Valley City, OH- Trusted Seller
DAVIS STANDARD EXTRUDER MDL. MV35IN35SR
- Manufacturer: Davis-Standard
- Model: MV35IN35SR
107364 One (1) Used Davis Standard Extruder Model MV35IN35SR L/D BARREL HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP), AND SIDE VENTED BARREL AT A 52" CENTERLINE HEIGHT. GEARBOX HAS A 5....
Illinois, USA - Trusted Seller
Davis Standard DS-20 Single Screw Extruder Gearbox 6.53 Ratio 50Hp 152RPM
- Manufacturer: Davis-Standard
- Model: DS-20
Used, in Good Working Condition. Removed From a Working Environment. Gearbox off of a extruder. 1-1/2" Input and output If this item ships as Flat Rate Freight please see details in Shipping tab
$1,350 USDMillersburg, IN - Trusted Seller
3" Davis Standard Single Screw Extruder, Model DS-30, 24:1 L/D, Air Cooled, 40hp
- Manufacturer: Davis-Standard
- Model: DS-30
Used 3" Davis Standard Single Screw Extruder, Model DS-30 40hp WorldWide Electric AC Motor & Drive Package 7.42 Gearbox Ratio, 60hp Capacity with 1.25 Service Factor Pressure Gauge, Amp Gauge & Speed Pod Right to...
United States - Trusted Seller
54" Wide Davis Standard 3-Layer Sheet Extrusion Line
- Manufacturer: Davis-Standard
Used 54" Wide Davis Standard 3-Layer Sheet Extrusion Line Nordson Screen Changer Nordson Screen Changer Beringer Screen Changer 3 Port Die Block, Maag EX90-5GP Melt Pump with Stand, 54" Production Components (Chi...
United States 1999 Davis Standard/NRM PMIV
- Manufacturer: Davis-Standard
Extruder Used Davis Standard/NRM PMIV (1999) Extruder for Sale. This pre-owned Davis Standard/NRM plastic extruder is located in The United States and available to be seen under power for an inspection. If you ...
USA- Trusted Seller
2000 Davis-Standard/Sterling Controls
- Manufacturer: Davis-Standard
2000 Davis-Standard/Sterling Controls Sequencing and heat controls Barber Colman Model Maco 6500 PLC with 1200 point parison programming Condition- Good
Harvey, LA 1987 Davis Standard MV35IN35SR
- Manufacturer: Davis-Standard
- Model: MV35IN35SR
Extruder Used Davis Standard MV35IN35SR (1987) Extruder for Sale. This pre-owned Davis Standard plastic extruder is located in The United States and available to be seen under power for an inspection. If you ha...
USADavis Standard 35IN35
- Manufacturer: Davis-Standard
- Model: 35IN35
Single Screw Extruder Used Davis Standard 35IN35 Extruder for Sale. This pre-owned Davis Standard plastic extruder is located in The United States and available to be seen under power for an inspection. If you ...
USADavis Standard Sheetline
- Manufacturer: Davis-Standard
54" 3 Layer Sheetline Extruder Used Davis Standard Sheetline Extruder for Sale. This pre-owned Davis Standard plastic extruder is located in The United States and available to be seen under power for an inspecti...
USA1999 Davis Standard Single Screw
- Manufacturer: Davis-Standard
Single Screw Extruder Used Davis Standard Single Screw (1999) Extruder for Sale. This pre-owned Davis Standard plastic extruder is located in The United States and available to be seen under power for an inspect...
USA1997 Davis Standard Thermatic 35IN35
- Manufacturer: Davis-Standard
- Model: Thermatic
Extruder Used Davis Standard Thermatic 35IN35 (1997) Extruder for Sale. This pre-owned Davis Standard plastic extruder is located in The United States and available to be seen under power for an inspection. If ...
USA- Trusted Seller
3.5" Davis Standard Cold Feed Rubber Extruder
- Manufacturer: Davis-Standard
3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...
Cleveland, OH - Trusted Seller
Davis Standard 6" Single Screw Extruder System
- Manufacturer: Davis-Standard
The Davis Standard 6" Single Screw Extruder System is a robust piece of used recycling equipment, ideal for processing tasks. It operates with a powerful 400 HP DC motor and drive, facilitating efficient performa...
- Trusted Seller
4.5" Davis Standard Extruder, 30:1 L/D, 150 HP
- Manufacturer: Davis-Standard
4.5" Davis Standard Extruder, 30:1 L/D, 150 HP Used 4.5" Davis Standard Thermatic extruder, model 45IN45HT, 30:1 L/D, air cooled barrel, jacketed feed section, vented barrel, gearbox rated 365 hp, 17.4:1 gearbox ...
Cleveland, OH
Tip: Enter manufacturer, model or keyword
