Used Processing in Germany

2017 SEGAB AS-01-00, 500x1500
- Manufacturer: Segab
suitable for quartz sand, horizontal lamella bed 500x1500 mm, throughput approx. 3 t/h, injection fan 1.1 kW, sand preheating, heating capacity 20 kW, required extraction 2,500 m³/h, control system
Meinerzhagen, Germany
2017 MICHENFELDER Electrical Engineering MICOMP 5 Type G-CH
- Manufacturer: Michenfelder Elektrotechnik
Process control and evaluation unit, sheet steel housing with viewing window, pre-moisture measurement (used sand feed belt), rod electrode with temperature sensor, electrode holder, moisture measuring probe type...
Meinerzhagen, Germany
Festo valve manifold MPA-S with multipole connection / 32E-MPA 32P-SGL-R-MBAU-JL3JL
- Manufacturer: Festo
Unused stock item Valve terminal MPA-S with multi-pin plug connection 32E-MPA / 32P-SGL-R-MBAU-JL3JL Valve terminal, electrical part 32E MPA valve terminal with multi-pin plug connection Electrical control MPM mu...
Freiberg, Germany
NN Hammermühle
- Manufacturer: NN
for shredding of soft to medium-hard material such as grains, cereals, biomass, wood chips or feed. How it works: 4 rotating hammers strike the material to be shredded against a sieve
Willich, Germany
Herbort - Spare parts for cutting machines, type 122, 120 N, etc
- Manufacturer: Herbort
for cutting machine 122 N: Circular knife shaft complete with 91 knives - 2.8 mm cut, Flat knife - holder without knife for 2.8 mm cut, Round knife - shaft with nut, without knife, Mincer shaft pitch 28 for 1...
Willich, Germany
2007 F.A.T. KVGS
- Manufacturer: F.A.T.
Standing frame, backwater sand cooler, pneumatic pressure vessel conveyor, overpressure filter, filling line, ladder, level measuring probes, railing
Meinerzhagen, Germany
1977 GISAG ASTE 6,3
- Manufacturer: Gisag
Capacity approx. 6-8 m³/h, feed hopper, smooth rubber belt, beater bar rotor, adjustable discharge cover, drive motor 5.2 kW
Meinerzhagen, Germany
Chrome ore sand separation plant
- Manufacturer: Klein
Sand hopper, vibrating dosing chute, two-stage chromite separation (air/permanent magnetic roller), radial blower fan, control system
Meinerzhagen, Germany
1984 PAULUS HP 4011/1
- Manufacturer: Paulus
Capacity approx. 6 m³/h, drive 11 kW, inlet chute, centrifugal disk, baffle ring
Meinerzhagen, Germany
1985 UHDE/KÜTTNER DWF 2100 x 5600 / SM 71/6
- Manufacturer: Küttner
Vibrating conveyor trough with air-permeable floor, dimensions (LxW) 5,600 x 2,100 mm, 2 unbalanced vibration motors 2x 3.5 kW, stationary exhaust air/cooling hood, water spray device, fan, drive power 18.5 kW, c...
Meinerzhagen, Germany
2016 Reißaus & Baumberg CM 4-8 x 5640
- Manufacturer: Reißaus & Baumberg
Double-jointed design, vertical, sand dosing slide, additive dosing pumps/valves, flow monitoring, mixing capacity 4-8 t/h, throat depth 4.0 + 1.64 m, discharge height approx. 1,763 mm, connected load 14 kW, swiv...
Meinerzhagen, Germany
2007 WÖHR DWM WDS 8-25 to
- Manufacturer: Wöhr
Double-joint design, vertical, sand hopper / dosing slide, additive dosing pumps / valves, flow meters, mixing capacity 8-25 t/h, throat depth 5.5 + 2.0 m, discharge height approx. 2300 mm, connected load 19 kW, ...
Meinerzhagen, Germany
1978 AXMANN TURBOMIX TMV 5 B
- Manufacturer: Axmann
Single-joint design, upright, capacity approx. 5 t/h, throat depth approx. 2.5 m, premixer 1.5 kW, high-speed turbo mixer 5.5 kW, additive metering pumps, connected load 8.5 kW, control system
Meinerzhagen, Germany
1987 AXMANN TURBOMIX TME 2
- Manufacturer: Axmann
Rigid single-arm design, stationary (upright), sand bunker, sand dosing slide, additive dosing pump and valves, mixing capacity 2 t/h, throat depth 1.0 m, drive power 4.0 kW, connected loads 380 V, 50 Hz, control...
Meinerzhagen, Germany
1999 F.T.L. - Foundry & Technical Liaison Ltd. Model CM 013-5
- Manufacturer: F.T.L. - Foundry & Technical Liaison Ltd.
Single-joint design, stationary (upright/hanging), without column, sand dosing slide, dosing pumps and valves, mixing capacity 5 t/h, projection 1.5 m, drive power 4.0 kW, connected loads 380 V, 50 Hz, control unit
Meinerzhagen, Germany
Krones Canmatic Labeler
- Manufacturer: Krones
- Model: Canmatic
Good condition Krones Canmatic Labelers available between 1995 and 2001 years. Located in USA and other countries. Click request price for more information.
USA