Used Machine Tools in Brandenburg, Germany

Kjellberg FINOX 4351 B

• Manufacturer: Kjellberg

1.4313: X 3 CrNiMo 13-4 | 1.4413: X 3 CrNiMo 13-4 | 1.4317: GX 4 CrNi 13-4 | 1.4414: GX 4 CrNiMo 13-4

Kjellberg FINOX 4316 AC

• Manufacturer: Kjellberg

1.4301: X 5 CrNi 18-10 | 1.4306: X 2 CrNi 19-11 | 1.4311: X 2 CrNiN 18-10 | 1.4541: X 6 CrNiTi 18-10 | -: AISI 321

Kjellberg FINOX 4842 B

• Manufacturer: Kjellberg

1.4710: GX 30 CrSi 7 | 1.4713: X 10 CrAl 7 | 1.4724: X 10 CrAlSi 13 | 1.4742: X 10 CrAlSi 18 | 1.4762: X 10 CrAlSi 25 | 1.4828: X 15 CrNiSi 20-12 | 1.4833: X 12 CrNi 23-13 | 1.4840: GX 15 CrNi 25-20 | 1.4841: X ...

Kjellberg GARANT S

• Manufacturer: Kjellberg

Construction steel: S275 to S355 | Ship steel: A32/36, D32/36, E32/36, F32/36, A/D/E40 | Fine-grained steel: S275 to S460 | Pressure tank steel: P195 to P460 | Pipe steel: L210 to L450 | Cast steel: GE200, GE240...

Kjellberg PRIMA

• Manufacturer: Kjellberg

Construction steel: S235 to S355 | Ship steel: A, B, D, A32/36, D32/36 | Pressure tank steel: P195 to P275 | Pipe steel: L210 to L245 | Cast steel: GE200, GE240 | Reinforcing steel: BSt 420

Kjellberg InFocus Pluspole

• Manufacturer: Kjellberg

Max. welding current: 500 A | Welding current at 100% duty cycle: 450 A (focusing gas VARGION S) | Shielding gas: Ar | Focusing gasesvarigon smison arvarigon he50smison he50: Ar + 300 ppm O2Ar + 300 ppm NOAr / H...

Kjellberg KJELCUT AQUA

• Manufacturer: Kjellberg

Kjellberg CUTi 70

• Manufacturer: Kjellberg

Stromquelle: CUTi 70 | Netzanschluss*: 3x 400 V | Schneidstrombei 35 % edbei 100 % ed: 70 A50 A | Schneidbereich: bis 30 mm | Abmessungen (l x b x h): 470 x 180 x 250 mm | Masse: 16,4 kg | Plasmabrenner: KjellCu...

Kjellberg CUTi 120

• Manufacturer: Kjellberg

Stromquelle: CUTi 120 | Netzanschluss*: 3x 400 V | Schneidstrombei 35 % edbei 100 % ed: 120 A80 A | Schneidbereich: bis 50 mm | Abmessungen (l x b x h): 610 x 230 x 410 mm | Masse: 28,5 kg | Plasmabrenner: Kjell...

Kjellberg CUTFIRE

• Manufacturer: Kjellberg

Kjellberg HiFocus 440i neo

• Manufacturer: Kjellberg

Power source: HiFocus 440i neo | Mains voltage*: 3x 400 V, 50 Hz | Cutting current (at 100 % duty cycle): 440 A | Marking current: 5 - 50 A | Cutting range: mild steel: 0.5 - 120 mmstainless steel: 1 - 120 mm | ...

Kjellberg Q 3000

• Manufacturer: Kjellberg

Power source: Q 3000 / 3000 plus | Cutting current at 100% d.c.1: 20 - 300 A | Marking current at 100% d.c.1: 5 - 60 A | Cutting ranges mild steelrecommendedmaximumpiercing2: 0.5 - 60 mm80 mm50 mm | Cutting rang...

Kjellberg K 200

• Manufacturer: Kjellberg

Power source: K 200 | Cutting current: 60 - 200 A | Marking current: 35 A | Cutting range: 1 - 60 mm | Plasma gases: O2, Air, N2 | Swirl gases: Air, N2 | Plasma machine torch: K-Torch | Hand torch: K-Torch M

Kjellberg Smart Focus 300

• Manufacturer: Kjellberg

Power source: Smart Focus 300 | Mains voltage*: 3x 400 V, 50 Hz | Cutting current: 35 - 300 A | Marking current: 10 - 50 A | Cutting rangemaximumrecommended: 80 mm1 - 60 mm | Piercing: Ar, N2 | Plasma gases: O2,...

Kjellberg KA 7-UPP

• Manufacturer: Kjellberg
• Amperage: 1,202 ampere

Welding automat: KA 7-UPP | Welding current: 1200 A | Solid wire: 2 x 2.0 - 2 x 3.0 mm | Flux cored wires: 2 x 2.02 x 2.4 mm2 x 3.2 mm | Travel speed: 0.1 - 1.5 m/min | Dimensions(l x w x h): 1050 x 600 x 900 mm...