search

Model

  • 1997 DAEWOO ACE-V45/V50 Vertical Machining Center with auto. pallet changer

    $17,500 - Houston, TX
    • Manufacturer: Daewoo

    daewoo ace-v45/v50 vert. machining center w/automatic pallet changer (apc) mitsubishi 520mr cnc control; (2) 47.2” x 19.7” pallets; 30 atc with cat40 gripper 40.1” x 19.6” x 20” travel; through spi...

  • 1999 DAEWOO MYNX-500

    $24,500 - Santa Ana, CA
    • Manufacturer: Daewoo
    • Control: CNC (FANUC 21M)

    coolant thru spindle fanuc series 21-m controller chip conveyor

  • 2000 DAEWOO MYNX-500

    $29,900 - Santa Ana, CA Recently Added
    • Manufacturer: Daewoo
    • Control: CNC (FANUC 21M)

    coolant thru spindle fanuc series 21-m controller chip conveyor

  • 2001 DAEWOO DHP-500

    $79,500 - Santa Ana, CA
    • Manufacturer: Daewoo
    • Control: CNC (Fanuc 16M)

    fanuc 16i-m control x: 33.4 inch | y: 27.6 inch | z: 29.5 inch | atc: 60 | mfg: daewoo | mpn: dhp-500 | rpm: 12000 rpm | power: 33 hp | taper: ct 50 | region: (texas)? | weight: 41,000 lbs | contro...

  • 1999 DAEWOO DMV-500

    $24,000 - Santa Ana, CA
    • Manufacturer: Daewoo
    • Model: DMV-500
    • Control: CNC

    x: 40.2 inch | y: 19.7 inch | z: 20.1 inch | atc: 30 | mfg: daewoo | mpn: dmv-500 | rpm: 8000 rpm | power: 20 hp | taper: cat40 | region: west | tablel: 19.68 inch | tablew: 47.24 inch | control: ...

  • 1999 DAEWOO DMV-500 VMC VERTICAL MACHINING CENTER WITH MITSUBISHI MELDAS 64 CONTROL, 40.2″ X 19.7″ X 20.1″

    $29,500 - Bethlehem, PA
    • Manufacturer: Daewoo
    • Spindle Taper: 40

    specifications table size: 47.2″ x 19.7″ x-axis travel: 40.2″ y-axis travel: 19.7″ z-axis travel: 20.1” spindle taper: 40 spindle drive motor (30 min/cont.): 20/15 hp maximum spindle speed: 8,000 r...

  • 1997 DAEWOO ACE 50 VMC VERTICAL MACHINING CENTER WITH MITSUBISHI MELDAS 64 CONTROL, 40” X 20” X 20”

    $26,500 - Bethlehem, PA
    • Manufacturer: Daewoo
    • Spindle Taper: 40

    specifications table size: 47.2″ x 19.7″ maximum table load: 1,760 lbs spindle nose to table top: 5.9” – 26” (evenly distributed) x-axis travel: 40” y-axis travel: 20” z-axis travel: 20” rapid trav...

  • 2001 DAEWOO MYNX 500 VMC CNC 4-AXIS VERTICAL MACHINING CENTER WITH FANUC 21M CONTROL, 40″ X 20″ X 22″

    $47,500 - Bethlehem, PA
    • Manufacturer: Daewoo
    • Spindle Taper: CAT 40

    specifications table size: 39″ x 17″ spindle nose to table top: 4″ – 29″ x-axis travel: 40″ y-axis travel: 20″ z-axis travel: 22″ spindle speeds: 0-8,000 rpm spindle taper: cat 40 spindle motor: 20...

  • 1999 DAEWOO DMV 500 MACHINING CENTER - CNC (VERTICAL) [MQ-010440]

    $31,500 - United States
    • Manufacturer: Daewoo

    daewoo dmv 500 cnc vertical machining centerspecifications: -- x-axis travel 40" -- y-axis travel 19.7" -- z-axis travel 20" -- control fanuc 21m -- table size 47.2" x 19.7" -- spindle taper ...

  • 2003 Daewoo ACE VM-510 Flat Guided Heidenhain milling machine

    $74,699 - Bruckmühl, Germany
    • Manufacturer: Daewoo

    machine is flachgefuehrt x 1020mm y 510mm z 625mm cooling through spindle the machine is equipped with a heidenhain control and a 24 x tool changer arm (cam atc) power-on hours of the spindle: hour...