Davis Standard / Xaloy 6" Diameter Extruder / Pelletizing line
- Manufacturer: Davis-Standard
10755157 Used Davis Standard / Xaloy 6" pelletizing line consisting of: One (1) Davis Standard 6" model 60IN60TPTH extruder having a 34:1 L/D ratio barrel with a seven (7) zone electrically, heated, water cooled ...
Belvidere, IL- Trusted Seller
DAVIS STANDARD EXTRUDER MDL. MV35IN35SR
- Manufacturer: Davis-Standard
- Model: MV35IN35SR
107364 One (1) Used Davis Standard Extruder Model MV35IN35SR L/D BARREL HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP), AND SIDE VENTED BARREL AT A 52" CENTERLINE HEIGHT. GEARBOX HAS A 5....
Illinois, USA 
Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled
- Manufacturer: Davis-Standard
10755162 Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1...
Belvidere, IL
Rebuilt Davis-Standard 6” Extruder Model 60IN60TPIH – 500 HP, 30:1 L/D
- Manufacturer: Davis-Standard
- Model: 60IN60TPIH
51068004 Used Rebuilt Davis-Standard 6" Extruder Model 60IN60TPIH 500 HP, 30:1 L/D. 5/98, 43" center line height, 13.4:1 gearbox having new bearings (less thrust) with cooling unit, heat exchanger, motor driven...
Belvidere, IL
Davis Standard 9" Extruder, Model 80IN80HT – 32:1 L/D, 900 HP Motor, Built 2001
- Manufacturer: Davis-Standard
10755163 Used Davis Standard 9" Extruder, Model 80IN80HT. 32:1 L/D ratio; (7) zone electrically heated, water cooled (closed loop), and vented barrel at a 44" center-line; 10.15:1 Gearbox reduction ratio; Gearbox...
Belvidere, IL2.5" Davis Standard / Gala Pilot Plant Pelletizing Line – 75 kW Extruder, Underwater Pelletizer, Spin Dryer, 2020
- Manufacturer: Davis-Standard
- Model: 25
53759005 Used 2.5" Davis Standard/Gala Pilot Plant Pelletizing Line. 2.5" Davis Standard Extruder, Model 25, 24:1 L/D Ratio, 4 zones air cooled barrel, 75 KW HP Capacity, 1.25 SF, 17.26 to 1 gear reduction ratio,...
Belvidere, IL
Davis Standard 1.5" Extruder – Model 150IN DS-20, 24:1 L/D, Vented Barrel, 50 HP Gearbox
- Manufacturer: Davis-Standard
- Model: 150IN DS-20
10755179 Used Davis Standard 1.5" Extruder, Model 150IN DS-20. 24:1 L/D vented barrel at a 42" centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM screw speed. Ge...
Belvidere, IL- Trusted Seller
2021 Davis Standard DSR 3.5"
- Manufacturer: Davis-Standard
40HP AC Drive Cord Screw Tube Diameter Range .25″-3″ Includes the Following; -Guill Crosshead GTN525BF -Davis-Standard Silicone Curing IR Tower For tubing up to 3.00” Outer Diameter (x1)System Engineering/ Dry Te...
- Trusted Seller
2014 Davis-Standard Super Blue 75MM
- Manufacturer: Davis-Standard
Used 3″ Davis-Standard Super Blue 75MM Extruder with BPM Bay Plastics Machinery WBX1210-15 Water Bath, EVAK-06 Vacuum Air Knives, and SB 100 Pelletizer, 2014: DS Super Blue Single Screw Extruder: – 3″ (75MM) – L/...
Tip: Enter manufacturer, model or keyword
