Used Mineral Processing

Trusted Seller
ERIEZ Skid Mounted Pilot Flotation Column System
- used
- Manufacturer: Eriez
Tank Size: UNUSED ERIEZ Skid Mounted Pilot Flotation Column System
North America
Trusted Seller
ERIEZ StackCells
- used
- Manufacturer: Eriez
3 Units - UNUSED ERIEZ 4' (1.2m) StackCells Advanced Flotation Nominal Size 4' (1.2m) Diameter Approx. 1m3 Volume Two-State Flotation Flotation of <0.10mm Low-Pressure Sparging System
North America
Trusted Seller
METSO OUTOTEC TankCell e5
- used
- Manufacturer: Metso
8 Units - UNUSED OUTOTEC TankCell e5 with FloatForce 500 Mixing Mechanism 5 Cubic Meter Drive Assembly, V-Belt Tube Assembly DN 80 Tube Assembly 3" Rotor FloatForce 500 Stator Stand FloatForce 500 Lower Shaft
North America
Trusted Seller
WEMCO 44
- used
- Manufacturer: Wemco
Tank Size: 6 Units - Banks of 2-Cell, WEMCO Model #44 Flotation Machines
North America
Trusted Seller
METSO OUTOTEC DR300/500
- used
- Manufacturer: Metso
6 Units - DENVER DR300/500 Flotation Cell Mechanisms, Sub A, SS w/DR300 Dual Drive Bridge
North America
Trusted Seller
UNUSED FLSMIDTH 36’ x 24' (11m x 7.3m) Dual Pinion Sag Mill with 2 ABB 9,000 kW (12,069 HP) VFD Motors for Total Power of 18,000 kW (24,138 HP)
- used
- Manufacturer: FLSmidth
UNUSED FLSMIDTH 36’ x 24' (11m x 7.3m) Dual Pinion SAG Mill with 2 ABB 9,000 kW (12,069 HP) VFD Motors for Total Power of 18,000 kW (24,138 HP) ABB Motor (2), 9000 kW, active front end, synchronous, 180 RPM, IM72...
North America
Trusted Seller
UNUSED FLSMIDTH 36' x 17' (11m x 5m) SAG Mill with 13,500 kW (18,355 HP) ABB Wrap Around Drive 60 HZ
- used
- Manufacturer: FLSmidth
UNUSED FLSMIDTH 36' x 17' (11m x 5m) SAG Mill with 13,500 kW (18,355 HP) Wrap Around Drive 60 HZ 36' dia. x 17' L EGL ABB 13,500 kW (18,355 HP) Wrap Around Drive Motor Braking System Feed Chute and Transporter Hy...
North America
Trusted Seller
5' x 3' (1.5m x 0.9m)) SAG Mill with 20 HP motor
- used
5' x 3' (1.5m x 0.9m) SAG Mill with 20 HP (15 kW) motor
North America
Trusted Seller
HARDINGE-KOPPERS 32' x 12' (9.8m X 3.7m) EGL SAG Mill, 6,800 HP dual drive (2 x 2,550 kw)
- used
- Manufacturer: Hardinge
HARDINGE-KOPPERS 32' x 12' (9.8m X 3.7m) EGL SAG Mill, 6,800 HP dual drive (2 x 2,550 kw) (2) 3400 HP (2550 kW) Wound Rotor Induction Motors McLellan MLC 32/12S Liner Handler
North America
Trusted Seller
UNUSED FEECO 6' dia. x 48' L Rotary Cooler
- used
- Manufacturer: FEECO
UNUSED FEECO 6' dia. x 48' L Rotary Cooler
North America
Trusted Seller
UNUSED OUTOTEC 3.7m x 1.5m (12.1' x 4.9') SAG Mill, 350 HP (260 kW)
- used
- Manufacturer: Larox
UNUSED OUTOTEC 3.7m x 1.5m (12.1' x 4.9') SAG Mill, 350 HP (260 kW) Manufactured in 2017 WEG Three Phase 350 HP Induction Motor - Squirrel Cage Set of Rubber Liners
North America
Trusted Seller
UNUSED PROMINENT Meta MTMa Diaphragm Pump
- used
- Manufacturer: Prominent
UNUSED PROMINENT Meta MTMa Diaphragm Pump
North America
Trusted Seller
8 Units - WEMCO Model WPL-B Torque-Flow Pumps, size 2 x 11
- used
- Manufacturer: Wemco
8 Units - WEMCO Model WPL-B Torque-Flow Pumps, size 2 x 11
North America
Trusted Seller
HARDINGE KOPPERS 12' X 5' (3.7m x 1.5m) Sag Mill with 250 HP motor
- used
- Manufacturer: Hardinge
HARDINGE KOPPERS 12' X 5' (3.7m x 1.5m) Sag Mill with 250 HP (186 kW)motor Operating Skid Helical Gear 250 HP (186 kW) Motor, 60 Hz
North America
Trusted Seller
AEROFALL 17' x 5' (5.2m x 1.5m) Sag Mill
- used
- Manufacturer: AEROFALL
AEROFALL 17' x 5' (5.2m x 1.5m) Sag Mill Spur Type Ring Gear Approximately 80% Refurbished
North America