Used Custom Metalcraft Inc. Processing

115 Gal Custom Metalcraft Mix Tank, S/S

• Manufacturer: Custom Metalcraft Inc.

115 Gal Custom Metalcraft Mix Tank, S/S Used 115 Gal Custom Metalcraft mix tank, model 4A006762700, stainless steel construction, dish top and bottom, rated for atmosphere at 100 F, approximately 12" top access, ...

CUSTOM METALCRAFT INC 20 cuft Stainless Steel tote/hopper tank (~150 gal)

• Manufacturer: Custom Metalcraft Inc.

(2) Approx 20 cu.ft. Stainless Steel tote/hopper tank (~150 gal). Stackable and portable on wheels. 3'6" x 3'6" x 9" T/T with 32" H cone. 56" Overall Height. 6" outlet with butterfly valve. 18" top opening/lid. ...

Custom Metalcraft 1058800 #17376

• Manufacturer: Custom Metalcraft Inc.

150 gallon stainless steel sanitary mixing tank by custom metalcraft, model 1058800, serial # 32180. Features all stainless steel construction with ground and polished welds for food grade compliance, vessel is 3...

RECONDITIONED 1,500 GALLON CUSTOM METALCRAFT PROCESSOR – S/S – JACKETED (#9217)

• Manufacturer: Custom Metalcraft Inc.

1 – used 1,500 gallon Custom Metalcraft Model 1090600 Dome Top, Dish Bottom Pressure Wall Processor. T-304 stainless steel. No agitator. Top pressure manway. 3 in. tri-clamp bottom outlet. Jacketed on dish bottom...

10 CU. FT. (80 GAL) CUSTOM METALCRAFT RIBBON BLENDER - S/S

• Manufacturer: Custom Metalcraft Inc.

10 CU. FT. CUSTOM METAL CRAFT RIBBON BLENDER - Single Shaft, Double Helical Ribbon - 3' L x 2' W x 27" Deep Trough - Approx. 10 Cu. Ft. or 80 Gallon Capacity - 24" Dia. Ribbon - Mixer has Two 2" Sanitary Dischar...

Tank, 500-Gallon, Stainless Steel, Scrape Agitation, Jacketed, #5991294

• Manufacturer: Custom Metalcraft Inc.

Metal Craft 500-gallon stainless steel full jacketed and scrape agitated tank, constructed of 304 stainless steel. Measures 56" diameter x 58" straight side with flat top and dish bottom. Set up for side and bott...

350 Gallon Custom Metalcraft/Transtore stainless totes, (5)

• Manufacturer: Custom Metalcraft Inc.

Metalcraft 4' Modular Belt Shuttle Conveyor

• Manufacturer: Custom Metalcraft Inc.

Metalcraft 4' Modular Belt Shuttle Conveyor, uses a pneumatic piston to extend and retract the belt. - Modular belt: 48″L x 18″W - Drop height: 53″ - Powered by a Reliance A-C 1 HP motor.

Metalcraft 8' x 2' Modular Belt Conveyor

• Manufacturer: Custom Metalcraft Inc.

Metalcraft 8' x 2' Modular Belt Conveyor - Modular belt: 98″L x 24″W - Guide rails at one end narrow workable width to 10″. - Previously used with a metal detector.

Metalcraft 8' x 2' Modular Belt Conveyor

• Manufacturer: Custom Metalcraft Inc.

Modular belt: 98″L x 24″W, guide rails at one end narrow workable width to 10″. Previously used with a metal detector. Tested working condition. 1287 KT condition: Good