- Trusted Seller
2" Davis Standard Extruder, Model DS20, 24:1 L/D, Air Cooled
- Manufacturer: Davis-Standard
20 HP DC With Spectrum DC Drive, 42" Centerline Air-Cooled Barrel 3 Barrel Zones, 3 Downstream Zones New Novus N2000 Temperature Controllers Amp Meter, Pressure Gauge, RPM Gauge, Cold Start By-Pass, And Speed Pot...
United States - Trusted Seller
3.5" Davis Standard 35IN35 Extruder, 30:1, 150 HP
- Manufacturer: Davis-Standard
- Model: 35IN35
Used 3.5" Davis Standard 35IN35 Extruder, L/D: 30:1, 150 HP AC Motor Single Screw, Non-Vented, 6 Downstream Zones Max HP Capacity: 158, SF:1.25, Extruder RPM: 100 150 Hp Reliance RPM AC Motor, Inverter Duty 460/3...
United States 
94mm Davis Standard Gemini Twin Screw Extruder
- Manufacturer: Davis-Standard
94mm Davis Standard Gemini Twin Screw Extruder Model GP94 Air-Cooled Barrel, Top Vented With Vacuum Pump 5 Barrel Zones, 8 Die Zones, Eurtotherm 2208 Temperature Controllers 75 HP Reliance DC Motor And Bardac DC ...
Davis Standard/Xaloy 3.5″ Pelletizing Line, 125 HP – 2008
- Manufacturer: Davis-Standard
Davis Standard/Xaloy 3.5″ Pelletizing Line, 125 HP – 2008 Model: 35IN35 / 3.5in 3.5″ Davis Standard Thermatic Single Screw Extruder 34:1 L/D Vented Barrel Vent Located 78″ from Feed Throat 6 Water Cooled Barrel...
Rockville Centre, NY- Trusted Seller
66" Davis Standard/Mega Coex Sheet Line With 4.5" and 2.5" Extruders
- Manufacturer: Davis-Standard
66" Wide Sheet Line Consisting Of The Following Pieces: 4.5" Davis Standard 45IN45 Extruder, 32:1 L/D Ratio, 17.49:1 Gearbox Ratio, 300 HP 1788 RPM Marathon AC Inverter Duty Motor(NEW IN 2016) And Mitsubishi Driv...
United States - Trusted Seller
Extruder, 4-1/2" Dia, Davis Standard, 24:1, 200 HP #A740570
- Manufacturer: Davis-Standard
Davis Standard extruder, Model 450S D8770. 4-1/2" diameter, non-vented type, driven by 200 HP main motor. Includes control panel. Previously used in plastic production applications.
California, USA 
DAVIS STANDARD
- Manufacturer: Davis-Standard
"DAVID STANDARD" for cold feed Extruder with universal head to install die. In good operating condition. 4" screwdiameter, length 90" Approximately 20:1 L/D ratio For hot feeding and with mechanical roller/ ...
Leon, Mexico- Trusted SellerAuction
LINE 1 CONSISTING OF: - DAVIS STANDARD CO-EX THERMATIC EXTRUDERS 4 ½” 30:1 AIR COOLED
- Manufacturer: Davis-Standard
- Model: Thermatic
LINE 1 CONSISTING OF: - DAVIS STANDARD CO-EX THERMATIC EXTRUDERS 4 ½” 30:1 AIR COOLED EXTRUDER W/ 200HP AC DRIVE (A), 4 ½” 24:1 AIR COOLED EXTRUDER W/ 200HP AC DRIVE AND ASR (B), TWO MANUEL SCREEN CHANGE...
Vaughan, CanadaVisit Auction Website - Trusted Seller
150mm-Davis-Standard-single-screw
- Manufacturer: Davis-Standard
150mm Davis Standard single screw extruder model 60IN60TPIH. Double vented, water cooled. 42D, 375kw dc motor,90/90 22kw gear pump. 102 RPM screw 1996 Electrically heated water cooled barrel with cast aluminium h...
Swindon, United Kingdom 
Mono 90 extruder
- Manufacturer: Davis-Standard
Monorosca extruder 90 mm Diameter: 3.5" (90mm) | L/d: 25 | Thread: with Madok mixer | Dc motor, with converter: 75 CV | Resistances: in aluminum block | Temperature controllers: electronics
- Trusted Seller
2021 Davis Standard DSR 3.5"
- Manufacturer: Davis-Standard
40HP AC Drive Cord Screw Tube Diameter Range .25″-3″ Includes the Following; -Guill Crosshead GTN525BF -Davis-Standard Silicone Curing IR Tower For tubing up to 3.00” Outer Diameter (x1)System Engineering/ Dry Te...
- Trusted Seller
2014 Davis-Standard Super Blue 75MM
- Manufacturer: Davis-Standard
Used 3″ Davis-Standard Super Blue 75MM Extruder with BPM Bay Plastics Machinery WBX1210-15 Water Bath, EVAK-06 Vacuum Air Knives, and SB 100 Pelletizer, 2014: DS Super Blue Single Screw Extruder: – 3″ (75MM) – L/...
Tip: Enter manufacturer, model or keyword
