Building Filters

618

Used Daewoo in USA

  • Trusted Seller
    DAEWOO BC18S

    DAEWOO BC18S

    • Manufacturer: Daewoo
    • Model: BC18

    This is a Daewoo BC18S electric forklift 36 Volt. This has a 2,700 lbs capacity with charger. SR# 4159 Sale Price $4,750 AS-IS- Unknown condition

    $4,750 USD
    Canton, OH
  • Trusted Seller
    Daewoo Electric Pallet Jack

    Daewoo Electric Pallet Jack

    • Manufacturer: Daewoo

    7" X 47 1/2" Forks, 12" Width Name: Electric Pallet Jack | Arrival date: 07-11-2025 | Dimensions l x w x h (inches): 91 x 31 x 52 | Weight (lb.): 1060 | Available quantity: 1

    $150 USD
    Euclid, OH
  • Trusted Seller
    Auction
    Daewoo G25-2

    Daewoo G25-2

    • Manufacturer: Daewoo
    • Model: G25

    Auction for 1 Daewoo G25-2 fork lift. This item is used and not currently in working condition. This is an LP gas engine with 4500lb lift capacity and was manufactured in the late 90's. The diagnosis was a bad wa...

    Cincinnati, OH
    Visit Auction Website
  • Trusted Seller
    2000 DAEWOO DMV-400

    2000 DAEWOO DMV-400

    • Manufacturer: Daewoo
    • Model: DMV 400
    • Spindle taper: BT 40

    Fanuc 18m Control RS-232C Port Interface Coolant Tank Chip Conveyor ** Does not include the chucks or drilled & tapped table plate**

    Ohio, USA
  • Trusted Seller
    DAEWOO PUMA 230C

    DAEWOO PUMA 230C

    • Manufacturer: Daewoo
    • Model: Puma 230C

    Gantry parts loader

    Ohio, USA
  • Trusted Seller
    2000 DAEWOO PUMA 200

    2000 DAEWOO PUMA 200

    • Manufacturer: Daewoo
    • Model: Puma 200
    • Spindle bore: 76 mm

    Used CNC Lathe. Features include a 20.1" swing, 18" machining length, and 4,500 RPM max. Equipped with Mitsubishi Meldas control, SMW bar loader, Turbo conveyor, and ATS work holding chuck. SMW bar loader Turbo c...

    Ohio, USA
  • Trusted Seller
    2004 DAEWOO DVC-400

    2004 DAEWOO DVC-400

    • Manufacturer: Daewoo
    • Model: DVC 400

    Used Vertical Machining Center for sale. Used condition, equipped with FANUC 21I-MB. Specs include 22" x-axis, 15.7" y-axis, 22.4" z-axis, 24 hp, 12 RPM, 24 ATC, and 40 taper. Table: 28"W x 18"L. FANUC 21I-MB

    Ohio, USA
  • Trusted Seller
    2004 DAEWOO Puma 400C

    2004 DAEWOO Puma 400C

    • Manufacturer: Daewoo
    • Model: Puma 400C
    • Spindle bore: 82 mm

    2004 Daewoo Puma 400C CNC Lathe: 27.6" swing, 44.1" machining length, 20" chuck, 5.5" bar capacity, 50 hp, 1,500 RPM, and tailstock. Features 20” Schunk Roto Chuck, chip conveyor, and programmable tailstock. 20” ...

    Ohio, USA
  • Trusted Seller
    2005 DAEWOO PUMA 240MS

    2005 DAEWOO PUMA 240MS

    • Manufacturer: Daewoo
    • Model: Puma 240

    Used CNC Lathe, 3-axis, in used condition. Features: 21.65" swing, 17.28" machining length, 2.55" bar capacity, 20 hp, 5,000 RPM max speed, 13.77" turning diameter.

    Ohio, USA
  • Trusted Seller
    2000 DAEWOO LYNX 200B

    2000 DAEWOO LYNX 200B

    • Manufacturer: Daewoo
    • Model: Lynx 200B
    • Spindle bore: 52 mm

    Used CNC Lathe for sale. Features 18.11" swing, 11.8" machining length, 8.0" chuck, 2.0" bar capacity, 15.0 power, max RPM of 4500, and 10.2" turning diameter.

    Ohio, USA
  • Trusted Seller
    2007 DAEWOO DMV-3016Ld

    2007 DAEWOO DMV-3016Ld

    • Manufacturer: Daewoo
    • Model: DMV 3016LD
    • Spindle taper: BT 40

    2007 DAEWOO DMV-3016Ld Vertical Machining Center in used condition with 30"x16.1"x20.1" travel, 15 hp, 8,000 RPM, CAT-40 taper, and 20 tool ATC. Features Fanuc Oi-MC CNC Control, flood coolant, chip pans, and coo...

    Ohio, USA
  • Trusted Seller
    DAEWOO MYNX 500 VERTICAL MACHINING

    DAEWOO MYNX 500 VERTICAL MACHINING CENTER 12033A

    • Manufacturer: Daewoo
    • Model: Mynx 500

    MODEL: MYNX 500 SERIAL #: AVSE0644 YEAR: 2000 47" x 20" TABLE X AXIS 40" Y AXIS 20" Z AXIS 22" 8000 RPM 8"-30" SPINDLE NOSE TO TABLE TAPER CAT 40 24 ATC 20 HP DRIVE X & Y AXIS RAPID TRAVERSE 945 IPM Z AXIS R...

    $15,000 USD

    Get financing

    Est. $295/mo

    Monclova, OH
  • Trusted Seller
    2004 Daewoo Lynx 210

    2004 Daewoo Lynx 210

    • Manufacturer: Daewoo
    • Model: Lynx 210

    - Daewoo Lynx 210 Cnc Lathe 2004 - - Equipped With: - Fanuc i- series CNC Control - Rigid Tapping - 6″ 3 Jaw Hydraulic Chuck - A2-5 Spindle Nose - Tool Presetter - Parts Catcher - Hydraulic Tailstock and Quill - ...

    Livonia, MI, USA
  • Trusted Seller
    2001 Daewoo Mynx 530

    2001 Daewoo Mynx 530

    • Manufacturer: Daewoo
    • Model: Mynx 530
    • Spindle taper: CT 40

    Used 2001 Daewoo Mynx 530. Machine Tool Bids offers plenty of Vertical Machining Centers and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Daewoo Mynx 530 or...

    Chicago, IL
  • Trusted Seller
    2004 Daewoo Lynx 210A

    2004 Daewoo Lynx 210A

    • Manufacturer: Daewoo
    • Model: Lynx 210A
    • Spindle bore: 38 mm

    Used Daewoo Lynx 210A. This pre-owned CNC Lathe is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Daewoo CNC Lathe we can review ma...

    $10,500 USD

    Get financing

    Est. $206/mo

    Chicago, IL
  • no-image_en.png

    Daewoo DMV 400 Machining Center

    • Manufacturer: Daewoo
    • Model: DMV 400

    Good condition Daewoo DMV 400 Machining Centers available between 1999 and 2000 years. Located in USA and other countries. Click request price for more information.

    USA
12345