Used variable speed

NEW FMS FCS-76-4 FLYING CUT-OFF COLD SAW; REF. NO. M1240

• Manufacturer: Freedom

Model: FMS FCS-76-4 Cutting Type: Cold Saw Cutting Type, Leaves no or minimum burr at the tube end Hands of Operation: Dual Direction - Hand of Operation Line Center Level: To be determined Production Capability...

Wellsaw 1016 #5908

• Manufacturer: Wellsaw
• Model: 1016

Wellsaw 10″ x 16″ Scissor-Type Metal Cutting Band Saw, 1016 Inventory # 5908 Made in USA OR 208v, 230v, 460v / 3ph (Please Specify Desired Voltage at Time of Order) 1″ Blade Reliable power with a 2 HP blade motor...

DOALL 3613-20

• Manufacturer: DoAll
• Model: 3613-20

Enhance your workshop with the DoAll 3613-20 Vertical Bandsaw. This used 36" model features a 26"x26" tilting table, variable band speeds, and comes equipped with a table power feed, blade welder, grinder, and cu...

16" X 22" HEM V100 LM-2 VERTICAL MITRE CUTTING BAND SAW

PRE OWNED HEM V100 LM-2 VERTICAL MITRE CUTTING BAND SAW SN 546697 ! GENERAL SPECIFICATIONS Capacity 18" X 22" Blade at 45 Degree Angle 18” X 15" Blade 15’ X 1.25” Blade Speeds 50 - 500 FPM (INF. VARIABLE) Motor 5...

Wellsaw 1318-SA #8014

• Manufacturer: Wellsaw
• Model: 1318-SA

Wellsaw 13″ x 18″ Semi-Automatic Hydraulic Band Saw, 1318-SA Inventory # 8014 Made in USA OR 2 HP / 115v, 208v, 230v / 1ph (Please Specify Desired Motor at Time of Order) PLC controlled, full cycle semi-automatic...

2012 18" X 27" HE&M WF130HA-DC-C

Blade Size: 1.5 X 21 X .050 Thick. Blade Speed: 90-400 SFPM. Cutting Pressure: 0-1,600 lbs. Blade Feed Rate: 0-3 Inches/Second. Clamping Pressure: 0-2,500 PSI. Automatic Feed Stroke: 0-72 Multiple Index Up to 999...

DoAll 2013-V

• Manufacturer: DoAll
• Model: 2013-V

20" DoAll 2013-V, Used #PR1001 Capacity: 20" | Operation: Manual | Blade size: 1/8" - 1" x 154" | Blade speed (variable): 55 - 5,200 FPM | Table size: 26" x 26" | Table tilt: 45º Right / 10º Left | Table capaci...

Acra RF-1018 SRV

• Manufacturer: Acra
• Model: RF-1018SRV

10" x 18" acra RF-1018 SRV, New #SMRF1018SRV Capacity: . | Operation: Manual | Rectangle (90 degrees): 10' x 18' | Rectangle (45 degrees): 10' x 9 1/2' | Round (90 degrees): 10' | Round ...

W.F. WELLS B-25-4

• Manufacturer: W.F. Wells
• Model: B-25

W.F.Wells 25" Capacity dual column Horizontal bandsaw with semi-Automatic control (1) Used WF Wells Model B-25-4 Semi-Automatic Horizontal Bandsaw Capacity: Tension: Hydraulic Band wheel Size: 26" Machine equippe...

Wellsaw 1318-SA #8014

• Manufacturer: Wellsaw
• Model: 1318-SA

Wellsaw 13″ x 18″ Semi-Automatic Hydraulic Band Saw, 1318-SA Inventory # 8014 Made in USA OR 2 HP / 115v, 208v, 230v / 1ph (Please Specify Desired Motor at Time of Order) PLC controlled, full cycle semi-automatic...

Hyd Mech M16A Horizontal Band Saw

• Manufacturer: Hyd-Mech
• Model: M16A

Pre Owned Hyd-Mech M16A Mitre Cutting Band Saw General Specifications Blade Size 18’ 6” X 1 1/4” Cutting Capacities Rounds 16” Flats 16” X 25” @ 45 Degrees 14” X 16” @ 30 Degrees 9”X 16” Blade Speeds (Variable) 5...

Hyd-Mech Model H-16A Fully automatic Column type bandsaw, w/ Programmable control, Bundling

• Manufacturer: Hyd-Mech
• Model: H16A

Fully Automatic, programmable, Horizontal Column type bandsaw, heavy duty, 16" Capacity, 1.5" Blade, 10 HP variable speed drive, FULL CAPACITY BUNDLING CLAMPS, Hydraulic full travel vises, Hyd-Mech PLC 100 Contro...