruder. S/N U2203. 28:1 L/D five (5) zone electrically heated, air cooled, and non-vented barrel at a 42″ centerline height. Hersteller Wat...

DAVIS STANDARD 165MM60TPIH 6.5″ EXTRUDER 10869

• Manufacturer: Davis-Standard

Davis Standard model 165MM60TPIH, S/N X7206 27:1 L/D 150HP DC motor 100RPM screw speed 526HP rated gearbox with a 1.5 service factor. No feed throat, no control panel. Water cooled barrel. Last used as a secondar...

DAVIS STANDARD 2.5″ EXTRUDER BARREL 7778

• Manufacturer: Davis-Standard

Davis Standard 2.5″ extruder barrel screw. 24:1 L/D.Three are available.

BRABENDER 25mm TWIN SCREW EXTRUDER 16813

• Manufacturer: Brabender

Brabender model 088 twin screw extruder, air cooled. Includes DC motor and temperature control panel.

DAVIS STANDARD SINGLE STAGE EXTRUDER 12020

• Manufacturer: Davis-Standard

4.5″ Davis Standard single stage extruder screw. Approximately 28:1 L/D with mixing pins at screw end.

CINCINNATI 80mm TWIN SCREW EXTRUDER 18511

• Manufacturer: Cincinnati

Used Cincinnati model CMT80L-APC 80mm conical counter rotating twin screw plastic extruder. S/N 2040985/010. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adapter plate that reduce...

BATTENFELD CM55 TWIN SCREW EXTRUDER 18510

• Manufacturer: Battenfeld

Used Battenfeld-Cincinnati model CM55 counter rotating twin screw extruder. S/N 2804784/010. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with .20 kw motors. ...

LEISTRITZ 27MM TWIN SCREW EXTRUDER 18970

• Manufacturer: Leistritz

Used Leistritz Twin Screw Extruder, Type MIC 27-GL-36D. (2) 1.05″ (27 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8 barrel housing section electrically heated, water cooled. (1) Degassing port. Maximum scre...

CINCINNATI 112mm TWIN SCREW EXTRUDER 18512

• Manufacturer: Cincinnati

Used Cincinnati model Argos 112P-65-20-1150-UL 112mm parallel counter rotating twin screw plastic extruder. S/N 2041843/010. Screw length approximately 3020mm long x 112mm diameter screw, L/D ratio of 27:1. Barre...

BRABENDER 3/4″ LAB EXTRUDER 18623

• Manufacturer: Brabender

Used C.W. Brabender Independent Table Top Extruder. S/N 1067/4. Type IND/EXTR/16-04-000. 3/4″ diameter 25:1 L/D ratio barrel. Four (4) zone temperature control panel. Extruder driven by a 1 HP D/C motor with SCR ...

DAVIS STANDARD 165mm (6.5″) EXTRUDER 19033

• Manufacturer: Davis-Standard

One used (1) Davis Standard model 165MM60T 165mm (6.49″) extruder having a 34:1 L/D ratio with a nine (9) zone electrically heated, water cooled (closed loop), vented and plugged barrel at presently an 89″ center...

BELLAFORM BH25-25D 25mm EXTRUDER 14768

Bellaform co-extrusion package consisting of the following:Bellaform model BH25-25D 25mm extruder. S/N P19-330877, 10.5 kW AC motor with tachometer and drive, 220-Volt operation. 25:1 L/D air cooled barrel with 3...