Used Machine Tools in Quebec, Canada

Trusted Seller
1992 YAM (22 X 100)
Capacity: OVER THE BED: 22", OVER THE CARRIAGE: 11", IN THE BREAK: 29.5" WORKING LENGTH: BETWEEN POINTS: 100" Attachment: TAILPOINT: MT4
Québec City, Canada
1989 O-M VT5-16N
- Manufacturer: O-M
1 ONLY USED CNC Vertical Boring Mill MAKE OM MADE IN JAPAN Year: 1989 Model: VT5-16N Chuck / Table Dia 63" Swing 80" Work Ht-U/R 62.99" Maximum Turning Length 63 in RPM 275 RPM Power 75 hp Equipped Wit...
Montreal, Canada
FORTUNE VT+-15
- Manufacturer: Fortuna
1 ONLY USED CNC LATHE MAKE FORTUNE MODEL VT+-15 EQUIPPED WITH 6" CHUCK EQUIPPED WITH FANUC O1-TC CONTROLS EQUIPPED WITH 12 STATION TURRET EQUIPPED WITH TAILSTOCK EQUIPPED WITH TOOL HOLDERS EQUIPPED WITH 1...
Montreal, Canada
Trusted Seller
2010 OMAS CEB
- Manufacturer: Omas
Machine, including AME 1500 Payoff, .075” and .1065” Feed Rollers Set of feed rollers .135 & .1483” Set of standard tooling .1065” Set of special tooling .135” Software: Omas is Bosch, Electrical. machine a...
Montreal, Canada
SMI Silver 3
- Manufacturer: SMI
Silver 3 The special feature of the bending arm, installed on the SILVER series of machines, offers the possibility of choosing from different lengths (1.100, 1.400 or 1.600 or others) in relation to the product...
Pointe-Claire, Canada
SMI SYNTHESIS 226 Tube Bender
- Manufacturer: SMI
SYNTHESIS 226 The mandrel tube bending machine model SYNTHESIS 226 is mainly used for bending non ferrous alloys and ferrous metal tubes, pre cut-to-length without burrs. The principle of this machine is the sync...
Pointe-Claire, Canada
SMI SYNTHESIS 226
- Manufacturer: SMI
SYNTHESIS 226 The mandrel tube bending machine model SYNTHESIS 226 is mainly used for bending non ferrous alloys and ferrous metal tubes, pre cut-to-length without burrs. The principle of this machine is the sync...
Pointe-Claire, Canada
Trusted Seller
2020 REBEL CNC HYDRAULIC SHEAR 10' X 1/4"
- Throat depth: 101.6 mm
CUTTING CAPACITY: MILD STEEL: 8MM | STAINLESS STEEL: 5.3MM
Québec City, Canada
Trusted Seller
ALLSTEEL SHEAR 12′ X 1/4
- Manufacturer: Allsteel
Working length: 12' | Capacity: 1/4 steel 3/16 stainless | Speed: 14 @ 53 STROKES/MINUTE | Backgauge stroke: 36" | Engine: 25HP | Voltage: 600V/3PH/60HZ
Québec City, Canada
SMI Silver 3 CD
- Manufacturer: SMI
Silver 3 CD This is a fully electric bending machine, that utilizes, in line, burr-free and chipless orbital cutting, mandrel-less bending, drilling and end-forming, all in automatic cycle. The machinery can proc...
Pointe-Claire, Canada
SMI SYNTHESIS 166
- Manufacturer: SMI
SYNTHESIS 166 The tube bender SYNTHESIS is mainly used for bending light metal and steel tubes, pre cut to length, without burrs. Moreover it can bend hybrid tubes with deformations on both ends. The principle o...
Pointe-Claire, Canada
SMI SYNTHESIS 166 Tube Bender
- Manufacturer: SMI
SYNTHESIS 166 The tube bender SYNTHESIS is mainly used for bending light metal and steel tubes, pre cut to length, without burrs. Moreover it can bend hybrid tubes with deformations on both ends. The principle of...
Pointe-Claire, Canada
Trusted Seller
Haco TS-3006 shears ( 10′ X ¼)
- Manufacturer: Haco - Atlantic
- Model: TS 3006
Product no.: US8134 | Backstop travel: 750 mm / 29.5'' | Rear stops: 1000 mm / 39'' | Capacity: ¼'' / 6mm | Working length: 3050 mm / 10' / 120'' | Number of strokes minutes: 8~14 | Angle adjustment: 0.5°~3° | V...
Québec City, Canada
Trusted Seller
ALLSTEEL 10′ X 3/8″
- Manufacturer: Allsteel
Capacity: 24 TONS, SOFT STEEL: 3/8", stanless steel: ¼", aluminium: ½". STANLESS STEEL: ¼", ALUMINIUM: ½"
Québec City, Canada
BROWN & BOGGS 40-2 1/2F
- Manufacturer: Brown Boggs
USED PUNCH PRESS MAKE BROWN & BOGGS MODEL 40-2 1/2F 40 TONS EQUIPPED WITH AIR CLUTCH/AIR BRAKE EQUIPPED WITH 2 1/2" STROKE EQUIPPED WITH 8" SHUT HEIGHT BED AREA 28 1/4" X 18 1/2" EQUIPPED WITH PORTABLE FO...
Montreal, Canada