Used Lathes in Saxony, Germany

ROTO RECORD face plate

• Manufacturer: ROTO RECORD

Face plate ROTO RECORD PLV 400x8 ( PLV400x8 ) TGL 30-22313 4x threaded hole: M16 x 2.0, depth: 45 mm Mounting flange: Ø 135 / 140 mm, depth: 18 mm ( conical ) with one-piece reversible jaws and 2x chuck key used,...

ROTO RECORD face plate

• Manufacturer: Pagus

Face plate ROTO RECORD PL 315x5 ( PL315x5 ) TGL 30-22313 mounting flange: Ø 79 / 81 mm, depth: 13 mm ( conical ) with one-piece reversible jaws used, tested !

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS Grooves. 14 / 24 mm Outside ø: 295 mm | Hole circle ø: 104 mm | Bore ø: 60 mm | N max: 600 U/min | Dimensions: 295 x 295 x 40 mm

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS Hole M8 / M12 and 4 x Ø 12 mm Outside ø: 360 mm | Center hole ø: 20 mm with thread | Flange: Ø 250 mm | Hole circle inside: Ø 135 mm | Outer bolt circle: Ø 225 mm | Thickness with flange: 55 mm | ...

ROTO RECORD face plate

• Manufacturer: Pagus

Face plate ROTO RECORD PL 315x6 TGL 30-22313 New ! preserved !

WMW 3-jaw combi feed

• Manufacturer: WMW

3-jaw combination chuck, three-jaw chuck with individually and centrally adjustable jaws WMW, ROTO RECORD used, tested !

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS short cone used, tested ! External ø: 400 mm | Hole circle: 135 mm | Drilling ø: 100 mm | Height with jaws: 140 mm | Flange: 175 mm | Total height: 190 mm | Dimensions: 400 x 400 x 200 mm

ROTO RECORD face plate

• Manufacturer: ROTO RECORD

Face plate ROTO RECORD PLV 500x8 TGL 30-22313 Outside ø: 500 mm | Sin nombre en la placa: 170 mm | Bore ø: 135 mm | N max: 560 U/min | Dimensions: 500 x 500 x 165 mm

WMW 4-jaw combi feed

• Manufacturer: WMW

4-jaw combination chuck, four-jaw chuck with individually and centrally adjustable jaws WMW, ROTO RECORD (without screws) used, tested !

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS preserved ! Outside ø: 630 mm | Hole circle ø: 170 mm | Bore ø: 135 mm | Dimensions: 630 x 630 x 185 mm

SEW gearmotor with brake

Geared motor with brake SEW FHF37DT80K4/BMG/TH/ISU4 0.55 kW 58 rpm 400 V IP5 4 New !

CMB energy chain

Energy chain, energy guiding chain, closed CMB TD35/250 Spare part e.g. for lathe CMB TD35/250 ! used, tested !

WMW, ABW Centering point

• Manufacturer: WMW

Center point, lathe point, center punch point, live center WMW, ABW ZN206 MK6 full center used, tested !

CMB telescopic cover

Telescopic cover, left side CMB TD35/250 Spare part e.g. for lathe CMB TD35/250 ! See also S3067 and S3068 ! used, tested !

WMW Centering point

• Manufacturer: WMW

Center point, lathe point, center punch point WMW, ABW ZNA 205 TGL8893 MK 5 As good as new ! Dimensions ( center point without inserts ): 226 x 93 x 93 mm