V200 Index
- Manufacturer: Index
- Model: V200
Spindle speed: 5000 max rpm, pallet conveyor system: left hand, pallet dimensions 8.66 in (220 mm) x 7.68 in (195 mm), maximum pallet workpiece diameter: 7.28 in ( 185 mm), x-axis linear scale position gauging sy...
Hyde Park, PA
Index V-200 100547
- Manufacturer: Index
- Model: V200
Swing over saddle: 12.8 in (325 mm), max turn length: 15.74 in (400 mm), workpiece conveyor system - right hand mount, Torit Dryflo model DMC-D1 oil mist collector, width dimension shown does not include chip con...
Washington, PA
Index V-200 100534
- Manufacturer: Index
- Model: V200
Swing over saddle: 12.8 in (325 mm), max turn length: 15.74 in (400 mm), workpiece conveyor system - left hand mount, Torit Dryflo model DMC-D1 oil mist collector, width dimension shown does not include chip conv...
Washington, PA
V250 Index
- Manufacturer: Index
- Model: V250
Serial: 600064 Power: 3 PH/50-60 Hz/380-480 V Existing | Weight: 16500.00 lbs 7500.00 kg | Control: Fanuc 16 CNC | Coolant: Yes | C - axis: Yes | Chuck type: 10 in (254 mm) Stace-Allen Model FX-230-2 | Chip conve...
Hyde Park, PA
Warner & Swasey SC32 Slant Bed 2843562
- Manufacturer: Warner & Swasey
- Model: SC32
Two speed ranges, new CNC system, new servo motors, new servo and spindle drive, ways reground
Washington, PA
Mori Seiki ZL-25B 859
- Manufacturer: Mori Seiki
- Model: ZL-25B
Power: Existing | Control: MF-D6 CNC | Tailstock: 42.91 Inch Travel | Spindle bore: 3.15 in 80.01 mm | Chip conveyor: Yes | Spindle speed: 35-3500 RPM Infinitely Variable | Swing over bed: 20.47 in 519.94 mm | Z...
Washington, PA
2002 Index G200 Ball Turning Lathe 511512
- Manufacturer: Index
- Model: G200
Bottom ball turner - custom for ball studs, gantry loading system, torit dryflo mist collector model dmc-c1 coolant mist extraction and filter system, maximum turning length 15.75 in (400 mm), max nominal turning...
Washington, PA
2002 Index G200 Ball Turning Lathe 511487
- Manufacturer: Index
- Model: G200
Bottom ball turner - custom for ball studs, gantry loading system, Torit Dryflo mist collector model DMC-C1 coolant mist extraction and filter system, maximum turning length 15.75 in (400 mm), maximmum nominal tu...
Washington, PA
1999 Mori Seiki SL-150/500 1215
- Manufacturer: Mori Seiki
- Model: SL-150
Power: 3 ph / 50–60 Hz / 200–500 Volts Existing | Weight: 8500 lbs 3855.53 kg | Control: MSC-500 CNC | Turret 1: 12 Position | Tailstock: 20.30 Inch Travel | Spindle bore: 2.20 in 55.88 mm | Spindle nose: A2-5 |...
Washington, PA
1983 Saint Etienne CNC Lathe – Flat Bed
- Manufacturer: Saint Etienne
One or two carriages, tailstock quill travel 12 inch (305mm), steady rests, new servo motors, new servo drives and spindle drive
Washington, PA
CNC Auto-Motion MT360 3 Axis CNC Router
- Manufacturer: CNC Auto-Motion
3 Axis System X Axis Travel: 70" Y Axis Travel: 35" Z Axis Travel: 7" Electrospindle: 7 HP Perske Variable Speed High Frequency Spindle Centroid M39 Control System Electrical: 220/380 V; 3 PH
Warren, PA
1998 Emag VSC160 6M130 09241
- Manufacturer: Emag
- Model: VSC
Montronix TS100 programmable tool monitor, Aercology free standing oil mist collector
Washington, PA1980 Warner & Swasey SC-25-120 Slant Bed 345001042
- Manufacturer: Warner & Swasey
- Model: SC25
Swing over carriage wing: 30 in (762mm), option - front and rear power chucks at additional cost
Washington, PAWarner & Swasey SC32 Slant Bed 2747282
- Manufacturer: Warner & Swasey
- Model: SC32
Ways: Hardened Replaceable | Power: 3 PH / 460V Existing | Weight: 38000.00 lbs 17236.50 kg | Control: New Fanuc 18iTTB or Siemens 840D CNC | Slide 2: End turret, can be used as tailstock also | Turret 1: 6-Stat...
Washington, PA
Tip: Enter manufacturer, model or keyword