Building Filters
Diethei PD 100
- Manufacturer: Diethei
Automatic feed via Diethei PD 100 control For attachment to the right Max. feed length: 2000 mm
$4,569 USDGütersloh, Germany
1993 Emmegi Sirio 2
- Manufacturer: Emmegi
Max. sawing length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor material support Minimum quantity spray device
2005 Pressta Eisele Primus 300
- Manufacturer: Eisele
- Model: PRIMUS 300
Maximum cutter diameter: 300 mm Manual milling feed Angle stop infinitely adjustable with locking points Max. release depth: 110 mm Max. profile height: 190 mm Max. cutter package height: 95 mm Pneumatic ma...
$4,569 USDGütersloh, Germany
2009 Pressta Eisele Sägeanlage V-Cut
- Manufacturer: Eisele
Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control v...
2008 Elumatec DG 104
- Manufacturer: Elumatec
- Model: DG104
Saw blade diameter: 420 mm Max. cutting length: 6,000 mm Min. cutting length: 335 mm Automatic length positioning and angle adjustment via E 555 control with Windows and USB connection Motorized angle adjustm...
- Trusted Seller
2006 WEINIG CONTUREX PROFILING CENTER [WM-010272]
- Manufacturer: Weinig
- Model: CONTUREX
WEINIG CONTUREX CNC Profiling Center: Profiling Center for the manufacturing of small and large batches, JIT per order, rapid reproduction of workpieces - Profiling, Milling, Drilling, and Trimming. -- Working di...
2009 Schüco AF 300
- Manufacturer: Schüco
4-axis machining center with automatic tool change for aluminum, PVC or steel profiles up to 3 mm wall thickness Max. travel X-axis: 4,000 mm Max. travel Y-axis: 530 mm Max. Z-axis travel: 400 mm A-axis trave...
- Trusted Seller
2003 ROTOX EPA 179 CNC CORNER CLEANER [WM-010449]
- Manufacturer: Rotox
- Model: EPA 179
ROTOX EPA 179 CNC Corner Cleaning Machine For Window Fabrication Fully Automatic CNC Corner Bead Cleaner with automatic turning station and inner corner cleaning capabilities for production of PVC window profiles...
2003 Elumatec DG 244
- Manufacturer: Elumatec
- Model: DG244
Max. sawing length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45...
2000 Elumatec DG 244
- Manufacturer: Elumatec
- Model: DG244
Max. sawing length: 6,000 mm Max. saw blade diameter: 550 mm E 550 control unit in mint condition 5 motor-controlled axes (length positioning and degree-accurate angle adjustment for tilting / swiveling on bot...
2001 Rotox KF 348
- Manufacturer: Rotox
- Model: KF 348
Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute preselectable, allowing both steel and aluminum profiles to be processed ...
1996 Pressta Eisele AKF 200 ST
- Manufacturer: Eisele
Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise clamping width: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed via foot switch Profile clamping vi...
$1,347 USDGütersloh, Germany
2000 Schüco PBS
- Manufacturer: Schüco
- Model: PBS
5-axis machining center in very good condition, which can be tested by arrangement Max. processing length: 6,600 mm Y-axis travel: 800 mm Z-axis travel: 500 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0°...
1996 Elumatec TS 161
- Manufacturer: Elumatec
- Model: TS 161
Max. saw blade diameter: 280 mm Pneumatic material feed via two-hand operation minimum quantity spraying Bevel cuts possible on both sides with detent points Roller conveyor and length stops on request
$3,397 USDGütersloh, Germany
2006 Pressta Eisele PV 2000
- Manufacturer: Eisele
- Model: PV 2000
Hydropneumatic operation Profile height: 200 mm below hold-down Max. punching height: 150 mm Abutment height: 150 mm Weight: approx. 400 kg
Elumatec DG244 Window Production
- Manufacturer: Elumatec
- Model: DG244
Good condition Elumatec DG244 Window Productions available between 2001 and 2014 years. Located in Poland and other countries. Click request price for more information.
Poland