Used Machine Tools in Saxony, Germany

WMW AP 510x270x65

• Manufacturer: WMW

very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...

WMW ALU 4200x2000

• Manufacturer: WMW

Aluminum plate with 800 clamping holes, M8; countersunk Ø 11,5 x 15mm with 4 clamping holes, M24 The plate is placed on a wooden support frame.

WMW ALU 4000x1700

• Manufacturer: WMW

Cast aluminum plate, finished This plate can be used for assembly work on both sides. Numerous clamping holes (M8) evenly arranged on the plate. By means of lift/chassis (welded/screwed) the aluminum plate stands...

STOLLE AP 5500x2150x340

• Manufacturer: STOLLE

Material cast steel Milled, finished surface T-slots according to DIN 650: a=28; h=46; b=48; c=21mm Center distance 150 / 230 mm

bolster plate AP 5500x1890x380

3 clamping plates (price per plate) Weights: No. 1 = 8000kg; No. 2 = 9000kg; No.3 = 8500kg Material: Cast iron T-slots according to DIN 650 Slots lengthwise Number 6 Size a=36mm,h=64mm,b=60mm,c=25mm Center distan...

bolster plate AP 2000 x 1500 (Nr.1 - Nr.6)

There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x f...

WMW AW1000x800x640

• Manufacturer: WMW

clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm

J+P pneumatic punch

Pneumatic punch press J+P, JAGOW + PFEIFER GmbH STZ-KO Used, tested!

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !

WMW AW 330x310

• Manufacturer: WMW

Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...

VIRAX thread cutting stock

Pipe threading stock, Threading stock VIRAX Type 62 in a plastic case, one hinge is broken used, tested!

R. HOFHEINZ magnetic coupling

Magnetic coupling R. HOFHEINZ & Co. 24VDC New! Clutch housing: Ø 133 mm | Hollow shaft diameter: Ã 32 mm | Wavelength: 52 mm | Groove width: 10 mm | Dimensions (magnetic coupling): 133 x 133 x 64 mm | Dimensions ...

VEM magnetic coupling

• Manufacturer: VEM

magnetic coupling VEM 3KL2.5 Ø 20 mm 1 groove Dimensions: Ø 100 x 60 mm

PAGUS external slats

• Manufacturer: Pagus

Outer slats, 2 pieces PAGUS 181 x 130 x 2.7 mm Other quantities on request! New !

ORTLINGHAUS inner slats

• Manufacturer: ORTLINGHAUS WERKE GmbH

Inner slats, 2 pieces ORTLINGHAUS WERKE GmbH 3002-340-39-000000 Other quantities on request! New !