Used Bending & Forming in Bavaria, Germany

Trusted Seller
1970 Kolbus HL
- Manufacturer: Kolbus
Head & Tail Banding Machine Kolbus HL
Emskirchen, Germany
1992 Long bending machine Jorns NL125-SM-OP 6x1.25
- Manufacturer: Jorns
Used Jorns hydraulic press brake, foot switch, retractable sheet metal supports, emergency stop rail, motorized shear, water seal in the upper jaw, 9-channel control, control on the swivel arm, The machine wil...
Hohenbrunn, Germany
1998 Long bending machine Jorns NL100-SM CNC400 6x1.25
- Manufacturer: Jorns
Used Jorns press brake, foot pedal, program control without stop, emergency stop rail. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be ...
Hohenbrunn, Germany
1998 Jorns NL125-SM-CNC400A-6x1.25 long bending machine
- Manufacturer: Jorns
used hydraulic Jorns swivel-bending machine, with hydraulic roller shear SM 1.5 and depth stop (4 stop fingers), with emergency stop rail, rearwardable sheet supports and control on the swivel arm, machine was re...
Hohenbrunn, Germany
1991 Long bending machine Jorns NL 125-SM-OP/9 6x1.25
- Manufacturer: Jorns
Used hydraulic Jorns press brake, motorized shear, foot switch, retractable sheet metal supports, control unit on the swivel arm. The machine will be professionally repaired, inspected, and cleaned, and will the...
Hohenbrunn, Germany
2014 Long bending machine Jorns SL-300S-1250-RH-OV-DP-CP200
- Manufacturer: Jorns
Used Jorns swing-bending machine with the following features: • Reinforced version with additional stand unit • Deep draw with motorized depth stop system 1250mm, with 4 stop fingers • CNC touch graphics control ...
Hohenbrunn, Germany
2013 double shearing machine Jorns TP150-RH-1150-CNC8000-6.4-hs
- Manufacturer: Jorns
Double-press brake machine, with the following equipment: - 4 pneumatic clamping fingers with short clamping fingers - long accessory rail - foot control - sheet metal cassettes - upper beam with bending groove -...
Hohenbrunn, Germany
1970 Combination rounding and beading machine 1000mm
- Manufacturer: Beutler
Used 3-roll bending machine, with beading device 1080mm, bar diameter 14mm, Machine is sold as is, without warranty.
Hohenbrunn, Germany
2011 Jorns TwinMatic-300-SO-1150-CNC8000 double folding machine
- Manufacturer: Jorns
Used Jorns TwinMatic-300-SO-1150-CNC8000 double press brake. The machine is a robust welded construction with 9 columns, 9 clamping cylinders, and 36 K38 coupling joints mounted on a base frame. The machine is ...
Hohenbrunn, Germany
1998 Prinzing RM 52/103 rotary machine
- Manufacturer: Prinzing
Used Prinzing 3-roll rolling machine, with wire insertion grooves, folding groove, back roller manual feed, wheel with scale. The machine will be professionally repaired, tested, and cleaned, and will then be f...
Hohenbrunn, Germany
1998 Geka RM 50 rotary machine
- Manufacturer: Geka
Used Geka three-roll rotary cutter with folding groove and wire insertion grooves. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perf...
Hohenbrunn, Germany
Beading machine Fasti 401/63/1.25
- Manufacturer: Fasti
Used manual Fasti beading machine with stop plate and 3 sets of rollers. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be performed.
Hohenbrunn, Germany
Trusted Seller
Auction
PETER SAUER & SOHN Spare parts of a tube bending machine
PETER SAUER & SOHN Spare parts of a tube bending machine
Huisheim, Germany
Visit Auction Website
Trusted Seller
BENDER Unimet 1000 ST
- Manufacturer: BENDER
Safety tester for medical devices, complete, sg.Zst.
$925 USD
Landshut, Germany
Trusted Seller
2019 WEMO 8-5 xDesign
- Manufacturer: WEMO
2019 WEMO 8-5 xDesign Type: 8-5 xDesign Year: 2019 Volts: 3X 400 VAC +N+PE 50Hz Amps: 16 Bar: 6 The 2019 WEMO 8-5 xDesign is a machine primarily used in the manufacturing industry, specifically for metal f...
Munich, Germany