Used Machine Tools in Saxony, Germany

WMW AP205x195x65

• Manufacturer: WMW

14 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a=13.9; b= 24.2; c= 9.8; h=19.9 mm

Clamping Units Rottler

• Manufacturer: Rottler

4 pieces clamping claws Dimension per clamping claw: L: 420 x W:400 x H: 400mm Clamping surface 80 x 80mm, clamping on both sides Clamping travel approx. 120mm Clamping width flexible Mounting: -Base area LxW: 42...

Clamping Units SEDIN STANKO

• Manufacturer: Sedin

These 4x clamping claws are for sale. Used as workpiece clamps for turning and drilling work Cast steel construction Workpiece holder: Clamping surface WxH: 70 x 65mm, internal and external clamping, clamping str...

WMW 800x455x250

• Manufacturer: WMW

ram plate of a PYE 160S press Use: e.g. for reducing the installation height of the press or shortening the working distance (forward run) - with centre bore Ø 40mm continuous - with 6x part circular drilling Ø 1...

WMW 810 x 690 x 190

• Manufacturer: WMW

T-slots centric Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Floor-plate length: 810 mm | Plate width: 690 mm | Plate height: 190 mm | Hole diameter: ca. 119...

bolster plate AP 3500x2000x360 (5768)

There are 2 plates for sale. (price per plate) Surface milled Longitudinal groove Quantity 8 Size a=35mm,h=62mm,b=60mm,c=25mm Center distance 250mm Side fastening D=27x58mm Quantity long side 3 short side 2

WMW milling head

• Manufacturer: WMW

Milling head , drill head , angle head WMW, WEMA Engelsdorf UA1 360° rotatable in two planes Hollow shaft ( drive ): Ø 28 mm, wedge width: 6 mm used, tested !

1986 NARADI PRAHA JU 30

• Manufacturer: NARADI PRAHA

air pressure clamping unit application area operation of vise clamping consists: air pressure motor, impuls mechanism and a control mechanism air pressure supply necessary averaged operation pressure 0,4- 0,6 MPa...

BILZ leveling shoe

Leveling shoe, machine foot, wedge foot, free-standing, 4 pieces BILZ PK 4/1 used, tested !

BILZ leveling shoe

Leveling shoe, machine foot, wedge foot, free-standing, 2 pieces BILZ 4-VRC New !

DECKEL clamping drive

• Manufacturer: Deckel / Maho

Clamping drive, manual with fine adjustment DECKEL spare part for milling machine DECKEL KF12 ! used, tested !

DECKEL trapezoidal threaded spindle

• Manufacturer: Deckel / Maho

Trapezoidal threaded spindle COVER Thread: Ø 24 mm spare part for milling machine DECKEL KF12 ! used, tested !

VEM magnetic coupling

• Manufacturer: VEM

Magnetic coupling VEM Dessau KLDO5 TGL 22050 ( TGL22050 ) New !

VEM magnetic coupling

• Manufacturer: VEM

Magnetic coupling VEM Dessau 3KL5 TGL 4734/59 ( TGL4734/59 ) Overhauled, tested !

PAGUS magnetic coupling

• Manufacturer: Pagus

Magnetic coupling PSP POHONY ELS 1,25 24V CSN 02 6517 ( ČSN026517 ) 4431013/63 used, tested !