Used controller in Illinois, USA

DAVIS STANDARD 10″ 38:1 L/D 18953

• Manufacturer: Davis-Standard

Used Davis Standard Model 100TH100D 10″ 38:1 L/D extruder. Having a eight (8) zone electrically, heated, water cooled and non-vented barrel at a nominal 44″ center-line. S/N L3201. Shop Order 03643. Gearbox has a...

DAVIS STANDARD 1.5″ 20:1 L/D 17504

• Manufacturer: Davis-Standard

One (1) used 1.5″ 20:1 L/D ratio Davis Standard rubber extruder with powered feed roll on throat. Barrel is electrically heated, water cooled (closed loop) and vented at approximately a 42″ centerline height. Inc...

Rebuilt Davis-Standard 6” Extruder Model 60IN60TPIH – 500 HP, 30:1 L/D

• Manufacturer: Davis-Standard
• Model: 60IN60TPIH

51068004 Used Rebuilt Davis-Standard 6" Extruder Model 60IN60TPIH 500 HP, 30:1 L/D. 5/98, 43" center line height, 13.4:1 gearbox having new bearings (less thrust) with cooling unit, heat exchanger, motor driven...

DAVIS STANDARD 75mm 32:1 L/D 18831

• Manufacturer: Davis-Standard

One (1) Used Davis Standard 75mm (2.95″) 32:1 L/D Model DSPW 75IN25 single screw extruder. S/N 72635. SO 80076. Barrel is six (6) zone electrically heated, water cooled(closed loop), and non-vented barrel at a 48...

DAVIS STANDARD 165mm (6.5″) EXTRUDER 19033

• Manufacturer: Davis-Standard

One used (1) Davis Standard model 165MM60T 165mm (6.49″) extruder having a 34:1 L/D ratio with a nine (9) zone electrically heated, water cooled (closed loop), vented and plugged barrel at presently an 89″ center...

DAVIS STANDARD 165MM60TPIH 6.5″ EXTRUDER 10869

• Manufacturer: Davis-Standard

Davis Standard model 165MM60TPIH, S/N X7206 27:1 L/D 150HP DC motor 100RPM screw speed 526HP rated gearbox with a 1.5 service factor. No feed throat, no control panel. Water cooled barrel. Last used as a secondar...

Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled

• Manufacturer: Davis-Standard

10755162 Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1...

NRM / DAVIS STANDARD 1.5″ 16125

• Manufacturer: Davis-Standard

NRM / Davis Standard 1.5″ Pacemaker IV extruder, S/N 19218, S/O 52660. 24:1 L/D air cooled electrically heated barrel with a 42″ to 44-3/4″ adjustable centerline. Driven by a 10 HP 1750/2300 RPM DC motor with Rel...

DAVIS STANDARD 150IN 1.5″ 24:1 17708

• Manufacturer: Davis-Standard

Davis Standard model 150IN DS-20 1.5″ extruder, S/N J6173, 1984 model year, 24:1 L/D vented barrel at a 42″ centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM sc...

NRM/DAVIS STANDARD 3.5PMIV RH/WC VTD/PLGO 12733

NRM / Davis Standard model 3.5PMIV RH/WC VTD/PLGO, 3.5″ extruder, S/N 19222. 24:1 L/D water cooled 7 zone vented and plugged barrel. Approximately 100-150HP DC motor into a belt driven 15.12:1 gearbox with a 1.25...

DAVIS STANDARD 4.5″ 24:1 L/D 19040

• Manufacturer: Davis-Standard

Davis standard model 45IN45 4.5″ extruder. S/N V3255. 24:1 L/D air cooled and non-vented barrel at a center line of 42″. Driven by a Marathon Blue Max 250 HP 460-volt A/C motor thru 17.49:1 304 HP capacity gearbo...

Davis Standard 1.5" Extruder – Model 150IN DS-20, 24:1 L/D, Vented Barrel, 50 HP Gearbox

• Manufacturer: Davis-Standard
• Model: 150IN DS-20

10755179 Used Davis Standard 1.5" Extruder, Model 150IN DS-20. 24:1 L/D vented barrel at a 42" centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM screw speed. Ge...

2.5" Davis Standard / Gala Pilot Plant Pelletizing Line – 75 kW Extruder, Underwater Pelletizer, Spin Dryer, 2020

• Manufacturer: Davis-Standard
• Model: 25

53759005 Used 2.5" Davis Standard/Gala Pilot Plant Pelletizing Line. 2.5" Davis Standard Extruder, Model 25, 24:1 L/D Ratio, 4 zones air cooled barrel, 75 KW HP Capacity, 1.25 SF, 17.26 to 1 gear reduction ratio,...

DAVIS STANDARD 24″ X 48″ 17581

• Manufacturer: Davis-Standard

One (1) used 48″ Davis Standard cooling and polishing stand having three (3) nominal 24″ diameter chrome plated rolls mounted in a vertical arrangement for down stack operation. Rolls are pneumatically actuated. ...

DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19059

• Manufacturer: Davis-Standard

One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having four (4) zone electrically heated and air-cooled barrel. S/N SO816. Shop Order Number 54242. Unit is mounted on a tripod with cas...