Semiconductors » Deposition Equipment (CVD, PVD)

Search By Manufacturer

Search By Country

Building Filters

12

Used tech

  • Trusted Seller
    Ion Tech Sorcerer Ion Miller/(CHA

    Ion Tech Sorcerer Ion Miller/(CHA Mark 40 Series)

    • Manufacturer: CHA Industries

    * 26″L x 26″ Diameter chamber. * Inficon IC4 thickness monitor. * Dual ION Tech 5cm ION guns. * Pfiefer tph 2000 turbo pump. * Rebuilt two stage direct drive Ebara dry pump.

    Billerica, MA
  • Trusted Seller
    Applied Materials P 5000 Mark

    Applied Materials P 5000 Mark II-J

    • Manufacturer: Amat
    • Model: P5000

    Chemical Vapor Deposition (CVD) Wafer Size: Equipment Configuration: – SBC Board Model: SV21 – Cassette Indexer: 6″ Clamp – Elevator: 8 Slot – Monitors: Qty 2 – Robots: Phase III – Robot Blade: Standard Va...

    United States
  • Trusted Seller
    no-image_en.png

    Applied Komatsu Tech 1600

    • Manufacturer: Komatsu

    Applied Komatsu Tech 1600 AKT, 1600, PVD, Sputter Deposition, 300mm AKT, 1600, PVD, Sputter Deposition, 300mm PVD Cluster tool including process chambers (Al 2x, Cu, Ti, sputter etch) configured for 300 mm square...

    Bree, Ireland
  • Trusted Seller
    no-image_en.png

    DYNA TECH DT-AUV1200

    • Manufacturer: Unknown

    DYNA TECH DT-AUV1200 UV CURE

    Bree, Ireland
  • Trusted Seller
    no-image_en.png

    Surface Tech Sys MXP Multiplex ICP ASE HR

    • Manufacturer: Unknown

    Surface Tech Sys MXP Multiplex ICP ASE HR SURFACE TECHNOLOGY SYSTEMS STS SILICON ICP ETCHER Silicon Etcher – Year 2003

    Bree, Ireland
  • Trusted Seller
    no-image_en.png

    Amerimade Tech 12 FT RAS-PVCC CU ECD SYSTEM

    • Manufacturer: Amerimade

    Amerimade Tech 12 FT RAS-PVCC CU ECD SYSTEM Amerimade, 12 FT RAS-PVCC CU ECD SYSTEM, Copper Plating Tool, 300mm Amerimade, 12 FT RAS-PVCC CU ECD SYSTEM, Copper Plating Tool, 300mm Copper (Cu) ElectroChemical Depo...

    Bree, Ireland
  • Trusted Seller
    UF 150070301 MD PVD sputtering

    UF 150070301 MD PVD sputtering machine

      was built in 2015 in China by LONGKOU BITE VACCUM TECHNOLOGY CO., LTD. This extremely high-tech machine is used in the vacuum coating process. The technological vacuum combined with the high voltage inside a cham...

      $13,881 USD

      Get financing

      Est. $273/mo

      Jelenia Góra, Poland
    • no-image_en.png

      Quester Tech APT-5850

      • Manufacturer: Quester Tech

      Atm NSG CVD Wafer size: 8"

      Yongin-si, South Korea
    • no-image_en.png

      Quester Tech APT-5850

      • Manufacturer: Quester Tech

      Atm NSG CVD Wafer size: 8"

      Yongin-si, South Korea
    • no-image_en.png

      Quester Tech APT-5850

      • Manufacturer: Quester Tech

      Atm NSG CVD

      Yongin-si, South Korea
    • no-image_en.png

      Quester Tech APT-5850

      • Manufacturer: Quester Tech

      Atm NSG CVD

      Yongin-si, South Korea
    • Trusted Seller
      no-image_en.png

      Canary Technology CT 3533-130

      • Manufacturer: Unknown

      Canary Technology CT 3533-130 THERMCO/TEMPRESS TUBE FURNACE Six Pack Tube Furnace consisting of one three stack 4″ capable and one 6″ capable three stack furnace Two three stack Thermco furnace banks sharing one ...

      Bree, Ireland

    Overview

    CVD (Chemical Vapor Deposition) and PVD (Physical Vapor Deposition) are advanced coating technologies used to apply thin films or coatings to various substrates. CVD involves chemical reactions at the surface of a heated substrate, while PVD involves physical vaporization of a material which then condenses on the substrate. These processes are widely used in industries such as electronics, aerospace, and automotive for enhancing material properties like hardness, wear resistance, and corrosion protection.

    FAQ

    What should I consider when buying a CVD/PVD machine?

    Consider the machine's capacity, compatibility with desired coating materials, and the specific application requirements. Also, check for the machine's condition, age, and maintenance history.

    How do I ensure the CVD/PVD machine is shipped safely to my location?

    Utilize a specialized transport service experienced in handling delicate and high-value industrial equipment. Ensure the machine is properly packaged and secured to prevent any damage during transit.

    What is the maintenance schedule for a CVD/PVD machine?

    Regular maintenance includes cleaning the chamber, checking and replacing filters, inspecting seals, and calibrating the system. Follow the manufacturer’s guidelines for detailed maintenance intervals to ensure optimal performance.