Used Stone Equipment in Germany

1989 Arbes STH 140-25-
- Manufacturer: Arbes
Gang saw Maximum block size is 3000 x 1800 mm Maximum 26 blades Push rod stroke 750 mm Main motor has 55 kW and operates at approximately 65 strokes per minute. Lowering speeds range from 0 to 300 mm per hour. Wa...
Hamburg, Germany
2002 Marmo Meccanica LTH 7212-
- Manufacturer: Marmo Meccanica
- Model: LTH 7212
Edge polisher machine for straight and round edges Calibrator / water nose Chamfers inclined at 45° (diameter 120-130 mm) 7 polishing heads Additional lower chamfer inclined at 45° (diameter 120-130 mm) 2 rollers...
Hamburg, Germany
1996 PELLEGRINI CNC Robot Wire RW 2600 SPACE Cod. 46-22-
- Manufacturer: Pellegrini
- Model: Robot Wire
Technical specifications: CNC wire saw for cutting two and three dimensional profiles of marble, granite and other ornamental stones Diamond wire, fully CNC controlled on 6 axes Diamond wire speed: 0-40 m/sec. Di...
Hamburg, Germany
2009 BRETON Countourbreton NC 260 K 23-
- Manufacturer: Breton
- Model: NC260
CNC machining center 1-24 a new spindle was installed Tool magazine: 26 positions Steep taper, angle gear with saw blade and vacuum suction cup are supplied with the machine The machine is supplied with a 2nd ful...
Hamburg, Germany
2010 MBD Lace 229/2-
- Manufacturer: Janssen Steintechnik
Calibration machine for slabs 2 calibration units Diamond tools per head: 24 Diamond tool width: 12 mm Rated power: 101 kW Voltage: 400 V – 50 Hz Usable working width: 300 mm – 2,100 mm Usable working thickness: ...
Hamburg, Germany
2002 SIMEC NT2/2M-
- Manufacturer: Simec
Block Cutter Maximum input block size: 2,300 x 3,400 x 2,100 mm Maximum number of vertical saws: 2 Maximum vertical saw blade diameter: 1,700 mm Minimum vertical saw blade diameter: 1,000 mm Maximum horizontal sa...
Hamburg, Germany
2004 BM Diamond 80L C800
- Manufacturer: B.M. Officine
- Model: Diamond
80 blades gang saw for marble Stroke 800 mm Cutting capacity 3200 x 2000 x 2000 mm Blade length 4,400 mm Engine power 110 kW Number 1 block trolley Number 2 block baskets Machine in good working condition (80 bla...
Hamburg, Germany
2011 Bacci Dino LPL 80/106-
- Manufacturer: Bacci
Calibration and polishing machine Maximum working width: 800 mm Maximum working thickness: 70 mm Calibration spindles: 1 Polishing spindles: 6 Calibration spindle power: 22 kW Polishing spindle power: 5.5 kW Work...
Hamburg, Germany
2002 PELLEGRINI DF JOLLY 2500-
- Manufacturer: Pellegrini
- Model: DF2500
Wire saw - Refurbished with 6 months warranty. Installation and training can be carried out at extra cost. No. 2 + 1 axis (270° rotation axis, small wheels) Motorized and rotating carriage for multiple cuts (the ...
Hamburg, Germany
Sasso Flat 84-
- Manufacturer: Sasso
- Model: Flat
Edge grinding machine a new belt new guide rollers new pressure rollers new bearings for the belt pulleys calibration 8 polishing heads 2 heads for the upper edge 2 heads for the lower edge underfloor saw for wor...
Hamburg, Germany
PELLEGRINI DF2500-
- Manufacturer: Pellegrini
- Model: DF2500
Wire saw - Refurbished with 6 months warranty. Installation and training can be carried out at extra cost. - Diameter of drive wheels 2500 mm - Maximum dimensions of the block 4.0 x 2.4 m - Motorized block carria...
Hamburg, Germany
Pellegrini DF 2500
- Manufacturer: Pellegrini
- Model: DF2500
Wire saw - Refurbished with 6 months warranty. Installation and training can be carried out at extra cost. - Diameter of drive wheels 2500 mm - Maximum dimensions of the block 4.0 x 2.4 m - Motorized block carria...
Hamburg, Germany
2006 PELLEGRINI POLYWIRE 5.9 - Nr.2
- Manufacturer: Pellegrini
- Model: Polywire
Multiwire with 9 diamond wires Rated power: 37/50 kW Voltage: 380 V – 50 Hz Cutting dimensions: 2,100 mm (height) x 3,500 mm (length) Wire length: 24,500/25,400 mm Wire thickness: max. 8.3 mm Water consumption: 7...
Hamburg, Germany
2000 CMPI ANTARES 2D+8A/800-
- Manufacturer: CMPI
- Model: Antares
Calibration and polishing machine for marble 2 calibration heads 8 polishing heads Max. working width: 800 mm Max. working thickness: 100 mm Min. working thickness: 10 mm Voltage: V/Hz 400/50 Calibration spindle ...
Hamburg, Germany
1999 SIMEC 150RLBM300RL + SVOLGITORE + RAPID3500 + NP2100RX/014
- Manufacturer: Simec
-Marble slab polishing system 150 RL BM 300RL with 8 diamonds and 14 grinding media including two robot loader and unloader -Automatic horizontal unwinder for self-adhesive nylon film SVOLGITORE -Polishing system...
Hamburg, Germany
Pellegrini Polywire Stone Equipment
- Manufacturer: Pellegrini
- Model: Polywire
Good condition Pellegrini Polywire Stone Equipment available between 1999 and 2010 years. Located in Italy and other countries. Click request price for more information.
Italy