Used Processing in Hamburg, Germany

2002 Comandulli EDILUX 8+4 DX-
- Manufacturer: Comandulli
- Model: Edilux
Edge polishing machine for marble and granite straight edge working direction from right to left 8 heads, 4 bevels plate thickness min. 20 mm, max. 100 mm total power – kW 26.7 total weight of the machine: 4,200 ...
Hamburg, Germany
2009 MEC P 4 600x300 + 800x300
- Manufacturer: MEC
Stone splitting system 1. Stone splitting machine P4 600x300 built in 2009 T 42 2. Stone splitting machine P4 800x300 built in 2011 T 60 Pressure: Bar 315 More used machines at: www.janssen-usedmachines.com New s...
Hamburg, Germany
1995 Levi Tunisi LT 1204-
- Manufacturer: Levi Tunisi
- Model: LT
Block cutter for marble complete with unloading and cross cutter (crosscut saw) Saw blade 1,550 mm Motor 150 hp Complete with trolley, unloading and crosscut saw Voltage V. 380 Hz 50 More used machines at: www.ja...
Hamburg, Germany
2015 Intermac Master 850
- Manufacturer: Intermac
CNC machining center/CNC bridge saw 60-tool magazine Saw blade included Bsolid CAD/CAM software Machine equipped with deposition tools, drain, and drums for straight edges Vacuum cleaner included More used machin...
Hamburg, Germany
1998 SIMEC LM2000/212
- Manufacturer: Simec
- Model: LM 2000
Marble polishing line Slabs with 10 polishing heads per slab + 2 calibration units (80 cm) Slab loading carriage Intermediate roller conveyors Tilt-type slab unloading roller conveyor More used machines at: www.j...
Hamburg, Germany
2006 Löffler MG 100
- Manufacturer: Löffler
Edge polisher 5 planetary heads, some in mint condition 1 pivoting water groove support 1 calibration support Right-to-left rotation New control system Modern circular guides Machine length approx. 13.7 m Excelle...
Hamburg, Germany
2004 GMM Lexta 36 FULL
- Manufacturer: GMM
- Model: Lexta 36
Bridge saw Max. saw blade diameter: 825 mm Optional: Automatic table, swivel head, frequency converter for motor pulley The frequency converter pulley, display, and motor pulley were replaced in November 2024. Vo...
Hamburg, Germany
2003 Montresor LOLA 1000
- Manufacturer: Montresor
- Model: Lola 1000
Edge grinder for straight edges Grinding and polishing of straight edges with upper and lower chamfers, Calibration 8 heads for straight polishing 3 upper and 3 lower spindles for chamfering Water drop unit The m...
Hamburg, Germany
2006 PELLEGRINI FB 220
- Manufacturer: Pellegrini
- Model: FB220
More used machines at: https://www.janssen-usedmachines.com/ New machines at: www.janssen-steintechnik.de Completely overhauled flame and stick machine for processing granite slabs with a guarantee. Machine and e...
Hamburg, Germany
2010 Prussiani Champion 60-
- Manufacturer: Prussiani
- Model: Champion
CNC 5-axis monoblock bridge saw with vacuum lifting system Vacuum lifter for automatic loading Tilt table X-axis 3,500 mm Y-axis 2,200 mm Z-axis 300 mm 5-axis head from 0° to 90° CAD/CAM software Wcam2k More used...
Hamburg, Germany
1997 Pedrini M 589 GR-
- Manufacturer: Pedrini
Block cutter Engine, rated power – 210 kW. 56 vertical discs (cutting thickness 12 mm) Min. disc, d: 1000 mm Max. disc, d: 1300 mm Shaft D: 180 mm; shaft length: 1000 mm Diameter of the horizontal cutting disc – ...
Hamburg, Germany
1992 Pedrini M 580 GR-
- Manufacturer: Pedrini
Block cutter - SCALETTA Motor, rated power – 190 kW. 32 vertical discs (cutting thickness 12 mm) Min. disc, d: 1000 mm Max. disc, d: 1600 mm Shaft D: 110 mm; shaft length: 600 mm Diameter of the horizontal disc –...
Hamburg, Germany
1995 Pedrini M 580 GR-
- Manufacturer: Pedrini
Block cutter - SCALETTA Motor, rated power – 190 kW. 32 vertical discs (cutting thickness 12 mm) Min. disc, d: 1000 mm Max. disc, d: 1600 mm Shaft D: 110 mm; shaft length: 600 mm Diameter of the horizontal disc –...
Hamburg, Germany
2003 Bavelloni Egar 250-4
- Manufacturer: Bavelloni
- Model: Egar 250
CNC Machining Center The machine has only 2,300 operating hours! X-axis 2,730 mm Y-axis 1,620 mm Z-axis 300 mm Tool positions: 19 Table size: 2,500 x 1,200 mm The machine comes complete with all the tools shown i...
Hamburg, Germany
2005 Omag Mill 4X-
- Manufacturer: Omag
- Model: Mill 4X
CNC machining center with 4 axes 25-position tool magazine Collet replaced with original Saccardo parts. Touchscreen and computer are brand new Approximately 20 steep taper chucks are also included with the machi...
Hamburg, Germany