Used Machine Tools

7-1/2" X 37" X 10" SET-UP-BLOCK w/(6) T-SLOTS

7-1/2" X 37" X 10" SET-UP-BLOCK EQUIPPED WITH: (6) T-SLOTS GENERAL SPECIFICATIONS Block Width 7-1/2" Block Height 37" Block Depth 10" SEE STOCK NUMBERS 26783 AND 26785 ALSO.

58" X 26" ALPHA-MAGNETS “AC2000SD” MAGNETIC CHUCK w/SD CONTROLLER - 19 SUPPORT BLOCKS

58" X 26" ALPHA-MAGNETS MAGNETIC CHUCK WITH CONTROLLER SERIAL NO 08G03.01, MODEL AC2000SD EQIPPED WITH: SD CONTROLLER (18) SUPPORT BLOCKS (3-ROWS OF 6) SPECIFICATIONS: Magnet, Length 58" Magnet, Width 26"

32.75" x 50" x 38.5" HEAVY-DUTY DRILLED & TAPPED ANGLE PLATE w/ADJUSTABLE EXTENSIONS

32.75" x 50" x 38.5" HEAVY-DUTY DRILLED & SLOTTED ANGLE-PLATE EQUIPPED WITH: (6) Slots On Face - (1) Slot On Top Threaded Mounting Holes Face & Top (4) Adjustable Mounting Arm Extensions (6) Eyebolts GENERAL SPEC...

2-1/2" X 10' (120”) SPEGO "506-20” TURNMATIC 5-SPINDLE HYDRAULIC BAR-FEED w/SELF-CONTAINED HYDRAULICS - (2) HEAVY-DUTY SUPPORT STANDS

• Manufacturer: Spego

2-1/2" SPEGO "TURNAMIC 506" 5-SPINDLE BAR-FEED Serial No 96-06-481, Model 506-20 EQUIPPED WITH: Hand And Auto Controls Forward And Reverse Controls Self Contained Hydraulic System (2) Heavy-Duty Support Stands CA...

Bleacher Boss

• Manufacturer: Boss

The Bleacher Boss is what you need to move your bleachers. Powered bleacher tool to move manual bleachers in and out. Used but in good condition.

7-1/2" X 37" X 10" SET-UP-BLOCK w/(6) T-SLOTS

7-1/2" X 37" X 10" SET-UP-BLOCK EQUIPPED WITH: (6) T-SLOTS GENERAL SPECIFICATIONS Block Width 7-1/2" Block Height 37" Block Depth 10" SEE STOCK NUMBERS 26784 AND 26785 ALSO.

7-1/2" X 37" X 10" SET-UP-BLOCK w/(6) T-SLOTS

7-1/2" X 37" X 10" SET-UP-BLOCK EQUIPPED WITH: (6) T-SLOTS GENERAL SPECIFICATIONS Block Width 7-1/2" Block Height 37" Block Depth 10" SEE STOCK NUMBERS 26783 AND 26784 ALSO.

2012 2.56" X 60" MTA INTERNATIONAL "V65LE" SERV0-FEED AUTOMATIC BAR-FEED w/INCLINED LOAD FEEDER - HAND HELD PLC CONTROL -

• Manufacturer: MTA

#V65LE MTA INTERNATIONAL AUTOMATIC BAR-FEED NEW 2012, SERIAL NO 16120339, MODEL V65LE EQUIPPED WITH: HAND HELD CONTROL PLC CONTROL SERVO-FEEDING INCLINED LOADER FEED TABLE CATALOG SPECIFICATIONS: Round Bar Stock ...

1941 10" KEARNEY & TRECKER DIVIDING HEAD

• Manufacturer: Kearney & Trecker

10" KEARNEY & TRECKER DIVIDING HEAD SERIAL NO. 3/3254, NEW 1941, MODEL K Equipped With: One Index Plate That Is On It (We Have No Others)

2010 300 TON ENERPAC "ZE6440SJ-H & RR30024" DOUBLE-ACTING HYDRAULIC SYSTEM w/ZE6440SJ-H ENERPAC PUMP - RR30024 ENERPAC CYLINDER - CONTROLS & GAUGING

• Manufacturer: Enerpac

300 TON ENERPAC DOUBLE-ACTING HYDRAULIC SYSTEM w/PUMP - CYLINDER AND CONTROLS Pump Serial No A12907001C, Pump Model ZE6440SJ-H Cylinder Model RR30024 EQUIPPED WITH: 7.5 HP Enerpac Hydraulic Pump (Model ZE6440SJ-H...

8 GPM COOLJET "70-30Sf HIGH PRESSURE PORTABLE COOLANT SYSTEM w/HIGH CAPACITY FILTER - 1000 PSI OPERATING PRESSURE

70-30SF COOLJET HIGH-PRESSURE COOLANT SYSTEM Model 70-30SF, Part No 1190, EQUIPPED WITH: Single High Capacity Filter Single High Pressure Outlet Filtered High/Low Pressure Oil Sight Gauge - Easy Oil Drain Casters...

26" x 12' CLARMATIC INDUSTRIES HEAVY-DUTY CONVEYOR-TYPE COOLANT RECLAMATION FILTRATION SYSTEM w/CM-151 COOLANT MANAGER - 5 HP DAYTON PUMP

• Manufacturer: Dayton

26" x 12' CLARMATIC INDUSTRIES HEAVY-DUTY CONVEYOR-TYPE COOLANT RECLAMATION FILTRATION SYSTEM EQUIPPED WITH: Feed Hopper - Coolant Storage Tank - Chain Type Chip Conveyor CM-151 Coolant Mangager 5HP Dayton Pump C...

Tool Room

Niagara Ring And Circle Shear Z20058A

• Manufacturer: Niagara
• Model: 13RC

3 1/2" - 44" Circle Diameter Range 1 5/8" Diameter Of Cutters 34 1/2" Tail Stock Depth 9.25" Head Throat depth Capacity 16 Gauge mild Steel 1/2HP Motor Foot Pedal Control

Tools

Misc Tools