Used Machine Tools in Greater Poland, Poland

Robland circular saw with carriage and milling machine

• Manufacturer: Robland

Robland saw and milling machine, two 2.2 kW, 380V motors, adjustable saw blade up and down and at an angle of 0-45°, milling spindle diameter 30 mm, two spindle speeds: 3000 and 6000 rpm, machine tested and ready...

Griggio 940 Band Saw

• Manufacturer: Griggio

Griggio Band Saw Wheel width: 940mm 5.5kW motor, 380V power supply Tilting table Band dimensions: min. 6590 - max. 6710mm Machine dimensions: h: 286cm, w: 160cm, l: 100cm (can be transported horizontally) Machine...

Panel Saw Holzmann FKS 315VFN – 3200

• Manufacturer: Holzmann

Panel saw Holzmann FKS 315VFN – 3200 carriage 320 cm, blade height adjustment up-down and angle manually, main motor 5.5 kW, downshooter on a separate motor, 2 cutting speeds, max blade 315 mm, Diameter of the do...

Altendorf tkr 45 sliding table saw

• Manufacturer: Altendorf

Altendorf TK R 45 sliding table saw, 140cm carriage, 5.5kW main motor, 400 blade capacity, Hydraulically adjustable blade tilt and up-down, 85cm cutting width on the right side, Machine in good condition.

SCM nova si40 sliding table saw

• Manufacturer: SCM / SCMI

SCM Nova Si40 Sliding Table Saw 320cm carriage, 7kW main motor, 0.75kW scoring unit, Right-side motorized culage up to 1226mm, 2 speeds: 3500 and 5000 rpm, Digital readout on the carriage, Used machine, very good...

Panhnas 690 type 320cm sliding table saw

Panhans sliding table saw, 320 cm carriage on bars, hydraulic up-down and angle adjustment of the saw blade, 5.5 kW main motor, separate scoring unit, 3 cutting speeds, maximum blade size 400 mm, machine in good ...

APS KS-160 crosscut saw

APS KS-160 Crosscut Saw Cutting width: 450mm Maximum cutting height: 160mm with a material width of approximately 180mm Blade diameter: 550mm Motor: approximately 5.5kW, 380V Material pressure: Pneumatic blade he...

Cross-cut Saw Felder kappa 400 format 4

• Manufacturer: Felder

Cross-cut Saw Felder kappa 400 format 4 carriage 320cm, tilting and up-down saw blade electrically adjustable culage on the right side manually adjustable up to 1250mm, kerf 1.1KW, main motor 7.3KW, 3 cutting spe...

Robland NZ 3800 format saw

• Manufacturer: Robland

Robland NZ3800 sliding table saw with a carriage, scoring unit with a separate motor, carriage length 380 cm, 0-45° tilt adjustment with electrical readout, saw blade up and down adjustment, motorized right-hand ...

Felder K700 S Panel Saw

• Manufacturer: Felder

Felder K700 S Cart 280cm 0-45 degrees electronically adjustable tilt Top-bottom electronically adjustable Gullet 0.65KW

Stenner resaw band saw

• Manufacturer: Stenner

Engine: 11KW | Wheel width: 900mm | Cutting band width: 75mm | Cutting height adjustment: manual | Cutting width adjustment: manual

Robland PS 3200 silver line sliding table saw

• Manufacturer: Robland

Cart: 320cm | Main engine: 7KW | Rotation speed: 3 | Maximum shield size: 450mm | Slope: 0-45, electrically adjustable with readout | Up-and-down saw: electrically adjustable, no reading | Culaga on the right si...

Vertical Wall Saw

Vertical wall saw, 220V power supply, cutting unit adjustable in two directions, dimensions 3 meters by 2.3 meters, saw in good working order, ready to work,

Tornado sliding table saw

Main engine: 5.5KW | Rotation speed: 3000, 4000, 5000 | Maximum shield: 400mm | Undercutter: 0.75KW, 120mm | Cart: 320cm | Culaga on the right side: manually adjustable up to 1300mm | Slope: 0-45, manually adjus...

Griggio Unica 500 430cm sliding table saw

• Manufacturer: Griggio

Technical data: The length of the trolley: 430 cm | Engine size: 5.5 KW on inverter | Engine size undercutter: 0,75 KW | Up-down adjustment: Yes, electrically | 0-45° adjustment: Yes, electrically | Cutting width...