- Trusted Seller
1997 DAEWOO PUMA 200C CNC Turning Center with Bar Feeder
- Manufacturer: Daewoo
- Model: Puma 200C
- Spindle bore: 76 mm
Fanuc 18T CNC Control 8″ 3 Jaw Hydraulic Chuck 4,500 RPM A2-6 Spindle 3" Spindle Bore 2.56″ Bar Capacity 13.78″ Turning Diameter: 15.75″ Turning Length: 20.08″ Swing Over Bed 9.53″ X-Axis Travel 17.32″ Z...
Los Angeles, CA - Trusted Seller
2004 Daewoo Puma TT2500SY
- Manufacturer: Daewoo
- Model: Puma 2500SY
- Power requirement: 76.62 kW
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.* Equipped With: Fanuc ...
Lake Elsinore, CA - Trusted Seller
1997 Daewoo Puma 250B with 12" Hyd. Chuck, Chip Conveyor, Tool Presetter, Tailstock, ONLY 7848 Cutting Hours
- Manufacturer: Daewoo
- Model: Puma 250B
- Spindle bore: 76 mm
12" 3 Jaw Hydraulic Chuck Tool Presetter Chip Conveyor Hydraulic Tailstock RS 232 Port Interface Boxed Ways Coolant Tank with Pump All Available Static Tooling All Available Manuals Wired 220V Electrics **...
DAEWOO PUMA 10 FANUC 3T CNC LATHE SPINDLE DRAW BAR DRAWBAR TUBE
- Manufacturer: Daewoo
- Model: Puma 10
THIS PART WAS REMOVED FROM A DAEWOO PUMA 10 CNC LATHE WITH FANUC 3T CONTROL THAT WE DISMANTLED.
$200 USDSanta Clarita, CADAEWOO PUMA 12S-3A 10S CNC LATHE TURRET TOOL HOLDER BLOCK PLASTIC COVER EACH 1
- Manufacturer: Daewoo
- Model: Puma 12S-3A
THIS PART CAME FROM A 1996 DAEWOO PUMA 12S-3A CNC LATHE WITH FANUC 16-T CONTROL THAT WE STRIPPED
$60 USDLos Angeles, CADAEWOO PUMA 10 CNC LATHE TOOL HOLDING HOLDER BLOCK 3X4'' .LOT OF 3 PIECES
- Manufacturer: Daewoo
- Model: Puma 10
GOOD FEEDBACK DESIRED. THIS PART CAME FROM A DAEWOO PUMA 10 CNC LATHE WITH FANUC CONTROL THAT WE DISMANTLED. CALIFORNIA BUYERS ADD 9.5% SALES TAX
$60 USDLos Angeles, CADAEWOO PUMA 10 CNC LATHE TOOL HOLDING HOLDER BLOCK 3X4'' .LOT OF 3 PIECES
- Manufacturer: Daewoo
- Model: Puma 10
GOOD FEEDBACK DESIRED. THIS PART CAME FROM A DAEWOO PUMA 10 CNC LATHE WITH FANUC CONTROL THAT WE DISMANTLED. CALIFORNIA BUYERS ADD 9.5% SALES TAX
$60 USDLos Angeles, CAFANUC INPUT DRIVE A03B-0807-C011 NO. N3354 DAEWOO PUMA 12S-3A LOT OF 7 PIECES
- Manufacturer: Daewoo
- Model: Puma 12S-3A
THIS PART CAME FROM A 1996 DAEWOO PUMA 12S-3A CNC LATHE WITH FANUC 16-T CONTROL THAT WE STRIPPED
$60 USDLos Angeles, CAFANUC INPUT DRIVE A03B-0807-C011 NO. N3354 DAEWOO PUMA 12S-3A LOT OF 7 PIECES
- Manufacturer: Daewoo
- Model: Puma 12S-3A
THIS PART CAME FROM A 1996 DAEWOO PUMA 12S-3A CNC LATHE WITH FANUC 16-T CONTROL THAT WE STRIPPED
$60 USDLos Angeles, CA
DAEWOO PUMA 250MB CNC LATHE TOOLING HOLDER BLOCK NC TOOL 23.4025 1" VDI EACH 1
- Manufacturer: Daewoo
- Model: Puma 250MB
THIS PART CAME FROM 1998 DAEWOO PUMA 250MB CNC LATHE WITH FANUC 18T CONTROL THAT WE DISMANTLED. CALIFORNIA BUYERS ADD 9.5% SALES TAX
Los Angeles, CA
Daewoo Puma 250-B CNC Lathe Turning Center with Tailstock Fanuc 18T CNC Control
- Manufacturer: Daewoo
- Model: 250B
Daewoo Puma 250-B CNC Lathe Turning Center with Tailstock Fanuc 18T CNC Control, Runs Good MAX SWING OVER BED: 22.44" MAX SWNG OVER SADDLE: 14.57" MAX TURNING DIAMETER: 15.75" MAX TURNING LENGTH: 25.6" SPI...
Oxnard, CA- Trusted Seller
2003 Daewoo Puma 230C
- Manufacturer: Daewoo
- Model: Puma 230C
Payment shown is based on Financing Terms. Please ask the Sales Manager for more details. Used Daewoo Puma 230C CNC Turning Center for Sale. *All specifications are approximations and are subject to verification....
Lake Elsinore, CA 
1997 DAEWOO PUMA 250B
- Manufacturer: Daewoo
- Model: Puma 250B
Chip Conveyor Tool Presetter Tailstock Parts Catcher Fanuc 18T CNC Control
- Trusted Seller
Daewoo Puma 250LB CNC Lathe, 1997
- Manufacturer: Daewoo
- Model: Puma 250LB
Swing: 22.7 in | Machining length: 46.0 in | Max. turning diameter: 15.7 in | Chuck size: 12.0 in | Bar capacity: 3.0 in | Power: 30.0 hp | Max rpm: 3500.0 rpm | Tailstock: Yes
Los Angeles, CA 
Daewoo Puma 2500SY CNC Lathe
- Manufacturer: Daewoo
- Model: Puma 2500SY
Good condition Daewoo Puma 2500SY CNC Lathes manufactured in 2005. Located in USA and other countries. Click request price for more information.
USADaewoo Puma 10 CNC Lathe
- Manufacturer: Daewoo
- Model: Puma 10
Good condition Daewoo Puma 10 CNC Lathes manufactured in 1988. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
