Used Extruders in California, USA

3" MERRITT EXTRUDER

• Manufacturer: Merritt

3" MERRITT EXTRUDER 75 HP AC MOTOR 125 MAX RPM 5 BARREL ZONES ONE DIE ZONE HOPPER,SPARE SCREW , BARREL CLAMP AND 14 HOLE STRAND DIE 42" CENTER HEIGHT

Selmi Chocoform Extruder

• Manufacturer: Selmi

Selmi Chocoform Extruder - Built new in 2018 - Serial number 39 - Single head extrusion

Lened I INCH 3 Zone Vari Speed Extruder

• Manufacturer: Lened

LENED I INCH 3 ZONE VARI SPEED EXTRUDER

Aeromatic Nica E-140 Extruder, S/S

• Manufacturer: Aeromatic-Fielder

Aeromatic Nica E-140 Extruder, S/S Used Aeromatic Nica extruder, model E-140, stainless steel construction, nominally rated 0.5-4 liters/minute, with 0.5 hp and 1 hp motors, 230 volt, serial# 605D-058, built 1991.

Extruder, Belt Puller, C/st, 1 HP, Right to Left #S739221

Extrusion Belt Puller - Carbon steel unit with a right-to-left belt measuring 4" x 30". Includes digital speed control and powered by a 1 HP, 180/200V motor operating at 1750 RPM.

Extruder, Mixer, 6", S/st, 10 HP, Pasta #C736485

Pasta mixer/ extruder, stainless steel, complete with 3' x 3' x24" deep tapered bottom hopper with single wand agitator and 6" diameter twin lead screw discharge. Provisions for addition of die plate at screw dis...

Extruder, 4”, Single Screw, Bonnot, Jacketed, 15 HP, Mild Steel, #5991343

• Manufacturer: Bonnot

Bonnot single screw extruder, model 4", featuring a mild steel barrel and screw with an approximately 4" diameter x 46" long jacketed barrel. The extruder has an 8" x 16" hopper feed size and is driven by a 15 HP...

Extruder, 4" Dia, Marlen, S/st, Twin Piston, Masa #S742875

• Manufacturer: Marlen

Marlen Twin Piston Continuous Pumping Extruder, model 750, used for corn masa or potato based snack. Product outlet is 4" diameter triple-clamp, Piston size (diameter/stroke) 6" x 14", rated for a maximum output ...

Extruder, 10" Dia, Bonnot, 304 S/st, 10 HP, #S741078

• Manufacturer: Bonnot

Bonnot extruder, 304 stainless steel, jacketed, trough measures 24" x 24" x 32" deep, has 4-1/2" diameter shaft, approximately 15-1/2 diameter x 40" long. Unit is driven by 10 Hp 285/76 volt, 3000/600 rpm 2 speed...

Vickers Hydraulic Extruder,

• Manufacturer: Vickers

Vickers Hydraulic Extruder,

Extruder, 11.25" Dia, C/st, DB Technologies, Hydraulic #S744539

• Manufacturer: DB Technologies

DB Technologies Extruder "Struder-Press Machine," 11.25" diameter die plate with 3/16" diameter perforations. Product is fed through hopper and pushed by hydraulically driven ram to discharge. Includes hopper inf...

Extruder, 2.5" dia, NRM, Mdl 2-5-24.1, 40 HP, Plastics, #S739219

• Manufacturer: NRM

NRM extruder, 2.5" diameter x 24" long plastics extruder, model 2-5-24.1 PM IV RH-1CANVTD, single head carbon steel extruder. Unit is electrically heated, air cooled 4 zone non-vented barrel, water reed throat wi...

Extruder, Twin Screw, 57mm, Werner & Pfleiderer, Model ZSK, 75 HP #4839652

• Manufacturer: WP

Werner & Pfleiderer (Coperion) model ZSK 57mm Twin Screw Extruder. Features co-rotating twin-screw extruder with (10) barrel process sections, 40:1 L/D process section, electrically heated barrels. Driven by 75 H...

Extruder, Sterling, 3-1/2", 21:1 L/d, Plastic, 50 HP, #C323075

• Manufacturer: Sterling

Sterling Extruder, 3.5" Dia. 21:1 L/D Ratio - Electrically heated with a screw RPM of 120. Powered by a 50 HP motor for 230/440V operation. Serial number 35247.