Used Processing in Illinois, USA

Superfici Valtorta Bravorobot Spraying Robot

• Manufacturer: Superfici

This 5-Axes Cartesian robot is designed for panel finishing an offers a high-quality painting experience thanks to its robotic movements which simulate manual work. Precision, reliability, and delicacy of the han...

Fitzpatrick Chilsonator Model 16Lx20D with HAS030 Comminutor Mill – Stainless Steel

• Manufacturer: Fitzpatrick

51188005 Used Fitzpatrick Chilsonator Model 16Lx20D with HAS030 Comminutor Mill All stainless-steel wetted parts. The Chilsonator uses dual 16" 20" rolls with controlled hydraulic pressure and feed augers to c...

Paint Media Mill, 8" x 30" Milling Chamber, 6 Gallon, 10 HP Motor

• Manufacturer: UnknownUnknown

50556009 Used Paint Media Mill. includes 8" diameter X 30" high milling chamber, approximate 6 gallon. Stainless Steel screening section, jacketed chamber. Driven by 10 HP, 220/440 V, 1740 RPM, 3-phase, 60 cycle ...

Hosokawa Multiprocessor ZPS Milling System | ACM Mill w/ ATP Classifier & Alpine 100 AFG Jet Mill | Frame Mounted

• Manufacturer: Alpine

53228005 Used Hosokawa Multiprocessor ZPS Milling System. Incl. (1) ACM mill with ATP classifier and (1) Hosokawa/Alpine 100 AFG Counter Jet Mill with 55kW (73-3/4"hp) compressor powered by a 1.0 kW (1.34hp) moto...

Fitzpatrick Chilsonator System with Comminutor Mill & GKM Screener – Complete Dry Granulation Line

• Manufacturer: Fitzpatrick

51188004 Used Fitzpatrick Chilsonator System with Comminutor Mill & GKM Screener Complete Dry Granulation Line. Chilsonator Model 16Lx20D, a Fitzpatrick HAS030 Comminutor Mill, and a GKM Siebtechnik KTS 2600/5DS...

Mitchell and Sons Storall Feeder

• Manufacturer: MitchelMitchel

53776001 Used Mitchell and Sons Storall Feeder, 10 cubic meters; 9' diameter. Serial# S88105. Previously used in a phosphate briquetting plant. Our freight specialists can assist you with door to door transportat...

Hosokawa Mikro Pulverizer Model 4SCB – Carbon Steel, 60 HP, Food Application

• Manufacturer: Hosokawa

53264039 Used Hosokawa Mikro Pulverizer Model 4SCB Carbon Steel, 60 HP, Food Application. 20" diameter x 12" wide rotor with 4 rows swinging stirrup hammers. 8" inlet. Driven by a 60 hp, 3/60/550 volt, 1775 rpm...

Turbo Mill Model CMTM-1500 – 200 HP, Clam-Shell Design, Blower, Cyclone, Airlock, VFD Controls (

• Manufacturer: Cable Management

52791017 Turbo Mill Model CMTM-1500 200 HP, Clam-Shell Design, Blower, Cyclone, Airlock, VFD Controls (Used). The CMTM-1500 turbo mill is designed to grind rigid and semi-rigid materials into a fine particle siz...

VDL Industrial Rotary Airlock (Built 2022) – B-HT350EX00 for Sale

54253002 Used VDL Industrial Products Rotary Air lock, Model B-HT350EX00. Driven by 0.37kW / 0.50 HP, 3/60/277/480 volt, 1730/15 rpm motor. Serial# U-221467/B. Built 2022.

ADM Stainless Steel Separator, Model C.V. | 48" OD, 891 Gallon, Built 2024

• Manufacturer: ADMADM

54197002 Unused ADM Stainless, Type 48" OD C-110 Separator, Model C.V. 891 Gallon. Approximately 48" diameter x 103" straight side. Vertical, 304 stainless steel. Internal rated 600/FV PSIG at -20 to 350 degrees...

Farrel Rubber/Plastic Laboratory Calender Mill – Inverted "L" 4-Roll, Adjustable Knives

• Manufacturer: Farrel

54180001 Used Farrel 4-Roll Inverted "L" Rubber/Plastic Laboratory Calendar Mill. 6" D x 13" L rolls. 500 degrees F max. roll temp. Up to 35 RPM. Fixed center roll w/ adjustable bottom, top, and offset. Full her...

CB Mills RH Series Horizontal Media Mill – Model RH-045 for Sale

• Manufacturer: CB MillsCB Mills

54128001 Used CB Mills RH Series Horizontal Mill, Model RH-045, 45 Liters continuous throughput. Grinding beads filling rate; 34.50 - 39.10 (equivalent to 75-85% liters). Maximum product pressure; 2.5 bar (~37 ps...

Fitzpatrick DAS06 FitzMill Hammer/Knife Mill – Explosion Proof (XP) Motor

• Manufacturer: Fitzpatrick
• Model: DAS06

11059358 Used Fitzpatrick DAS06 Fitzmill Hammer/Knife Mill. Stainless Steel; Pan Feed; Driven by 7.5 HP, 230/460V, 1740 rpm Explosion Proof (XP) motor. Serial# 10321. Mounted on stainless steel cart with wheels.

Fitzpatrick Chilsonator – Model 4L x 10D, 10" x 4" Stainless Steel Rolls, 50–100 kg/hr Capacity

• Manufacturer: Fitzpatrick
• Model: 4L X 10D

49227002 Used Fitzpatrick Chilsonator Model 4L x 10D, 10" x 4" Stainless Steel Rolls, 50100 kg/hr Capacity. Dependent on density of product and roll pressure and screw speed is 50 to 100 kg/hr. (110 to 220 lbs./...

Excel PP-48ST Shrink Wrapping Machine

• Manufacturer: Excel
• Model: PP-48ST

Good condition Excel PP-48ST Shrink Wrapping Machines. Located in USA and other countries. Click request price for more information.